Tascam DP-32 Digital Portastudio Owner's Manual

Also see for DP-32 Digital Portastudio: Troubleshooting supplement Schematic diagram

Contents

Tascam DP-32 Digital Portastudio Owner's Manual Manual pdf 83 page image

TASCAM DP-32 8314 - Using CDsWith TAO, the CD-R/CD-RW is not automatically finalized.Note that even though an unfinalized CD-R/CD-RW canbe played in this unit, it cannot be played by ordinary CDplayers.After you have written all the master files to a disc thatyou want using TAO, finalize the disc. (See "Finalizing aCD" on page 86.)You cannot add more tracks to a CD-R/CD-RW that hasbeen finalized.ª LIVE WRITER functionYou can use marks to divide a master file into multipleparts, and write them as multiple tracks to a disc.Using Disc At OnceUse Disc At Once when you have selected multiple tracks.Using DAO, you can set the order of multiple tracks as youlike. Moreover, you can set the length of silent pauses andadd them between songs.NOTEWhen using DAO, you can also make multiple discs with thesame contents. When doing so, use identical discs (samemanufacturer, type and capacity).1. When in Multi Track mode, press the CD buttonto open the CD menu.2. Place a blank CD (unused CD-R/CD-RW disc or acompletely erased CD-RW) on the disc tray.3. Use the JOG/DATA dial to select (highlight blue)MASTER WRITE and then press the F4 (t) button.This opens the MASTER WRITE screen that shows alist of songs that have recorded master files.4. Use the JOG/DATA dial to select (highlight blue)songs which you want to write to CD-R/CD-RW, andpress the F2 (4) button to select the desired songs(selected songs have check marks 4 in the boxesnext to them).NOTETo remove the check mark 4 from a check box, press theF2 (4) button again while the song is selected (highlightedblue).5. Repeat step 4 above as necessary.6. To use noise shaped dithering, press the F3 (NSD)button to check (4) the box.7. After you finish selecting songs, press the F4 (t)button.The WRITE SONG LIST screen opens. On thisscreen, you can change the order that the master fileswill be written to the CD-R/CD-RW and set the lengthof the gaps between them.8. To change the song order, press the F2 (ORDER)button to open the WRITE SONG ORDER screen(song order change screen).9. Use the JOG/DATA dial or the CURSOR (5/b)buttons to select (highlight blue) the song that youwant to put in different order, and then press theF2 (MOVE) button.4 appears before the song name.