TASCAM DP-32 8514 - Using CDsThis opens the MASTER WRITE screen that shows alist of songs that have recorded master files.4. Use the JOG/DATA dial to select (highlight blue)only one song to write to the CD-R/CD-RW, andthen press the F2 (4) button.A check mark 4 appears in the box next to theselected song.NOTETo remove a check mark 4 from a box, press the F2 (4)button again while the song is selected (highlighted blue).5. To use noise shaped dithering, press the F3 (NSD)button to check (4) the box.6. Press the F4 (t) button.A pop-up window appears asking whether you wantto finalize the disc when the writing completes.TIPFinalize the disc if you do not plan to add any more tracks tothe CD-R/CD-RW. (See "Finalizing a CD" on page 86.)7. To finalize, use the JOG/DATA dial to select ON,otherwise, select OFF, and then press the F4 (t)button again (default: OFF).The confirmation message shown below appears.8. Press the F2 (YES) button to begin writing to theCD-R/CD-RW.Using LIVE WRITER1. When in Multi Track mode, press the CD buttonto open the CD menu.2. Place a blank CD (unused CD-R/CD-RW disc or acompletely erased CD-RW) on the disc tray.3. Use the JOG/DATA dial to select (highlight blue)LIVE WRITER and then press the F4 (t) button.This opens the LIVE WRITER screen where you candivide master files at mark points.At this time, if no master file has been created or nomark has been set, a messages appears.4. To use noise shaped dithering, press the F3 (NSD)button to check (4) the box.5. The column for TRACK 1 shows the song name,the columns for TRACK 2 and after show the markname.Press the F4 (t) button and the followingconfirmation message will appear.6. Press the F2 (YES) button to begin writing to theCD-R/CD-RW.
