8.2 Operation in Monitor Mode8-38 Monitor Modes (Un)8.2 Operation in Monitor ModeThe example below shows how to display the contents of monitor number Un000 (when the servomotorrotates at 1500 min -1 )Step Display afterOperation Keys Operation1 Press the MODE/SET Key to select the monitor mode.2 If Un000 is not displayed, press the UP or DOWN Key toselect Un000.3 Press the DATA/SHIFT Key for approximately one sec-ond to display the data of Un000 (motor speed).4 Press the DATA/SHIFT Key for approximately one sec-ond to return to the display of step 1.MODE /SET DATA /MODE/SET DATA/MODE/SET DATA/MODE/SET DATA/
