Configuration Parameters427PermittedValues String within 99 charactersDefault GroupCommonWeb UI Applications->Broadsoft XSI->Network Directory->Group Common (if bw.enable =1)Parameter bw.calllog_and_dir .cfgDescriptionIt enables or disables the phone to directly enter the Network Calls screen when tapping (forT58V/T58A/T56A)/History (for CP960) on the idle screen.Note: It works only if "bw.xsi.enable" and "bw.xsi.call_log.enable" are set to 1 (Enabled).PermittedValues0-Disabled, the phone will enter Local Calls screen when tapping (for T58V/T58A/T56A)/History (forCP960).1-EnabledDefault 0Parameter search_in_dialing.bw_directory.enable .cfgDescription It enables or disables the phone to automatically search entries from the BroadSoft directory, and displaythe results on the pre-dialing/dialing screen.PermittedValues0-Disabled1-EnabledDefault 0Parameter search_in_dialing.bw_directory.priority .cfgDescription It configures the search priority of the BroadSoft directory.PermittedValues Integer greater than or equal to 0Default 5Parameter directory_setting.bw_directory.enable .cfgDescription It enables or disables the users to access the BroadSoft directory by pressing the Directory/Dir soft key.PermittedValues0-Disabled1-EnabledDefault 0Parameter directory_setting.bw_directory.priority .cfgDescription It configures the display priority of the BroadSoft directory.PermittedValues Integer greater than or equal to 0Default 6Broadsoft Visual Voice MailParameter bw.voice_mail.visual.enable .cfgDescriptionIt enables or disables the visual voice mail feature for the IP phone.Note: It works only if “bw.xsi.enable" is set to 1 (Enabled). It is not applicable to CP960 phones.
