7 Utility Functions (Fn)7-207.11 Servomotor Model Display (Fn011)This function is used to check the model, voltage, capacity, encoder type, and encoder resolution of the servo-motor connected to the multi-winding drive unit. If the multi-winding drive unit has a special specification,the specification number is also displayed.(1) PreparationThere are no tasks that must be performed before the execution.(2) Operating ProcedureUse the following procedure.Step Display afterOperation Keys Operation1 Press the MODE/SET Key to select the utility function.2 Press the UP or DOWN Key to select Fn011.3Press the DATA/SHIFT Key for approximately one secondto display the servomotor voltage and model codes.4Press the MODE/SET Key to display the servomotor capac-ity.5Press the MODE/SET Key to display the encoder type andresolution codes.6Press the MODE/SET Key to display the multi-windingdrive unit’s special specification number.The display "y.0000" means standard model.If anything other than "y.0000" is displayed, a customizeddevice is being used.MODE/SET DATA /MODE/SET DATA/MODE/SET DATA / Servomotor VoltageCode Type200 VAC,280 VDC400 VAC,560 VDC0102Servomotor ModelCode ModelSGMVV-BSGMVV-D7173MODE/SET DATA /Servomotor capacity in units of 10 WThe above example indicates 22 kW.MODE/SET DATA/ Encoder TypeCode TypeIncremental00Multiturnabsolute value01Encoder ResolutionCode Resolution20-bit20MODE/SET DATA/Code for custom orders
