Scan WorkCentre ® 5945/5955User Guide 293Setting the Original Type for Single-Touch ScansThe Single-Touch Scan feature is a fast and convenient way to scan a document and send it to apredefined scan destination on your computer or network location.Your System Administrator will create a button on the device touch screen for each Single-TouchScan destination (up to 10 buttons) and can customize the color scheme, logo and instructionaltext that displays when you select the Single-Touch Scan button. Your System Administrator canalso change the name of the Single-Touch Scan button.The Single-Touch Scan service can be configured with scan settings already specified so that youcan scan your document quickly. Your System Administrator can also customize the service so thatyou can select the Build Job, Output Color, Original Type, 2-Sided Scanning and File Name settingseach time you scan your document.Note: This option must be made available by your System Administrator.If Authentication or Accounting has been enabled on your device you may have to enter logindetails to access the Single-Touch Scan feature.Use the Original Type options to define the type of original being scanned. Making the correctselection enhances the quality of your output image.1. Load your documents face up in the document feeder input tray. Adjust the guide to just touchthe documents.OrLift up the document feeder. Place the document face down onto the document glass andregister it to the arrow at the top left corner. Close the document feeder.2. Press the Clear All button on the control panel to cancel any previous programming selections.3. Press the Services Home button.4. Select the Single-Touch Scan button on the touch screen.Note: Your System Administrator can customize the name of the Single-Touch Scan button.Check with your System Administrator if you do not see a Single-Touch Scan button on thetouch screen.5. Select the Original Type option required.• Photo and Text produces high quality pictures but slightly reduces the sharpness of textand line art. This setting is recommended for originals containing high quality photographsor line art and text.• Photo gives the best quality for photos but reduced quality text and line art. It is the bestoption for originals containing photos or continuous tones without any text or line art.• Text produces sharper edges and is recommended for text and line art.• Map is used if your original is a map.• Newspaper / Magazine is used if your original is from a magazine or newspaper thatcontains photographs or text.Note: The Text option requires less transmission time.6. Select the How Original was Produced option required.• Printed produces the best results for newspaper, magazine, map and other professionallyprinted originals.• Photocopied is used for most photocopied and laser printed originals.• Photograph is recommended for originals containing high quality photographs onphotographic paper.
