5 Peripheral Devices5.5.1 Specifications5-165.5 Base Mounting UnitsWhen mounting servo drivers to bases, use the following base mounting units.5.5.1 SpecificationsNote: The input current that is given above is the current for one base mounting unit.5.5.2 Power Regeneration Converter and SERVOPACK Combinations(1) Power Regeneration Converter(2) SERVOPACK SERVOPACK for One AxisModel Unit Width(mm)Cooling Fan Terminal BlockInputVoltage(VDC)InputCurrent(A)TerminalScrewWire Sizes(AWG)TighteningTorque(Nxm)JUSP-JUBM050AA 50240.42M3.5 24 to 120.8 to 1.2Nxm(7.1 to 10.6lbfxin)JUSP-JUBM075AA 75 0.94JUSP-JUBM100AA 100 0.94JUSP-JUBM150AA 150 1.88Power Regeneration Converter Base Mounting UnitInput Voltage Model ModelThree-phase 200 VACCACP-JU15A3JUSP-JUBM100AACACP-JU19A3CACP-JU22A3CACP-JU30A3 JUSP-JUBM150AAThree-phase 400 VACCACP-JU15D3JUSP-JUBM100AACACP-JU19D3CACP-JU22D3SERVOPACK Base Mounting UnitInput Voltage Model Model270 VDCCACR-JU028ACA JUSP-JUBM050AACACR-JU036ACACACR-JU065ACA JUSP-JUBM075AACACR-JU084ACAJUSP-JUBM150AACACR-JU102ACACACR-JU125ACA540 VDCCACR-JU014DCA JUSP-JUBM050AACACR-JU018DCACACR-JU033DCA JUSP-JUBM075AACACR-JU042DCA JUSP-JUBM150AACACR-JU051DCA
