Tascam DP-32 Digital Portastudio Owner's Manual

Also see for DP-32 Digital Portastudio: Troubleshooting supplement Schematic diagram

Contents

Tascam DP-32 Digital Portastudio Owner's Manual Manual pdf 84 page image

84 TASCAM DP-3214 - Using CDs10. Use the JOG/DATA dial to change the song position.Press the F2 (SELECT) button to confirm.To change the order of multiple songs, repeat thesteps 9 and 10 above.11. When the song order is as you want, press the F1(g) button to return to the WRITE SONG LISTscreen.12. To change the gap between the songs, press the F3(GAP) button.The WRITE SONG GAP screen opens.13. Use the CURSOR (5/b) buttons to select (highlightblue) the song for which you want to change thelength of the gap that follows it, and then use theJOG/DATA dial to set the gap length.The song gap can be set between 0.0 to 9.9 seconds,in 0.1-second units.NOTETo change the gap between multiple songs, repeat step 13above.14. You can also press the F2 (ALL) button to set allgaps at once.Use the JOG/DATA dial to set the gap between thesongs.Press F2 (SET) to confirm the setting and return to theWRITE SONG GAP screen.15. Once you have completed setting the gaplengths, press the F1 (g) button to return to theWRITE SONG LIST screen.16. After you have finished changing the song orderand song gap settings, press the F4 (t) button.17. When the confirmation message appears, press theF2 (YES) button to confirm.CD-R/CD-RW writing starts.NOTEIf you want to cancel the writing, press the F1 (NO) button toreturn to the WRITE SONG LIST screen.18. When writing completes, a message appearsasking whether you want to write another CD-R/CD-RW with the same contents.If you want to burn another CD-R/CD-RW with thesame contents, press the F2 (YES) button. If youdo not want to burn another disc, press the F1 (NO)button.Using Track At OnceWhen using Track At Once, after one track is written, atwo-second gap is added after it.1. When in Multi Track mode, press the CD buttonto open the CD menu.2. Place a blank CD (unused CD-R/CD-RW disc or acompletely erased CD-RW) on the disc tray.NOTEIf you put a CD-R/CD-RW that has been used previously towrite tracks using Track At Once and has not been finalized,you can add another track to it. In this case, no pop-upwindow to confirm erasure of the CD-RW appears.3. Use the JOG/DATA dial to select (highlight blue)MASTER WRITE and then press the F4 (t) button.