Phone Network43Internet Port and PC Port ConfigurationThe following table lists the parameters you can use to configure Internet port and PC port.Parameter static.network.pc_port.enable[1] .cfgDescriptionIt enables or disables the PC port.Note: It is not applicable to CP960 phones.PermittedValues0-Disabled1-Auto NegotiationDefault 1Web UI Network->PC Port->PC Port ActiveParameter static.network.internet_port.speed_duplex[1] .cfgDescriptionIt configures the network speed over Ethernet of the Internet port.Note: You can set the transmission speed to 1000Mbps/Auto Negotiation to transmit in 1000Mbps if thephone is connected to the switch supports Gigabit Ethernet. We recommend that you do not change thisparameter.PermittedValues0-Auto Negotiation1-Full Duplex 10Mbps2-Full Duplex 100Mbps3-Half Duplex 10Mbps4-Half Duplex 100Mbps5-Full Duplex 1000MbpsDefault 0Web UI Network->Advanced->Port Link->WAN Port LinkParameter static.network.pc_port.speed_duplex[1] .cfgDescriptionIt configures the network speed over Ethernet of the PC port.Note: It works only if “static.network.pc_port.enable” is set to 1 (Auto Negotiation). You can set the trans-mission speed to 1000Mbps/ Auto Negotiation to transmit in 1000Mbps if the phone is connected to theswitch supports Gigabit Ethernet. We recommend that you do not change this parameter. It is not applic-able to CP960 phones.PermittedValues0-Auto Negotiation1-Full Duplex 10Mbps2-Full Duplex 100Mbps3-Half Duplex 10Mbps4-Half Duplex 100Mbps5-Full Duplex 1000MbpsDefault 0Web UI Network->Advanced->Port Link->PC Port Link
