Xerox WorkCentre 7132 Service Documentation

Also see for WorkCentre 7132: Quick use guide Setup guide Supplementary guide Paper guide Quick network setup guide

Contents

January 20073-10 WorkCentre 7132IQ9Reversion 4.0Image QualityIQ9 Skew/Misregistration RAPThis RAP is used when Skew, System Registration, or Magnification are out of specification.For Color-to-Color-Misregistration, go to the IQ8 RAP.Initial ActionsLoad some new, dry 24 lb. 11X17/A3 Xerox COLOR Xpressions (USSG), or 90 GSM Colortech+ (ESG) into each paper tray (use 8.5X11/A4 in Tray 1). Make 3 full color copies from eachpaper tray. Mark the appropriate paper tray on these copies.ProcedureThe problem is still present when using the proper paper.Y NExplain to the customer that new, dry, 24 lb. Xerox COLOR Xpressions (USSG), or 90GSM Colortech + (ESG) paper is specified for is machine.The problem occurs only in the printer mode.Y NThe defect occurs when the document is manually registered on the platen glass.Y NEnsure that the Document Transport Belt is clean. Check the Document HandlerAdjustments (ADJ 15.1.1 through ADJ 15.1.6). If the problem continues, check theDADF drive rolls and pinch rolls for wear or glossing.The problem is SkewY NThe problem is MisregistrationY NAdjust the IIT Lead Edge/Side Edge Registration (ADJ 11.1.1) and the IOTLead Edge/Side Edge Registration (ADJ 9.1.1).Print Pattern 58. Misregistration is present on the copyY NAdjust the IOT Lead Edge/Side Edge Registration (ADJ 9.1.1), then the IITLead Edge and Side Edge Registration (ADJ 11.1.1).The defect occurred on copies from all five paper trays.Y NCheck the IOT Lead Edge/Side Edge Registration (ADJ 9.1.1) for that tray.Check the feeder for the affected tray for wear, slipping, damage, or contami-nation.• Tray 1 Feeder (PL 14.3)• Tray 2 Feeder (PL 14.3)• Tray 3 Feeder (PL 14.1)• MSI Feed Assembly (PL 9.2)Registration varies from copy to copy.Y NGo to ADJ 9.1.1, Lead/Side Edge Adjustment.Check the components in the Registration Transport Assembly (PL 2.5) for wear,slipping, damage, or contamination. Clean/replace as requiredThe defect occurred on copies from all five paper trays.Y NCheck the components in the Registration Transport Assembly (PL 2.5) for wear,slipping, damage, or contamination. Clean/replace as requiredCheck the IOT Lead Edge/Side Edge Registration (ADJ 9.1.1) for that tray.Check the feeder for the affected tray for wear, slipping, damage, or contamination.• Tray 1 Feeder (PL 14.3)• Tray 2 Feeder (PL 14.3)• Tray 3 Feeder (PL 14.1)• MSI Feed Assembly (PL 9.2)The problem occurs on all jobs.Y NHave the customer re-evaluate affected jobs and resend.Refer to the User Guide.AABBCC