Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones266PermittedValues Integer within 6 digitsDefault BlankWeb UI Features->Audio->Redial ToneParameter account.X.dial_tone[1] .cfgDescriptionIt configures the dial tone for the phone.Note: It is not applicable to CP960 phones.PermittedValues0-Default (depend on the country tone by “voice.tone.country”)1-440/250,0/2502-1000/250,0/250Default 0Parameter features.voice_mail_tone_enable .cfgDescriptionIt enables or disables the phone to play a warning tone when it receives a new voice mail.Note: It works only if “account.X.display_mwi.enable” is set to 1 (Enabled).PermittedValues0-Disabled1-EnabledDefault 1Web UI Features->General Information->Voice Mail ToneParameter features.send_key_tone .cfgDescriptionIt enables or disables the phone to play a key tone when a user presses a send key.Note: It works only if “features.key_tone” is set to 1 (Enabled).PermittedValues0-Disabled1-EnabledDefault 1Web UI Features->Audio->Send ToneParameter features.key_tone .cfgDescription It enables or disables the phone to play a key tone when a user presses any key on your phone keypad.PermittedValues0-Disabled1-EnabledDefault 1Web UI Features->Audio->Key TonePhone UI Settings->Basic Settings->Sound->Key Tone->Key ToneRing TonesRing tones are used to play for incoming calls. You can select a built-in ring tone or a custom ring tone for the phonesystem or specific line registration. To set the custom ring tones, you need to upload the custom ring tones to the IPphone in advance.
