58 TASCAM DP-328 - Track Editingª IN/OUT/TOTo change the IN/OUT/TO points, exit the TRACK EDITscreen, and set them again as necessary.ª TARGET TrackThis is the track that is edited. In the case of OPEN, CUT,SILENCE and CLEAN OUT, the source track itself is the targettrack.The options depend on what you have set for theSOURCE track.When the SOURCE track is ALL (all tracks) , theTARGET track must also be ALL (all tracks).ª TIMESSet the number of times that the copied section will bepasted between 1 and 99.COPY/PASTEThis function copies the audio data from between the INand OUT points on the source track, and pastes it on thetarget track starting from the TO point. This operationdoes not change the source track between the IN andOUT points.This operation overwrites recorded data on the targettrack. Therefore, the length of the target track is notchanged.You can make multiple copies in a single operation.In other words, you can overwrite the target track fromthe TO point with a designated number of repetitions ofthe source data.The following parameters are used in this operation.• SOURCE Track• IN/OUT/TO• TARGET• TIMESCOPY/INSERTThis function copies the audio data from between the INand OUT points on the source track, and inserts it on thetarget track starting from the TO point. This operationdoes not change the source track between the IN andOUT points.This operation inserts recorded data into the target track.The recorded data on the target track after the TO point isoffset by the amount of time used by the inserted audiodata. Therefore, the target track becomes longer.You can make multiple copies in a single operation. Inother words, you can insert a designated number ofrepetitions of the data into the target track from the TOpoint.The following parameters are used in this operation.• SOURCE Track• IN/OUT/TO• TARGET• TIMES
