YASKAWA SGD7S-*A20**F62 Series Product Manual

Contents

6.2 List of Servo Parameters6-26Pn5112 Input Signal Selections50000 toFFFF – 6543 All Afterrestart Setup *1Pn5122 Output Signal InverseSettings0000 to1111 – 0000 All Afterrestart Setup *1Continued on next page.Continued from previous page.ParameterNo.SizeName SettingRangeSettingUnitDefaultSettingApplicableMotorsWhenEnabledClassi-ficationRefer-encen.X/DEC (Origin Return Deceleration Switch Input) Signal Allocation0 Active when CN1-13 input signal is ON (closed).1 Active when CN1-7 input signal is ON (closed).2 Active when CN1-8 input signal is ON (closed).3 Active when CN1-9 input signal is ON (closed).4 Active when CN1-10 input signal is ON (closed).5 Active when CN1-11 input signal is ON (closed).6 Active when CN1-12 input signal is ON (closed).7 The signal is always active.8 The signal is always inactive.9 Active when CN1-13 input signal is OFF (open).A Active when CN1-7 input signal is OFF (open).B Active when CN1-8 input signal is OFF (open).C Active when CN1-9 input signal is OFF (open).D Active when CN1-10 input signal is OFF (open).E Active when CN1-11 input signal is OFF (open).F Active when CN1-12 input signal is OFF (open).n.X/EXT1 (External Latch Input 1) Signal Allocation0 to 3 The signal is always inactive.4 Active when CN1-10 input signal is ON (closed).5 Active when CN1-11 input signal is ON (closed).6 Active when CN1-12 input signal is ON (closed).D Active when CN1-10 input signal is OFF (open).E Active when CN1-11 input signal is OFF (open).F Active when CN1-12 input signal is OFF (open).7 to C The signal is always inactive.n.X/EXT2 (External Latch Input 2) Signal Allocation0 to F The allocations are the same as the /EXT1 (External Latch Input 1) signal allo-cations.n.X/EXT3 (External Latch Input 3) Signal Allocation0 to F The allocations are the same as the /EXT1 (External Latch Input 1) signal allo-cations.n.XOutput Signal Inversion for CN1-1 and CN1-2 Terminals0 The signal is not inverted.1 The signal is inverted.n.XOutput Signal Inversion for CN1-23 and CN1-24 Terminals0 The signal is not inverted.1 The signal is inverted.n.XOutput Signal Inversion for CN1-25 and CN1-26 Terminals0 The signal is not inverted.1 The signal is inverted.n.X Reserved parameter (Do not change.)