Administrator’s Guide for SIP-T58V/T58A/T56A/CP960 IP Phones62If it is set to “any”, you can use IP address or any domain name to access the web user interface of thephone.Default anyWeb Server Type ConfigurationYealink phones support both HTTP and HTTPS protocols for accessing the web user interface. You can configure theweb server type. Web server type determines access protocol of the web user interface. If you disable to access webuser interface using the HTTP/HTTPS protocol, both you and the user cannot access the web user interface.The following table lists the parameters you can use to configure web server type.Parameter static.wui.http_enable[1] .cfgDescription It enables or disables to access the web user interface of the phone over a non-secure tunnel (HTTP).PermittedValues0-Disabled1-EnabledDefault 1Web UI Network->Advanced->Web Server->HTTPPhone UI Settings->Advanced Settings (default password: admin) ->Network->Web Server->HTTPS StatusParameter static.network.port.http[1] .cfgDescription It configures the port used to access the web user interface of the phone over a non-secure tunnel(HTTP).PermittedValues Integer from 1 to 65535Default 80Web UI Network->Advanced->Web Server->HTTP Port (1~65535)Phone UI Settings->Advanced Settings (default password: admin) ->Network->Web Server->HTTP PortParameter static.wui.https_enable[1] .cfgDescription It enables or disables to access the web user interface of the phone over a secure tunnel (HTTPS).PermittedValues0-Disabled1-EnabledDefault 1Web UI Network->Advanced->Web Server->HTTPSPhone UI Settings->Advanced Settings (default password: admin) ->Network->Web Server->HTTPS StatusParameter static.network.port.https[1] .cfgDescription It configures the port used to access the web user interface of the phone over a secure tunnel (HTTPS).PermittedValues Integer from 1 to 65535Default 443Web UI Network->Advanced->Web Server->HTTPS Port (1~65535)
