YASKAWA JUSP-MD D01A Series User Manual

Also see for SGDV-COA: User manual

Contents

YASKAWA JUSP-MD D01A Series User Manual Manual pdf 289 page image

8 Monitor Displays (Un)8.6.3 Safety Input Signal Display Example8-108.6.3 Safety Input Signal Display ExampleSafety input signals are displayed as shown below.• When the /HWBB1 signal turns OFF to activate the HWBB function8.7 Monitor Display at Power ONWhen Un number is set using Pn52F, the data of Un that was specified in the panel operator is displayedwhen the power is turned ON.When 0FFF is set (factory setting), the status display mode (bb, run) is selected at power ON.The bottom segment ofthe number 1 is lit.7 6 5 4 3 2 18AnalogPn52FMonitor Display at Power ON ClassificationSetting Range Setting Unit Factory Setting When Enabled0000 to 0FFF − 0FFF Immediately SetupSpeed Position Torque