January 2007iiiWorkCentre 7132IntroductionReversion 4.0About this ManualThis Service Manual is part of the multinational documentation system forWorkCentre 7132. The Service Documentation is used in order to diagnose machine malfunc-tions, adjust components and has information which is used to maintain the product in superioroperating condition. It is the controlling publication for a service call. Information on its use isfound in the Introduction of the Service Documentation.This manual contains information that applies to NASG (XC) and ESG (XE) copiers.Service Manual RevisionThe Service Manual will be updated as the machine changes or as problem areas are identi-fied.OrganizationThis Service Manual is divided into eight sections. The titles of the sections and a descriptionof the information contained in each section are contained in the following paragraphs:Section 1: Service Call ProceduresThis section contains procedures that determine what actions are to be taken during a servicecall on the machine and in what sequence they are to be completed. This is the entry level forall service calls.Section 2: Status Indicator RAPsThis section contains the diagnostic aids for troubleshooting the Fault Code and non-FaultCode related faults (with the exception of image quality problems).Section 3: Image QualityThis section contains the diagnostic aids for troubleshooting any image quality problems, aswell as image quality specifications and image defect samples.Section 4: Repairs/AdjustmentsThis section contains all the Adjustments and Repair procedures.RepairsRepairs include procedures for removal and replacement of parts which have the followingspecial conditions:When there is a personnel or machine safety issue.When removal or replacement cannot be determined from the exploded view of theParts List.When there is a cleaning or a lubricating activity associated with the procedure.When the part requires an adjustment after replacement.When a special tool is required for removal or replacement.Use the repair procedures for the correct order of removal and replacement, for warnings, cau-tions, and notes.AdjustmentsAdjustments include procedures for adjusting the parts that must be within specification for thecorrect operation of the system.Use the adjustment procedures for the correct sequence of operation for specifications, warn-ings, cautions and notes.Section 5: Parts ListsThis section contains the Copier/Printer Parts List.Section 6: General Procedures/InformationThis section contains General Procedures, Diagnostic Programs, and Copier/Printer Informa-tion.