TASCAM DP-32 8916 – MessagesGeneral messagesThe following list shows messages that could appear during the use of this unit.These messages alert you to conditions that might arise while you are using the unit. Consult the table below if you seesomething you do not understand or if you want to know how to solve a problem.Message Description and remedyCan not Import This pop-up appears when the sample frequency or bit rate of the selected file in the AUDIO DEPOTIMPORT menu differs from the current song.Cannot ClearCurrentThe current track cannot be deleted.A virtual track assigned to a physical track cannot be deleted.Card Error The card could not be recognized properly. Replace the card.Card Full The card has no remaining capacity. Erase unnecessary files or move them to your computer to makeopen space.Empty ExportTrackYou tried to export a track that does not contain any recording data.This pop-up appears if you try to export a song track that does not contain a recording. (See "Exportingtracks" on page 79.)Export a song track that has a recording.Export FileToo BigThe track to be exported exceeds the available capacity on the SD card.You have tried to export a track to the AudioDepot folder, but the size is too large for the remainingspace on the SD card.Delete unnecessary songs or files from the AudioDepot folder to create more space on the SD card, thentry to export the track again.File Not FoundThe file to be imported could not be found.You tried to import a WAV file from the AudioDepot folder, but there are no WAV files in it. (See"Importing tracks" on page 78.)Connect the unit to a computer and transfer files that you want to import from the computer to theAudioDepot folder of the unit.Format ErrorFormat CARDThe formatting of the card is abnormal or corrupted. This message also appears if you used a computerconnected via USB to format the card in FAT format and if an unformatted card is inserted in the unit.Always use the DP-32 to format cards to be used with it. Replace the card or format it using the FORMATmenu.FAT formatting erases all data currently on the card.I/O Too Short The interval between IN and OUT points is too short.You tried to use repeat mode, but the time between the IN and OUT points is too short.Import FailedExport Failed Importing or exporting failed.Import FileToo LargeThe size of file to be imported is too large.You tried to import a WAV file from the AudioDepot folder that is too large for the remaining space onthe SD card. Free up some space in the AudioDepot folder by deleting unnecessary songs, and try again.In Bounce Mode Bounce mode is active.You tried to perform an action that is not possible while in Bounce mode.In Master Mode Mastering mode is active.You tried to perform an action that is not possible while in Mastering mode.In Punch Mode Auto punch mode is active.You tried to perform an action that is not possible while in auto punch mode.In Repeat Mode Repeat playback mode is active.You tried to perform an action that is not possible while in repeat playback mode.Invalid Card The inserted SD card is in a format the cannot be used by this unit.Insert another SD card after turning off the unit, or format the card using FORMAT on the MENU screen.Invalid CardChange Card Something might be wrong with the card. Replace the card.Mark FullIt is not possible to add more location marks.You tried to store more than 99 location marks in a song. (See "Location marks" on page 51.)Delete some location marks and try again.Master FileNot FoundA master file could not be found.This message appears if you try to enter Mastering mode, but you have not made any mixdownrecording yet. First make a mixdown recording.