1 Outline1.3.2 SERVOPACK Part Names1-41.3.2 SERVOPACK Part NamesThis section describes the part names of SERVOPACKs.Use a SERVOPACK together with a converter. For details, refer to 1.7 Combinations for Multi-Winding DriveSystems.Note: For the purpose of this description, the SERVOPACK is shown with the front cover removed. Always keep the frontcover attached when using the SERVOPACK.Rotary switch (S1001) Do not use this switch. –DIP switch (S1002) Do not use this switch. –MS1 LED indicator This indicator cannot be used. –MMA, MM2, MM3, and MM4LED indicatorsLights green when local communications areready. –Panel operator keys Used to set parameters. 2.1 OverviewGround terminal Used to protect against electrical shock.Be sure to ground this terminal. 3.1 Main Circuit Wiring(cont’d)No. Name Description ReferenceNo. Name Description Reference DIP switch (S3) Do not use this switch. – Rotary switch (S2) Do not use this switch. – Power LED indicator(POWER)Indicates that the control power is being supplied(green). – CN5 connector Do not use this connector. –With plastic cover open M-II
