Panasonic HYBRID IP-PBX KX-TDA100 manuals
HYBRID IP-PBX KX-TDA100
Table of contents
- Table Of Contents
- Location of Controls
- Before Operating the Handset
- Selecting the Fwd/DND Icon
- Entering the Standby Display Name
- Adjusting the Ringer Volume
- Adjusting the Vibrate Setting
- Handset Display
- Soft Keys
- Operation Outline
- Operation for KX-TAW848/TDA50/100/200
- Receiving Calls
- When the Dialed Extension is Busy/No Answer
- During a Conversation
- Making Use of the Voice Mail Service
- Using the Handset Phonebook
- Entering Characters
- Locking the Handset Phonebook
- Deleting Stored Items
- Setting the Handset and Base Unit
- Troubleshooting and Error Messages
- Error Messages
- Important Information
HYBRID IP-PBX KX-TDA100
Table of contents
- Table Of Contents
- Location of Controls
- Before Operating the Handset
- Setting the Date and Time
- Entering the Standby Display Name
- Adjusting the Ringer Volume
- Adjusting the Vibrate Setting
- Handset Display
- Soft Keys
- Operation Outline
- Operation for the KX-TA308/624/824
- making calls
- Receiving Calls
- When the Dialed Extension is Busy/No Answer
- During a Conversation
- Making Use of the Voice Mail Service
- Using the Handset Phonebook
- Entering Characters
- Locking the Handset Phonebook
- Deleting Stored Items
- Setting the Handset and Base Unit
- Troubleshooting and Error Messages
- Error Messages
- Important Information
HYBRID IP-PBX KX-TDA100
Table of contents
HYBRID IP-PBX KX-TDA100
Table of contents
- feature guide
- about the other manuals
- feature highlights
- list of abbreviations
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Call Handling Features
- Incoming Call Features
- Direct In Line (DIL)
- Direct Inward Dialling (DID)/Direct Dialling In (DDI)
- Multiple Subscriber Number (MSN) Ringing Service
- Calling Line Identification (CLI) Distribution
- Intercept Routing
- Intercept Routing—No Destination
- Internal Call Features
- Internal Call Block
- Incoming Call Indication Features
- Ring Tone Pattern Selection
- Call Waiting
- Receiving Group Features
- Incoming Call Distribution Group Features
- Group Call Distribution
- Outside Destinations in Incoming Call Distribution Group
- Queuing Feature
- VIP Call
- Overflow Feature
- Log-in/Log-out
- Supervisory Feature
- Call Forwarding (FWD)/Do Not Disturb (DND) Features
- Call Forwarding (FWD)
- Do Not Disturb (DND)
- FWD/DND Button, Group FWD Button
- Answering Features
- Line Preference—Incoming
- Call Pickup
- Hands-free Answerback
- Making Call Features
- Automatic Extension Release
- Intercom Call
- Trunk Call Features
- Emergency Call
- Account Code Entry
- Dial Type Selection
- Reverse Circuit
- Trunk Busy Out
- Pause Insertion
- Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
- Special Carrier Access Code
- Seizing a Line Features
- Line Preference—Outgoing
- Trunk Access
- Memory Dialling Features
- One-touch Dialling
- KX-T7710 One-touch Dialling
- Last Number Redial
- Speed Dialling—Personal/System
- Quick Dialling
- Hot Line
- Primary Directory Number (PDN)/Secondary Directory Number (SDN) Features
- Busy Line/Busy Party Features
- Executive Busy Override
- Call Monitor
- Second Call Notification to Busy Extension
- Call Waiting Tone
- Off-hook Call Announcement (OHCA)
- Whisper OHCA
- Toll Restriction (TRS)/Call Barring (Barring) Features
- Budget Management
- Extension Dial Lock
- Dial Tone Transfer
- Walking COS
- Verification Code Entry
- Automatic Route Selection (ARS) Features
- Conversation Features
- Off-hook Monitor
- Mute
- Headset Operation
- Data Line Security
- Flash/Recall/Terminate
- External Feature Access (EFA)
- Trunk Call Limitation
- Parallelled Telephone
- Calling Party Control (CPC) Signal Detection
- Transferring Features
- Holding Features
- Call Park
- Call Splitting
- Music on Hold
- Conference Features
- Conference
- Privacy Release
- Paging Features
- Broadcasting Features
- Optional Device Features
- Door Open
- Trunk Answer From Any Station (TAFAS)
- Background Music (BGM)
- Outgoing Message (OGM)
- Direct Inward System Access (DISA)
- Automatic Fax Transfer
- Built-in Simplified Voice Message (SVM)
- External Sensor
- External Relay Control
- Caller ID Features
- Incoming Call Log
- Message Features
- Absent Message
- Proprietary Telephone (PT) Features
- Flexible Buttons
- LED Indication
- Display Information
- Integrated Services Digital Network (ISDN) Service Features
- Calling/Connected Line Identification Presentation (CLIP/COLP)
- Advice of Charge (AOC)
- Call Forwarding (CF)—by ISDN (P-MP)
- Call Forwarding (CF)—by ISDN (P-P)
- Call Hold (HOLD)—by ISDN
- Call Transfer (CT)—by ISDN
- Three-party Conference (3PTY)—by ISDN
- Malicious Call Identification (MCID)
- Completion of Calls to Busy Subscriber (CCBS)
- ISDN Extension
- ISDN Service Access by Keypad Protocol
- E1 Line Service Features
- T1 Line Service Features
- Voice Mail Features
- Voice Mail DTMF Integration
- Voice Mail DPT (Digital) Integration
- Portable Station (PS) Features
- PS Ring Group
- PS Directory
- PS Feature Buttons
- Wireless XDP Parallel Mode
- Virtual PS
- Administrative Information Features
- Printing Message
- Call Charge Services
- Hospitality Features
- Room Status Control
- Call Billing for Guest Room
- Extension Controlling Features
- Extension Feature Clear
- Walking Extension
- Timed Reminder
- Audible Tone Features
- Confirmation Tone
- Networking Features
- Voice over Internet Protocol (VoIP) Network
- Virtual Private Network (VPN)
- QSIG Standard Features
- Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name Identification Presentation (CNIP/CONP)—by QSIG
- Call Forwarding (CF)—by QSIG
- Call Transfer (CT)—by QSIG
- Completion of Calls to Busy Subscriber (CCBS)—by QSIG
- QSIG Enhanced Features
- Centralised Voice Mail
- Network ICD Group
- PS Roaming by Network ICD Group
- IP Proprietary Telephone (IP-PT) Features
- Computer Telephony Integration (CTI) Features
- PC Phone/PC Console
- Cellular Phone Features
- System Configuration and Administration Features
- System Configuration—Hardware
- System Configuration—Software
- Group
- Tenant Service
- Time Service
- Operator Features
- Manager Features
- System Data Control
- PT Programming
- Password Security
- Quick Setup
- Automatic Setup
- Flexible Numbering/Fixed Numbering
- Floating Extension
- Software Upgrading
- Fault Recovery/Diagnostics
- Power Failure Restart
- Local Alarm Information
- Appendix
- Capacity of System Resources
- voice message
- Exclusive Features Table
- Tones/Ring Tones
- Revision History
- KX-TDA100/KX-TDA200 PMPR Software File Version 1.1xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 2.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.2xxx
- KX-TDA30 PSMPR Software File Version 1.1xxx
- KX-TDA30 PSMPR Software File Version 2.0xxx
- KX-TDA30 PSMPR Software File Version 2.2xxx
- KX-TDA30 PSMPR Software File Version 3.0xxx
- KX-TDA30 PSMPR Software File Version 4.0xxx
- Index
HYBRID IP-PBX KX-TDA100
Table of contents
- installation manual
- system components
- important safety instructions
- Table Of Contents
- Table Of Contents
- Table Of Contents
- System Outline
- System Highlights
- hospitality features
- Basic System Construction
- System Connection Diagram
- Options
- Specifications
- Characteristics
- System Capacity
- cards mounted on other optional service cards
- Installation
- Before Installation
- Installation of the Hybrid IP-PBX
- Names and Locations
- Opening/Closing the Front Cover
- closing the front cover
- Installing/Replacing the Power Supply Unit
- replacing the power supply unit
- Frame Earth Connection
- Backup Batteries Connection
- Installing/Removing the Optional Service Cards
- covering the blank slots
- handling of the cables
- Types of Connectors
- Attaching a Ferrite Core
- Fastening Amphenol Type Connector
- amphenol connector pin assignment chart
- Wall Mounting (KX-TDA200)
- Wall Mounting (KX-TDA100)
- Floor Standing (KX-TDA200 Only)
- Surge Protector Installation
- Installation of the Main Processing Card
- MEC Card
- RMT Card
- Installation of the Trunk Cards
- DID8 Card
- CID/PAY8 Card
- CID8 Card
- E&M8 Card
- T1 Card
- E1 Card
- BRI4 and BRI8 Cards
- PRI30 Card
- PRI23 Card
- IP-GW4 Card
- IP-GW4E Card
- IP-GW16 Card
- CSIF4 and CSIF8 Card
- DHLC8 Card
- DLC8 Card
- DLC16 Card
- SLC8 Card
- EXT-CID Card
- SLC16 and MSLC16 Cards
- IP-EXT16 Card
- Installation of the Other Cards
- DPH4 Card
- DPH2 Card
- EIO4 Card
- connection diagram for external sensor
- ECHO16 Card
- MSG4 Card
- CTI-LINK Card
- Connection of Extensions
- Parallel Connection of the Extensions
- Digital extra device port connection
- First Party Call Control CTI Connection
- Connection of DECT Portable Stations
- Procedure Overview
- Site Planning
- Before Site Survey
- Site Survey Using the KX-TCA255/KX-TD7590
- After Site Survey
- Connecting a Cell Station to the Hybrid IP-PBX
- Wall Mounting
- Connection of 2.4 GHz Portable Stations
- Site Survey
- Connection of Doorphones, Door Openers, External Sensors, and External Relays
- Connection of Peripherals
- Power Failure Connections
- Starting the Hybrid IP-PBX
- confirming the trunk connection
- Guide for the KX-TDA Maintenance Console
- Overview
- Connection
- Installation of the KX-TDA Maintenance Console
- Troubleshooting
- Operation
- Using the Reset Button
- Troubleshooting by Error Log
- Appendix
- Revision History
- Version 2.0
- Index
- Table Of Contents
- Table Of Contents
HYBRID IP-PBX KX-TDA100
Table of contents
- user manual
- important information
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Before Operating the Telephones
- Making Calls
- calling an outside party
- Easy Dialling
- Redial
- When the Dialled Line is Busy or There is No Answer
- Calling without Restrictions
- walking cos
- Changing the dialling mode (Pulse to Tone Conversion)
- Accessing the ISDN Service (ISDN Service Access)
- Alternating the Calling Method (Alternate Calling — Ring/Voice)
- To Access Another Party Directly from Outside (Direct Inward System Access [DISA])
- to call an outside party
- Receiving Calls
- Answering Hands-free (Hands-free Answerback)
- Answering a Call Ringing at Another Telephone (Call Pickup)
- Answering a Call via an External Speaker or an External Ringer (Trunk Answer From Any Station [TAFAS])
- Using the ANSWER/RELEASE Button
- Identifying Malicious Calling Parties (Malicious Call Identification [MCID])
- During a Conversation
- Holding a Call
- Talking to Two Parties Alternately (Call Splitting)
- Answering a Call Waiting
- Multiple Parties Conversation
- leaving a conference
- Mute
- Letting Other People Listen to the Conversation (Off-Hook Monitor)
- Saving a Number (Notebook Function)
- Before Leaving Your Desk
- To set/cancel
- Set at another extension
- Showing a Message on the Caller's Telephone Display (Absent Message Capability)
- Preventing Other People from Using Your Telephone (Electronic Extension Lockout)
- Making/Answering an Announcement
- Answering/Denying a Paged Announcement
- Setting the Telephone According to Your Needs
- Refusing Incoming Calls (Do Not Disturb [DND])
- 1.7.3 Receiving a Call Waiting (Call Waiting/Off-Hook Call Announcement [OHCA]/Whisper OHCA
- Displaying Your Telephone Number on the Called Party and Caller's Telephone (Calling Connected Line Identification Presentation [CLIP/COLP])
- Preventing Your Number Being Displayed on the Called Party's Telephone (Calling Line Identification Restriction [CLIR])
- Denying Other People the Possibility of Picking up Your Calls (Call Pickup Deny)
- Denying Other People the Possibility of Joining Your Conversation (Executive Busy Override Deny)
- Turning on the Background Music
- Protecting Your Line against Indication Tones (Data Line Security)
- Checking the Time Service Status
- Setting the Parallel Connected Telephone Ringer (Parallelled Telephone)
- Clearing the Feature Settings at Your Extension (Extension Programme Clear)
- Utilizing the Call Center
- Monitoring and Controlling the Call Status of a Receiving Group
- Forwarding a Waiting Call (Hurry-up Transfer)
- Using User-supplied Equipment
- opening the door
- If an External Sensor is Connected
- If an External Relay is Connected
- If a Host PBX is Connected
- If a Voice Processing System is Connected
- After Moving to a New Location in the Office
- Using the Proprietary Telephone (KX-T7XXX Services) or the Porgtable Station KX-TD7690)
- Using the Directories
- entering characters
- Accessing the System Features (System Feature Access)
- manager operation
- Extension Control
- changing the settings
- System Control
- Turning on the External Background Music
- Recording Messages
- Record from external music source
- Customising Your Phone (Personal Programming)
- Initial Settings
- Customising the Buttons
- Customising Your System (System Programming)
- Date and Time Set (000)
- System Speed Dialling Number Set (001)
- System Speed Dialling Name Set (002)
- Extension Number Set (003)
- Extension Name Set (004)
- Troubleshooting
- Feature Number Table
- What is This Tone
HYBRID IP-PBX KX-TDA100
Table of contents
- important information
- important safety instructions
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Operation
- Before Operating the Telephones
- when you use a panasonic proprietary telephone
- Basic Operations
- Answering Calls
- Telephone Features and Operation
- Account Code Entry
- Alternate Calling—Ring/Voice
- BGM (Background Music)
- Call Hold
- Call Monitor
- call park retrieve
- Call Pickup
- Call Splitting
- Call Transfer
- to transfer with one touch (one-touch transfer)
- CALL WAITING FEATURES
- answering call waiting in the pbx
- Call Waiting Tone
- Character Entry
- Conference
- Conference, Unattended
- Data Line Security
- to call an extension
- to call an outside party
- DND (Do Not Disturb)
- dnd override
- Door Open
- Doorphone Call
- EFA (External Feature Access)
- Extension Dial Lock
- Extension Feature Clear
- Extension PIN (Personal Identification Number)
- External Relay
- FWD (Call Forwarding)
- fwd/dnd settings using fixed fwd/dnd button
- Hands-free Answerback
- Hands-free Operation
- Headset Operation
- HOSPITALITY FEATURES
- Hot Line
- ICD GROUP FEATURES
- ICD Group Features—Incoming Call Queue Monitor
- ICD Group Features—Log-in/Log-out
- ICD Group Features—Log-in/Log-out Monitor and Remote Control
- ICD Group Features—Manual Queue Redirection
- ICD Group Features—Supervisory
- Message Waiting
- Mute
- Off-hook Monitor
- One-touch Dialing
- Paging
- Paralleled Telephone
- PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension (KX TDA100/KX-TDA200/KX-TDA600 only)
- Printing Message
- Privacy Release
- Private Network Features—CLIP (Calling Line Identification Presentation)
- Private Network Features—COLP (Connected Line Identification Presentation)
- Private Network Features—TIE Line Access
- Quick Dialing
- Speed Dialing, Personal
- Speed Dialing, System
- TAFAS (Trunk Answer From Any Station)
- Timed Reminder
- Time Service
- VOICE MAIL FEATURES
- Voice Mail Features—Two-way Record
- Voice Mail Features—Voice Mail Integration
- Wake-up Call
- Walking COS
- Walking Extension
- Whisper OHCA
- Wireless XDP Parallel Mode
- Display Features
- Call Log, Outgoing
- Directories
- storing new names and numbers
- System Feature Access
- call pickup group
- Manager Operation
- Manager Service Features
- OGM (Outgoing Messages)
- Private Network Features—NDSS (Network Direct Station Selection) Monitor Release
- Remote Extension Dial Lock
- Customizing Your Phone & System
- Personal Programming
- Programming Feature Clear
- Customizing the Buttons
- Manager Programming
- System Programming
- Appendix
- Troubleshooting
- Feature Number Table
- Tone
- Revision History
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.0xxx
- KX-TDA50 PSMPR Software File Version 1.1xxx
- KX-TDA50 PSMPR Software File Version 3.0xxx
- Index
HYBRID IP-PBX KX-TDA100
Table of contents
- user manual
- feature highlights
- important information
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Operation
- Before Operating the Telephones
- when you use a panasonic proprietary telephone
- how to follow the steps
- connection example
- Making Calls
- calling an outside party
- making a call to a private network (tie line access)
- Easy Dialling
- Redial
- When the Dialled Line is Busy or There is No Answer
- Accessing the ISDN Service (ISDN Service Access)
- Alternating the Calling Method (Alternate Calling—Ring/Voice)
- Calling without Restrictions
- To Access Another Party Directly from Outside (Direct Inward System Access [DISA])
- Setting Your Telephone from Another Extension or through DISA (Remote Setting)
- Receiving Calls
- Answering Hands-free (Hands-free Answerback)
- Answering a Call Ringing at Another Telephone (Call Pickup)
- Answering a Call via an External Speaker (Trunk Answer From Any Station [TAFAS])
- Using the ANSWER/RELEASE Button
- Identifying Malicious Calling Parties (Malicious Call Identification [MCID])
- During a Conversation
- transferring to an outside party using the pbx service
- Holding a Call
- Talking to Two Parties Alternately (Call Splitting)
- Answering Call Waiting
- answering call waiting from the telephone company
- Multiple Party Conversation
- Mute
- Letting Other People Listen to the Conversation (Off-hook Monitor)
- Using the Headset (Headset Operation)
- Before Leaving Your Desk
- Using Voice Messaging (Built-in Simplified Voice Message [SVM]) (KX-TDA30 only)
- recording a greeting message for each time mode
- redirecting your calls to your message box
- leaving voice messages
- listening to voice messages left by callers
- accessing your message box from an outside telephone
- Showing a Message on the Caller's Telephone Display (Absent Message)
- Preventing Other People from Using Your Telephone (Extension Dial Lock)
- Making/Answering an Announcement
- Answering/Denying a Paging Announcement
- Making an Announcement and Having a Multiple Party Conversation (Broadcasting)
- Setting the Telephone According to Your Needs
- Refusing Incoming Calls (Do Not Disturb [DND])
- Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/Whisper OHCA)
- Displaying Your Telephone Number on the Called Party and Caller's Telephone (Calling Connected Line Identification Presentation [CLIP/COLP])
- Preventing Your Telephone Number Being Displayed on the Caller's Telephone (Connected Line Identification Restriction [COLR])
- Preventing Other People from Joining Your Conversation (Executive Busy Override Deny)
- Turning on the Background Music (BGM)
- Protecting Your Line against Notification Tones (Data Line Security)
- Checking the Time Service Status
- Setting the Parallelled Telephone to Ring (Parallelled Telephone)
- Using Your PS in Parallel with a Wired Telephone (Wireless XDP Parallel Mode)
- Clearing Features Set at Your Extension (Extension Feature Clear)
- Utilising the Call Centre
- Monitoring and Controlling the Call Status of an Incoming Call Distribution Group (Incoming Call Distribution Group Monitor)
- Forwarding a Waiting Call (Manual Queue Redirection)
- Using User-supplied Equipment
- If an External Relay is Connected
- If an External Sensor is Connected
- If a Host PBX is Connected
- If a Voice Processing System is Connected
- private mode
- recording a conversation
- After Moving to a New Location in the Office
- Using a Display Proprietary Telephone
- Using the Directories
- storing names and numbers
- entering characters
- Accessing System Features (System Feature Access)
- Manager Operation
- Control Features
- Time Service Mode Control
- Restriction Level Control (Dial Tone Transfer)
- Turning on the External Background Music (BGM)
- Recording Outgoing Messages (OGM)
- Allowing Users to Seize an Unavailable Outside Line (Trunk Busy Out)
- Using the Telephones in a Hotel-type Environment (Hospitality Features)
- recording room information using a room extension
- Releasing Network Direct Station Selection (NDSS) Monitor
- Customising Your Phone & System
- Customising Your Phone (Personal Programming)
- Settings on the Programming Mode
- clearing features
- Customising the Buttons
- Manager Programming
- Customising Your System (System Programming)
- System Programming
- Appendix
- Troubleshooting
- Feature Number Table
- What is This Tone
- Revision History
- KX-TDA100/KX-TDA200 MPR Version 2.0
- KX-TDA30 MPR Version 1.1
- KX-TDA30 MPR Version 2.0
- KX-TDA30 MPR Version 2.2
- Index
HYBRID IP-PBX KX-TDA100
Table of contents
- user manual
- feature highlights
- important information
- important safety instructions
- save these instructions
- Table Of Contents
- Table Of Contents
- Operation
- Before Operating the Telephones
- your extension number
- when you use a panasonic proprietary telephone
- customized buttons
- how to follow the steps
- connection example
- Making Calls
- calling an outside party
- co line group access
- tie line access
- Easy Dialing
- personal speed dialing
- system speed dialing
- quick dialing
- Redial
- automatic callback busy cancel
- call waiting
- executive busy override
- call monitor
- Alternate Calling—Ring/Voice
- Calling without Restrictions
- Direct Inward System Access (DISA)
- Remote Setting
- Receiving Calls
- Hands-free Answerback
- Trunk Answer From Any Station (TAFAS)
- ANSWER/RELEASE Button
- During a Conversation
- transferring to an outside party using the pbx service
- Call Hold
- call park
- call park retrieve
- Call Splitting
- Call Waiting
- answering call waiting from the telephone company
- Multiple Party Conversation
- unattended conference
- leaving three-party conference
- privacy release
- Mute
- Headset Operation
- Absence Settings
- Absent Message
- Extension Lock
- Paging
- Answering/Denying a Paging Announcement
- Extension Settings
- Do Not Disturb (DND)
- Call Waiting/Off-hook Call Announcement (OHCA)/Whisper OHCA
- Calling Line Identification Presentation (CLIP)
- Executive Busy Override Deny
- Data Line Security
- Wireless XDP Parallel Mode
- Extension Feature Clear
- Call Center
- Incoming Call Distribution Group Monitor
- monitoring the status of waiting calls
- monitoring and changing the log-in/log-out status of extensions
- Manual Queue Redirection
- User-supplied Equipment
- External Relay
- External Sensor
- Voice Processing System
- live call screening (lcs)
- Walking Extension
- Display Proprietary Telephone
- outgoing call log
- Directories
- storing names and numbers
- entering characters
- System Feature Access
- Manager Operation
- Control Features
- Dial Tone Transfer
- Outgoing Messages (OGM)
- Hospitality Features
- to check in
- to check out
- recording room information using a room extension
- Network Direct Station Selection (NDSS) Monitor Release
- Customizing Your Phone & System
- Personal Programming
- Settings on the Programming Mode
- setting features
- clearing features
- Customizing the Buttons
- Manager Programming
- System Programming
- Appendix
- Troubleshooting
- Feature Number Table
- Tone
- Revision History
- Index
- Table Of Contents
- Table Of Contents
- Table Of Contents
HYBRID IP-PBX KX-TDA100
Table of contents
- user manual
- feature highlights
- important information
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Operation
- Before Operating the Telephones
- using a navigator key/jog dial/volume key
- when you use a panasonic proprietary telephone
- how to follow the steps
- connection example
- Making Calls
- calling an outside party
- using an account code (account code entry)
- Easy Dialling
- using numbers stored in the pbx (system speed dialling)
- using a preprogrammed number (quick dialling)
- Redial
- When the Dialled Line is Busy or There is No Answer
- Accessing the ISDN Service (ISDN Service Access)
- Alternating the Calling Method (Alternate Calling—Ring/Voice)
- Calling without Restrictions
- To Access Another Party Directly from Outside (Direct Inward System Access [DISA])
- Setting Your Telephone from Another Extension or through DISA (Remote Setting)
- Receiving Calls
- Answering Hands-free (Hands-free Answerback)
- Answering a Call Ringing at Another Telephone (Call Pickup)
- Answering a Call via an External Speaker (Trunk Answer From Any Station [TAFAS])
- Using the ANSWER/RELEASE Button
- Identifying Malicious Calling Parties (Malicious Call Identification [MCID])
- During a Conversation
- transferring to an outside party using the pbx service
- Holding a Call
- Talking to Two Parties Alternately (Call Splitting)
- Answering Call Waiting
- answering call waiting from the telephone company
- Multiple Party Conversation
- Mute
- Letting Other People Listen to the Conversation (Off-hook Monitor)
- Using the Headset (Headset Operation)
- Before Leaving Your Desk
- Showing a Message on the Caller's Telephone Display (Absent Message)
- Preventing Other People from Using Your Telephone (Extension Lock)
- Making/Answering an Announcement
- Answering/Denying a Paging Announcement
- Making an Announcement and Having a Multiple Party Conversation Broadcasting)(KX-TDA30/KX-TDA100/KX-TDA200 only)
- Setting the Telephone According to Your Needs
- Refusing Incoming Calls (Do Not Disturb [DND])
- Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/Whisper OHCA)
- Preventing Other People from Joining Your Conversation (Executive Busy Override Deny)
- Turning on the Background Music (BGM)
- Protecting Your Line against Notification Tones (Data Line Security)
- Checking the Time Service Status
- Setting the Parallelled Telephone to Ring (Parallelled Telephone)
- Using Your PS in Parallel with a Wired Telephone (Wireless XDP Parallel Mode)
- Clearing Features Set at Your Extension (Extension Feature Clear)
- Utilising the Call Centre
- monitoring the status of waiting calls
- Forwarding a Waiting Call (Manual Queue Redirection)
- Using User-supplied Equipment
- If a Host PBX is Connected
- If a Voice Processing System is Connected
- After Moving to a New Location in the Office
- Using a Display Proprietary Telephone
- to store the caller's information in personal speed dialling
- Using the Directories
- entering characters
- Accessing System Features (System Feature Access)
- Manager Operation
- Control Features
- Time Service Mode Control
- Restriction Level Control (Dial Tone Transfer)
- Turning on the External Background Music (BGM)
- Recording Outgoing Messages (OGM)
- Customising Your Phone & System
- Customising Your Phone (Personal Programming)
- Settings on the Programming Mode
- clearing features
- Customising the Buttons
- Manager Programming
- Customising Your System (System Programming)
- System Programming
- Appendix
- Troubleshooting
- Feature Number Table
- What is This Tone
- Revision History
- KX-TDA30 Version 1.1
- Index
- Table Of Contents
HYBRID IP-PBX KX-TDA100
Table of contents
- feature highlights
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Call Handling Features
- Incoming Call Features
- Direct In Line (DIL)
- Direct Inward Dialling (DID)/Direct Dialling In (DDI)
- Multiple Subscriber Number (MSN) Ringing Service
- Calling Line Identification (CLI) Distribution
- Intercept Routing
- Table Of Contents
- Intercept Routing—No Destination
- Internal Call Features
- Internal Call Block
- Incoming Call Indication Features
- Ring Tone Pattern Selection
- Call Waiting
- Receiving Group Features
- Incoming Call Distribution Group Features
- Table Of Contents
- Group Call Distribution
- Queuing Feature
- VIP Call
- Overflow Feature
- Log-in/Log-out
- Supervisory Feature
- Call Forwarding (FWD)/Do Not Disturb (DND) Features
- Call Forwarding (FWD)
- Do Not Disturb (DND)
- Answering Features
- Line Preference—Incoming
- Call Pickup
- Hands-free Answerback
- Making Call Features
- Automatic Extension Release
- Intercom Call
- Trunk Call Features
- Emergency Call
- Account Code Entry
- Dial Type Selection
- Reverse Circuit
- Pause Insertion
- Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
- Special Carrier Access Code
- Seizing a Line Features
- Line Preference—Outgoing
- Trunk Access
- Memory Dialling Features
- One-touch Dialling
- KX-T7710 One-touch Dialling (KX-TDA100/KX-TDA200 only)
- Last Number Redial
- Speed Dialling—Personal/System
- Quick Dialling
- Hot Line
- Busy Line/Busy Party Features
- Executive Busy Override
- Call Monitor
- Second Call Notification to Busy Extension
- Call Waiting Tone
- Off-hook Call Announcement (OHCA)
- Whisper OHCA
- Toll Restriction (TRS)/Call Barring (Barring) Features
- Budget Management
- Extension Lock
- Dial Tone Transfer
- Walking COS
- Verified Code Entry
- Automatic Route Selection (ARS) Features
- Conversation Features
- Off-hook Monitor
- Mute
- Headset Operation
- Data Line Security
- Flash/Recall/Terminate
- External Feature Access (EFA)
- Trunk Call Limitation
- Parallelled Telephone
- Calling Party Control (CPC) Signal Detection
- Transferring Features
- Holding Features
- Call Park
- Call Splitting
- Music on Hold
- Conference Features
- Conference
- Privacy Release
- Paging Features
- Broadcasting Features (KX-TDA30/KX-TDA100/KX-TDA200 only)
- Optional Device Features
- Door Open
- Trunk Answer From Any Station (TAFAS)
- Background Music (BGM)
- Outgoing Message (OGM)
- Direct Inward System Access (DISA)
- Caller ID Features
- Incoming Call Log
- Message Features
- Absent Message
- Proprietary Telephone (PT) Features
- Flexible Buttons
- LED Indication
- Display Information
- Integrated Services Digital Network (ISDN) Service Features
- Calling/Connected Line Identification Presentation (CLIP/COLP)
- Advice of Charge (AOC)
- Call Forwarding (CF)—by ISDN (P-MP)
- Call Forwarding (CF)—by ISDN (P-P)
- Call Hold (HOLD)—by ISDN
- Call Transfer (CT)—by ISDN
- Three-party Conference (3PTY)—by ISDN
- Malicious Call Identification (MCID)
- Completion of Calls to Busy Subscriber (CCBS)
- ISDN Extension
- ISDN Service Access by Keypad Protocol
- E1 Line Service Features (KX-TDA100/KX-TDA200 only)
- T1 Line Service Features (KX-TDA100/KX-TDA200 only)
- Voice Mail Features
- Voice Mail DTMF Integration
- Voice Mail DPT (Digital) Integration
- Portable Station (PS) Features
- PS Ring Group
- PS Directory
- PS Feature Buttons
- Wireless XDP Parallel Mode
- Administrative Information Output Features
- Charge Meter
- Extension Controlling Features
- Extension Feature Clear
- Walking Extension
- Timed Reminder
- Remote Extension Control by User
- Audible Tone Features
- Confirmation Tone
- Networking Features
- Virtual Private Network (VPN)
- QSIG Network
- Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name Identification Presentation (CNIP/CONP)—by QSIG
- Call Forwarding (CF)—by QSIG
- Call Transfer (CT)—by QSIG
- Completion of Calls to Busy Subscriber (CCBS)—by QSIG
- Voice over Internet Protocol (VoIP) Network
- Computer Telephony Integration (CTI) Features
- System Configuration and Administration Features
- System Configuration—Hardware
- System Configuration—Software
- Group
- Tenant Service
- Time Service
- Operator Features
- Manager Features
- System Data Control
- PT Programming
- Quick Setup
- Automatic Setup
- Flexible Numbering/Fixed Numbering
- Floating Extension
- Software Upgrading
- Fault Recovery/Diagnostics
- Power Failure Restart
- Local Alarm Information
- Programming Instructions
- Introduction
- PC Programming
- entering system programming mode
- entering characters
- Basic Programming
- Extension Name [004]
- Charge Margin [010]
- System Programming
- Idle Line Access (Local Access) [103]
- Verified Code COS Number [123]
- Time Programming
- Call Duration Count Starting Time for LCOT [208]
- TRS/Barring/ARS Programming
- ARS Leading Number [321]
- ARS Routing Plan Table (1–16) [331–346]
- Trunk Programming
- LCOT DTMF Minimum Duration [412]
- BRI Network Type [420]
- BRI TEI Mode [427]
- Host PBX Access Code [471]
- Pay Tone Signal Type [491] (KX-TDA100/KX-TDA200 only)
- COS Programming
- Executive Busy Override [505]
- Permission for Door Open Access [512]
- Extension Programming
- CLIP/COLP Number [606]
- Destination for Overflow Time Expiration [625]
- Queuing Time Table [630]
- User Groups of a Pickup Group [650]
- PS Registration [690]
- Resource/Interface Programming
- Doorphone Call Destination [720]
- Outgoing Message (OGM) Name [731]
- SMDR & Maintenance Programming
- SMDR Skip Perforation [803]
- Card Programming
- Appendix
- Capacity of System Resources
- Tones/Ring Tones
- List of Abbreviations
- Revision History
- KX-TDA30 Version 1.1
- Index
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
HYBRID IP-PBX KX-TDA100
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Overview
- Introduction
- Password Security
- Entering Characters
- PT Programming
- Programming Instructions
- Maximum Values
- Basic Programming
- Extension Number
- Absent Message
- Time Service Starting Time
- Verification Code
- Timer Programming
- Call Duration Count Starting Time for LCOT
- TRS Exception Code
- ARS Exception Number
- ARS Carrier Name
- LCOT CO Line Name
- LCOT Pause Time
- DID Number
- DISA Silence Detection
- COS Programming
- Executive Busy Override
- Permission for Door Open Access
- Extension Programming
- Extension Intercept Destination
- Incoming Call Distribution Group Floating Extension Number
- Destination When All Busy
- Maximum Number of Agents
- VM Group Floating Extension Number
- PS Termination
- Music Source Selection for BGM (with the KX-TDA50)/BGM2 (with the KX-TDA100/KX-TDA200/KX-TDA600)
- Doorphone Number Reference
- External Modem Control
- SMDR Outgoing Call Printing
- Slot Card Deletion
- Appendix
- Revision History
- Feature Programming References
- call transfer
- co line access
- door open
- emergency call
- floating extension
- icd group features
- idle extension hunting
- manager features
- paralleled telephone
- ps ring group
- special carrier access code
- tenant service
- verification code entry
- wireless xdp parallel mode
HYBRID IP-PBX KX-TDA100
Table of contents
- user manual
- feature highlights
- important information
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Operation
- Before Operating the Telephones
- your extension number
- when you use a panasonic proprietary telephone
- how to follow the steps
- connection example
- Making Calls
- calling an outside party
- using an account code (account code entry)
- Easy Dialling
- using numbers stored in the pbx (system speed dialling)
- using a preprogrammed number (quick dialling)
- Redial
- When the Dialled Line is Busy or There is No Answer
- Accessing the ISDN Service (ISDN Service Access)
- Alternating the Calling Method (Alternate Calling—Ring/Voice)
- Calling without Restrictions
- To Access Another Party Directly from Outside (Direct Inward System Access [DISA])
- Setting Your Telephone from Another Extension or through DISA (Remote Setting)
- Receiving Calls
- Answering Hands-free (Hands-free Answerback)
- Answering a Call Ringing at Another Telephone (Call Pickup)
- Answering a Call via an External Speaker (Trunk Answer From Any Station [TAFAS])
- Using the ANSWER/RELEASE Button
- Identifying Malicious Calling Parties (Malicious Call Identification [MCID])
- During a Conversation
- transferring to an outside party using the pbx service
- Holding a Call
- Talking to Two Parties Alternately (Call Splitting)
- Answering Call Waiting
- answering call waiting from the telephone company
- Multiple Party Conversation
- three-party conference [3pty]—by isdn
- Mute
- Letting Other People Listen to the Conversation (Off-hook Monitor)
- Using the Headset (Headset Operation)
- Before Leaving Your Desk
- Showing a Message on the Caller's Telephone Display (Absent Message)
- Preventing Other People from Using Your Telephone (Extension Lock)
- Making/Answering an Announcement
- Answering/Denying a Paging Announcement
- Making an Announcement and Having a Multiple Party Conversation (Broadcasting)
- Setting the Telephone According to Your Needs
- Refusing Incoming Calls (Do Not Disturb [DND])
- Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/Whisper OHCA)
- Displaying Your Telephone Number on the Called Party and Caller's Telephone (Calling Connected Line Identification Presentation [CLIP/COLP])
- Preventing Your Telephone Number Being Displayed on the Caller's Telephone (Connected Line Identification Restriction [COLR])
- Preventing Your Number Being Displayed on the Called Party's Telephone (Calling Line Identification Restriction [CLIR])
- Preventing Other People from Joining Your Conversation (Executive Busy Override Deny)
- Turning on the Background Music (BGM)
- Protecting Your Line against Notification Tones (Data Line Security)
- Checking the Time Service Status
- Setting the Parallelled Telephone to Ring (Parallelled Telephone)
- Using Your PS in Parallel with a Wired Telephone (Wireless XDP Parallel Mode)
- Clearing Features Set at Your Extension (Extension Feature Clear)
- Utilising the Call Centre
- Monitoring and Controlling the Call Status of an Incoming Call Distribution Group (Incoming Call Distribution Group Monitor)
- Forwarding a Waiting Call (Manual Queue Redirection)
- Using User-supplied Equipment
- If an External Relay is Connected
- If an External Sensor is Connected
- If a Host PBX is Connected
- If a Voice Processing System is Connected
- private mode
- recording a conversation
- After Moving to a New Location in the Office
- Using a Display Proprietary Telephone
- Using the Directories
- entering characters
- Accessing System Features (System Feature Access)
- Manager Operation
- Control Features
- Time Service Mode Control
- Restriction Level Control (Dial Tone Transfer)
- Turning on the External Background Music (BGM)
- Recording Outgoing Messages (OGM)
- Allowing Users to Seize an Unavailable Outside Line (Trunk Busy Out)
- Using the Telephones in a Hotel-type Environment (Hospitality Features)
- recording room information using a room extension
- Releasing Network Direct Station Selection (NDSS) Monitor
- Customising Your Phone & System
- Customising Your Phone (Personal Programming)
- Settings on the Programming Mode
- clearing features
- Customising the Buttons
- Manager Programming
- Customising Your System (System Programming)
- System Programming
- Appendix
- Troubleshooting
- Feature Number Table
- What is This Tone
- Revision History
- KX-TDA100/KX-TDA200 Version 2.0
- KX-TDA30 Version 1.1
- KX-TDA30 Version 2.0
- Index
- Table Of Contents
HYBRID IP-PBX KX-TDA100
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Overview
- Introduction
- Entering Characters
- PT Programming
- Programming Instructions
- Maximum Values
- Basic Programming
- Extension Number
- DSS Console Paired Telephone
- Time Service Starting Time
- Verification Code
- Timer Programming
- DISA Delayed Answer Time
- Special Carrier Access Code
- ARS Routing Plan Time Table
- ARS Removed Number of Digits for Carrier Access
- LCOT CO Line Number Reference
- LCOT Flash/Recall Time
- Trunk Group Intercept Destination (not applicable for MPR Software File Version 3.1000 or later)
- DISA Continuous Signal Detection
- CO Line Call Duration Limitation
- TRS Level for System Speed Dialing
- Extension Programming
- Extension Intercept Destination
- Incoming Call Distribution Group Name
- Queuing Call Capacity
- Extension User Groups of a Paging Group
- Idle Extension Hunting Type
- PS Termination
- Music Source Selection for BGM (with the KX-TDA50)/BGM2 (with the KX-TDA100/KX-TDA200/KX TDA600)
- Outgoing Message (OGM) Floating Extension Number
- RS-232C Parameter—Word Length
- SMDR Incoming Call Printing
- Slot Card Reset
- Appendix
- Feature Programming References
HYBRID IP-PBX KX-TDA100
Table of contents
- installation manual
- system components
- safety notices
- important safety instructions
- important information
- Table Of Contents
- Installation Manual
- Table Of Contents
- System Outline
- System Highlights
- Basic System Construction
- System Connection Diagram
- Optional Equipment
- Specifications
- Characteristics
- System Capacity
- power supply unit selection
- Installation
- Before Installation
- Installation of the PBX
- Names and Locations
- Opening/Closing the Front Cover
- Installing/Replacing the Power Supply Unit
- installing the power supply unit
- Frame Earth Connection
- Backup Battery Connection
- Installing/Removing the Optional Service Cards
- Types of Connectors
- Attaching a Ferrite Core
- Fastening Amphenol Connector
- Wall Mounting (KX-TDA200)
- Wall Mounting (KX-TDA100)
- Floor Standing (KX-TDA200 Only)
- Surge Protector Installation
- Information about the Main Processing Card
- led indications
- MEC Card (KX-TDA0105)
- RMT Card (KX-TDA0196)
- Information about the Trunk Cards
- pin assignments
- DID8 Card (KX-TDA0182)
- CID/PAY8 Card (KX-TDA0189)
- CID8 Card (KX-TDA0193)
- E&M8 Card (KX-TDA0184)
- T1 Card (KX-TDA0187)
- E1 Card (KX-TDA0188)
- switch settings
- BRI4 Card (KX-TDA0284) and BRI8 Card (KX-TDA0288)
- PRI30 Card (KX-TDA0290CE/KX-TDA0290CJ)
- PRI23 Card (KX-TDA0290)
- IP-GW4 Card (KX-TDA0480)
- IP-GW4E Card (KX-TDA0484)
- IP-GW16 Card (KX-TDA0490)
- Information about the Extension Cards
- dhlc8 card (kx-tda)
- dlc8 card (kx-tda)
- dlc16 card (kx-tda)
- slc8 card (kx-tda)
- ext-cid card (kx-tda)
- SLC16 Card (KX-TDA0174), MSLC16 Card (KX-TDA0175), and CSLC16 Card
- ip-ext16 card (kx-tda)
- information about the other cards
- Connection of Doorphones, Door Openers, External Sensors, and External
- eio4 card (kx-tda)
- echo16 card (kx-tda)
- msg4 card (kx-tda)
- esvm2 card (kx-tda0192) and esvm4 card (kx-tda)
- cti-link card (kx-tda)
- connection of extensions
- parallel connection of the extensions
- digital extra device port (digital xdp) connection
- first party call control cti connection
- connection of dect portable stations
- site planning
- wall mounting
- connection of 2.4 ghz portable stations
- site survey
- connection of dect 6.0 portable stations
- dip switch
- connection of peripherals
- Power Failure Connections
- Starting the PBX
- Guide for the Maintenance Console
- Overview
- PC Connection
- Installation of the Maintenance Console
- Troubleshooting
- Connection
- Operation
- Using the Reset Button
- Troubleshooting by Error Log
- Appendix
- Revision History
- PMPR Software File Version 2.0xxx
- PMPR Software File Version 3.0xxx
- PMPR Software File Version 3.2xxx
- PMPR Software File Version 5.0xxx
- Index
- Table Of Contents
HYBRID IP-PBX KX-TDA100
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Overview
- Introduction
- Password Security
- Entering Characters
- PT Programming
- Programming Instructions
- Maximum Values
- Basic Programming
- Extension Name
- Absent Message
- System Management Programming
- Idle Line Access (Local Access)
- Verification Code Name
- Main Processing (MPR) Software Version Reference
- Timer Programming
- Call Duration Count Starting Time for LCOT
- TRS/Barring/ARS Programming
- ARS Leading Number
- ARS Routing Plan Table (1–16) (KX-TDA30/KX-TDA100/KX-TDA200 only)
- ARS Carrier Access Code
- Trunk Programming
- LCOT DTMF Minimum Duration
- BRI Network Type
- BRI TEI Mode
- Trunk Group Intercept Destination (not applicable for MPR Software File Version 3.1000 or later)
- DISA Continuous Signal Detection
- COS Programming
- Executive Busy Override
- Permission for Door Open Access
- Extension Programming
- Extension Intercept Destination
- Incoming Call Distribution Group Name
- Queuing Call Capacity
- Extension User Groups of a Paging Group
- Idle Extension Hunting Group Member
- Personal Identification Number (PIN) for PS Registration
- Resource/Interface Programming
- Doorphone Call Destination
- DISA Security Mode
- SMDR & Maintenance Programming
- SMDR Skip Perforation
- Card Programming
- Appendix
- Revision History
- Feature Programming References
HYBRID IP-PBX KX-TDA100
Table of contents
- feature guide
- Networking features
- built-in small call center features
- paralleled telephone features
- Feature Guide
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- incoming call features
- direct in line (dil)
- direct inward dialing (did)
- calling line identification (cli) distribution
- intercept routing
- intercept routing—no destination
- internal call block
- incoming call indication features
- ring tone pattern selection
- call waiting
- receiving group features
- incoming call distribution (icd) group features
- group call distribution
- queuing feature
- vip call
- overflow feature
- icd group overflow
- supervisory feature
- call forwarding (fwd)/do not disturb (dnd)
- call forwarding (fwd)
- do not disturb (dnd)
- answering features
- call pickup
- hands-free answerback
- making call features
- intercom call
- emergency call
- dial type selection
- line preference—outgoing
- co line access
- Memory Dialing Features
- One-touch Dialing
- Last Number Redial
- Speed Dialing—Personal/System
- Quick Dialing
- Busy Line/Busy Party Features
- Call Monitor
- Second Call Notification to Busy Extension
- Call Waiting Tone
- Whisper OHCA
- Toll Restriction (TRS) Features
- Extension Lock
- Dial Tone Transfer
- Verified Code Entry
- Automatic Route Selection (ARS) Features
- Conversation Features
- Headset Operation
- Data Line Security
- External Feature Access (EFA)
- Paralleled Telephone
- Calling Party Control (CPC) Signal Detection
- Transferring Features
- Holding Features
- Call Park
- Call Splitting
- Music on Hold
- Conference Features
- Privacy Release
- Paging Features
- Optional Device Features
- Door Open
- Background Music (BGM)
- Direct Inward System Access (DISA)
- disa intercept routing—no dial
- External Sensor
- External Relay Control
- Caller ID Features
- Incoming Call Log
- Message Features
- Absent Message
- Proprietary Telephone (PT) Features
- Flexible Buttons
- LED Indication
- Display Information
- Integrated Services Digital Network (ISDN) Service Features
- Calling Line Identification Presentation (CLIP)
- T1 Line Service Features
- Voice Mail Features
- Voice Mail DPT (Digital) Integration
- live call screening (lcs)
- Voice Mail DTMF Integration
- Portable Station (PS) Features
- PS Ring Group
- Wireless XDP Parallel Mode
- PS Directory
- PS Feature Buttons
- Administrative Information Features
- Printing Message
- Hospitality Features
- Extension Controlling Features
- Extension Feature Clear
- Walking Extension
- Remote Extension Control by User
- Audible Tone Features
- Confirmation Tone
- Networking Features
- PBX Code Method (Access with PBX Code)
- Extension Number Method (Access without PBX Code)
- QSIG Network
- Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name Identification Presentation (CNIP/CONP)—by QSIG
- Network Direct Station Selection (NDSS) (KX-TDA0920 required)
- Voice over Internet Protocol (VoIP) Network
- IP Proprietary Telephone (IP-PT) Features
- Computer Telephony Integration (CTI) Features
- System Configuration and Administration Features
- System Configuration—Hardware
- System Configuration—Software
- Group
- Tenant Service
- Time Service
- Operator Features
- System Data Control
- PT Programming
- Quick Setup
- Automatic Time Adjustment
- Flexible Numbering/Fixed Numbering
- Floating Extension
- Software Upgrading
- Fault Recovery/Diagnostics
- Local Alarm Information
- Programming Instructions
- Introduction
- Entering Characters
- PC Programming
- buttons and functions
- entering system programming mode
- Basic Programming
- operator assignment
- System Management Programming
- manager password
- Time Programming
- TRS/ARS Programming
- trs denied code
- ars exception number
- CO Line Programming
- lcot pulse rate
- disa silence detection
- COS Programming
- Extension Programming
- class of service
- icd group delayed ringing
- destination when all busy
- maximum number of agents
- idle extension hunting type
- Resource/Interface Programming
- SMDR & Maintenance Programming
- external modem control
- Card Programming
- opb3 option card type reference
- KX-TDA Maintenance Console Operating Instructions
- Software Modes
- Standard Buttons
- File
- File—Close
- Connect
- Connect—LAN
- Connect—Disconnect
- Tool
- Tool—Import
- Tool—Export
- Utility
- Utility—File Transfer PC to PBX (SD Card)
- Utility—File Transfer PBX (SD Card) to PC
- Utility—SD Card File Delete
- Utility—Message File Transfer PBX to PC
- Utility—T1 Signalling Bit Monitor
- Utility—T1 Line Trace
- Utility—Digital Trunk Error Report
- Utility—IP Extension Statistical Information
- Utility—PS Information
- Utility—Timed Update
- Utility—System Reset—Reset by the Command
- Utility—Flash ROM ID Information
- Help
- Configuration [1]
- Slot [1-1] MPR Card Property
- Slot [1-1] Extension Card Property
- optional equipment
- Slot [1-1] CSI/F Card Property
- Slot [1-1] PRI Card Property
- Slot [1-1] T1 Card Property
- Slot [1-1] IP-GW Card Property
- subnet mask
- Slot [1-1] OPB
- port status
- Slot [1-1] OPB Card Command
- Slot [1-1] CTI-LINK Card Property
- Slot [1-1] Card Command
- Portable Station [1-2]
- Clock Priority [1-3]
- Option [1-4]
- dialing mode
- pause time
- LCO Port [1-5] Port Command
- network configuration
- network type
- PRI Port [1-6] Port Command
- T1 Port [1-7]
- T1 Port [1-7] Channel Command
- Extension Port [1-8]
- telephone type
- extension number
- Extension Port [1-8] Port Command
- CSI/F Port [1-9]
- CSI/F Port [1-9] Port Command
- IP-GW Port [1-10]
- IP-GW Port [1-10] Port Command
- IP-Extension Port [1-15]
- ringing tone
- System [2]
- PBX Operator [2-2]
- BGM / Music on Hold [2-3]
- Timers & Counters—CO / Extension [2-4-1]
- Timers & Counters—DISA/DPH/CONF/T. Reminder [2-4-2]
- disa co-to-co line call prolong time
- Timers & Counters—Miscellaneous [2-4-3]
- Time Service—Week Table [2-5-1]
- Time Service—Holiday Table [2-5-2]
- Numbering Plan—Extension [2-6-1]
- Numbering Plan—Feature [2-6-2]
- group paging
- group call pickup
- incoming call queue monitor
- Numbering Plan—Other PBX Extension [2-6-3]
- Numbering Plan—Quick Dialing [2-6-4]
- Numbering Plan—B/NA DND Call Feature [2-6-5]
- Class of Service—COS Settings [2-7-1]
- dnd override
- door unlock
- Class of Service—External Call Block [2-7-2]
- Ring Tone Patterns—Call from Others [2-8-3]
- System Options—Option 1 [2-9-1]
- System Options—Option 2 [2-9-2]
- System Options—Option 3 [2-9-3]
- System Options—Option 4 [2-9-4]
- CTI [2-10]
- Extension Caller ID [2-12]
- IP Extension Settings [2-13]
- Groups [3]
- Call Pickup Group [3-3]
- Paging Group [3-4]
- Incoming Call Distribution Group—Group Settings [3-5-1]
- automatic log-out
- Incoming Call Distribution Group—Member [3-5-2]
- Extension Hunting Group [3-6]
- VM(DPT) Group—System Setting [3-7-1]
- VM(DPT) Group—Unit Setting [3-7-2]
- PS Ring Group [3-9]
- Extension [4]
- display language
- paging deny
- Wired Extension—Extension Settings [4-1-1] CLIP Generate
- Wired Extension—FWD/DND [4-1-2]
- Wired Extension—Speed Dial [4-1-3]
- Wired Extension—Flexible Key [4-1-4]
- Wired Extension—Flexible Key [4-1-4] Flexible Key Data Copy
- Wired Extension—PF Key [4-1-5]
- Portable Station—Extension Settings [4-2-1]
- Portable Station—Extension Settings [4-2-1] CLIP Generate
- Portable Station—Flexible Key [4-2-3]
- Portable Station—Flexible Key [4-2-3] Flexible Key Data Copy
- Portable Station—NDSS Link Data - Send [4-2-4]
- DSS Console—Flexible Key [4-3-2]
- DSS Console—Flexible Key [4-3-2] Flexible Key Data Copy
- Optional Device [5]
- External Pager [5-2]
- DISA—System Setting [5-3-1]
- DISA—Message Setting [5-3-2]
- External Relay [5-4]
- External Sensor [5-5]
- Feature [6]
- Speed Dialing & Caller ID—Caller ID Modification [6-1-2]
- Speed Dialing & Caller ID—ISDN CLIP Modification [6-1-3]
- Emergency Dial [6-2]
- user name
- Second Dial Tone [6-4]
- Absent Message [6-5]
- Tenant [6-6]
- Dialing Plan [6-7]
- Dialing Plan [6-7] Auto Assign
- Hotel [6-8]
- TRS [7]
- Special Carrier [7-3]
- ARS [8]
- Leading Number [8-2]
- Routing Plan Time [8-3]
- Routing Plan Priority [8-4]
- Leading Number Exception [8-6]
- Private Network [9]
- Network BLF Data Transfer [9-2]
- Network Operator (VoIP) [9-3]
- CO & Incoming Call [10]
- DIL Table & Port Setting [10-2]
- DID Table [10-3]
- DID Table [10-3] Automatic Registration
- DID Table [10-3] Name Generate
- Miscellaneous [10-4]
- Maintenance [11]
- date format
- PT System Program [11-2]
- Miscellaneous [11-4]
- Password Setting [11-5]
- Appendix
- Capacity of System Resources
- call log
- Tones/Ring Tones
- Revision History
- Version 2.0
- Index
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
HYBRID IP-PBX KX-TDA100
Table of contents
- Table Of Contents
- Introduction
- Overview
- Using IP Proprietary Telephones on the Local and Remote Office LANs
- Network Management
- VLAN (Virtual LAN)
- Guidance for VoIP Installation
- VoIP Requirements
- Network Devices
- VoIP Requirements Checklist
- Installation
- Installing the IP-EXT16 Card in the Hybrid IP-PBX
- Connecting to the LAN
- Connecting the IP Proprietary Telephones
- Programming
- Programming the IP-EXT16 Card
- Programming the IP Proprietary Telephone
- Setting the VLAN Parameters
- Registering the IP-PT
- De-registering the IP-PT
- A Troubleshooting
- A1 Troubleshooting
- A1.2 Error Message
HYBRID IP-PBX KX-TDA100
Table of contents
- user manual
- important information
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Operation
- Before Operating the Telephones
- your extension number
- when you use a panasonic proprietary telephone
- Making Calls
- using an account code (account code entry)
- Easy Dialling
- using numbers stored in the pbx (system speed dialling)
- using a preprogrammed number (quick dialling)
- Redial
- When the Dialled Line is Busy or There is No Answer
- Accessing the ISDN Service (ISDN Service Access)
- Alternating the Calling Method (Alternate Calling—Ring/Voice)
- Calling without Restrictions
- To Access Another Party Directly from Outside (Direct Inward System Access [DISA])
- to call an outside party
- Setting Your Telephone from Another Extension or through DISA (Remote Setting)
- Receiving Calls
- Answering Hands-free (Hands-free Answerback)
- Answering a Call Ringing at Another Telephone (Call Pickup)
- Answering a Call via an External Speaker (Trunk Answer From Any Station [TAFAS])
- Using the ANSWER/RELEASE Button
- Identifying Malicious Calling Parties (Malicious Call Identification [MCID])
- During a Conversation
- transferring to an outside party using the pbx service
- Holding a Call
- Talking to Two Parties Alternately (Call Splitting)
- Answering Call Waiting
- Multiple Party Conversation
- three-party conference [3pty]—by isdn
- Mute
- Letting Other People Listen to the Conversation (Off-hook Monitor)
- Using the Headset (Headset Operation)
- Before Leaving Your Desk
- Using Voice Messaging (Built-in Simplified Voice Message [SVM])
- Showing a Message on the Caller's Telephone Display (Absent Message)
- Preventing Other People from Using Your Telephone (Extension Dial Lock)
- Making/Answering an Announcement
- Answering/Denying a Paging Announcement
- Setting the Telephone According to Your Needs
- Refusing Incoming Calls (Do Not Disturb [DND])
- Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/Whisper OHCA)
- Displaying Your Telephone Number on the Called Party and Caller's Telephone (Calling Connected Line Identification Presentation [CLIP/COLP])
- Preventing Your Telephone Number Being Displayed on the Caller's Telephone (Connected Line Identification Restriction [COLR])
- Preventing Your Number Being Displayed on the Called Party's Telephone (Calling Line Identification Restriction [CLIR])
- Preventing Other People from Joining Your Conversation (Executive Busy Override Deny)
- Turning on the Background Music (BGM)
- Protecting Your Line against Notification Tones (Data Line Security)
- Checking the Time Service Status
- Setting the Parallelled Telephone to Ring (Parallelled Telephone)
- Using Your PS in Parallel with a Wired Telephone (Wireless XDP Parallel Mode)
- Clearing Features Set at Your Extension (Extension Feature Clear)
- Utilising the Call Centre
- Monitoring and Controlling the Call Status of an Incoming Call Distribution Group (Incoming Call Distribution Group Monitor)
- Forwarding a Waiting Call (Manual Queue Redirection)
- Using User-supplied Equipment
- If an External Relay is Connected
- If an External Sensor is Connected
- If a Host PBX is Connected
- If a Voice Processing System is Connected
- After Moving to a New Location in the Office
- Using a Display Proprietary Telephone
- Using the Directories
- storing names and numbers
- entering characters
- Accessing System Features (System Feature Access)
- Manager Operation
- Control Features
- Time Service Mode Control
- Restriction Level Control (Dial Tone Transfer)
- Turning on the External Background Music (BGM)
- Recording Outgoing Messages (OGM)
- Using the Telephones in a Hotel-type Environment (Hospitality Features)
- Releasing Network Direct Station Selection (NDSS) Monitor
- Customising Your Phone & System
- Customising Your Phone (Personal Programming)
- Settings on the Programming Mode
- Customising the Buttons
- Manager Programming
- Customising Your System (System Programming)
- fixed buttons
- System Programming
- Appendix
- Troubleshooting
- Feature Number Table
- What is This Tone
- Revision History
- Index
- Table Of Contents
HYBRID IP-PBX KX-TDA100
Table of contents
- user manual
- feature highlights
- call record
- safety notices
- important safety instructions
- important information
- User Manual
- Table Of Contents
- Operation
- Before Operating the Telephones
- flexible buttons
- soft buttons
- connection example
- Making Calls
- making a call to a private network (tie line access)
- to call with one touch
- Easy Dialling
- to store a phone number
- Redial
- When the Dialled Line is Busy or There is No Answer
- Accessing the ISDN Service (ISDN Service Access)
- Calling without Restrictions
- To Access Another Party Directly from Outside (Direct Inward System Access DISA])
- Setting Your Telephone from Another Extension or through DISA (Remote Setting)
- Receiving Calls
- Answering Hands-free (Hands-free Answerback)
- Answering a Call Ringing at Another Telephone (Call Pickup)
- Answering a Call via an External Speaker (Trunk Answer From Any Station TAFAS])
- Using the ANSWER/RELEASE Button
- Identifying Malicious Calling Parties (Malicious Call Identification [MCID])
- During a Conversation
- Holding a Call
- Talking to Two Parties Alternately (Call Splitting)
- Answering Call Waiting
- Multiple Party Conversation
- Mute
- Letting Other People Listen to the Conversation (Off-hook Monitor)
- Using the Headset (Headset Operation)
- Using a PDN/SDN Button
- Before Leaving Your Desk
- Using Voice Messaging (Built-in Simplified Voice Message [SVM])
- Showing a Message on the Caller's Telephone Display (Absent Message)
- Preventing Other People from Using Your Telephone (Extension Dial Lock)
- Making/Answering an Announcement
- Answering/Denying a Paging Announcement
- Setting the Telephone According to Your Needs
- Refusing Incoming Calls (Do Not Disturb [DND])
- Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/Whisper OHCA)
- Displaying Your Telephone Number on the Called Party and Caller's Telephone (Calling Connected Line Identification Presentation [CLIP/COLP])
- Preventing Your Number Being Displayed on the Called Party's Telephone (Calling Line Identification Restriction [CLIR])
- Preventing Other People from Joining Your Conversation (Executive Busy Override Deny)
- Turning on the Background Music (BGM)
- Protecting Your Line against Notification Tones (Data Line Security)
- Checking the Time Service Status
- Setting the Parallelled Telephone to Ring (Parallelled Telephone)
- Using Your PS in Parallel with a Wired Telephone (Wireless XDP Parallel Mode)
- Clearing Features Set at Your Extension (Extension Feature Clear)
- Utilising the Call Centre
- Monitoring and Controlling the Call Status of an Incoming Call Distribution Group (Incoming Call Distribution Group Monitor)
- Forwarding a Waiting Call (Manual Queue Redirection)
- Using User-supplied Equipment
- If an External Relay is Connected
- If an External Sensor is Connected
- If a Host PBX is Connected
- If a Voice Processing System is Connected
- before operating
- Administrative Features
- Recording Information Using Preprogrammed Messages (Printing Message)
- After Moving to a New Location in the Office
- Using a Display Proprietary Telephone
- Using the Directories
- storing names and numbers
- Accessing System Features (System Feature Access)
- Manager Operation
- Control Features
- Time Service Mode Control
- Restriction Level Control (Dial Tone Transfer)
- Turning on the External Background Music (BGM)
- Recording Outgoing Messages (OGM)
- Allowing Users to Seize an Unavailable Outside Line (Trunk Busy Out)
- Releasing Network Direct Station Selection (NDSS) Monitor
- customising your phone & system
- Customising Your Phone (Personal Programming)
- Settings on the Programming Mode
- clearing features
- Customising the Buttons
- Manager Programming
- Customising Your System (System Programming)
- fixed buttons
- System Programming
- Appendix
- Troubleshooting
- Feature Number Table
- What is This Tone
- Revision History
- KX-TDA600 PLMPR Software File Version 5.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 1.1xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 2.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.2xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 5.0xxx
- KX-TDA30 PSMPR Software File Version 1.1xxx
- KX-TDA30 PSMPR Software File Version 2.0xxx
- KX-TDA30 PSMPR Software File Version 2.2xxx
- KX-TDA30 PSMPR Software File Version 3.0xxx
- KX-TDA30 PSMPR Software File Version 4.0xxx
- KX-TDA30 PSMPR Software File Version 5.0xxx
- Index
HYBRID IP-PBX KX-TDA100
Table of contents
- installation manual
- system components
- important safety instructions
- password security
- about the other manuals
- Table Of Contents
- Installation Manual
- System Outline
- System Highlights
- voice mail features
- Basic System Construction
- System Connection Diagram
- Options
- Specifications
- Characteristics
- System Capacity
- cards mounted on other optional service cards
- mec card calculation
- power supply unit selection
- Installation
- Before Installation
- Installation of the Hybrid IP-PBX
- Names and Locations
- Opening/Closing the Front Cover
- closing the front cover
- Installing/Replacing the Power Supply Unit
- replacing the power supply unit
- Frame Ground Connection
- Installing/Removing the Optional Service Cards
- covering the blank slots
- handling of the cables
- Types of Connectors
- Attaching a Ferrite Core
- Fastening Amphenol Type Connector
- amphenol connector pin assignment chart
- Wall Mounting (KX-TDA200)
- Wall Mounting (KX-TDA100)
- Floor Standing (KX-TDA200 Only)
- Surge Protector Installation
- Installation of the Main Processing Card
- led indications
- MEC Card
- RMT Card
- Installation of the CO Line Cards
- CID8 Card
- T1 Card
- PRI23 Card
- IP-GW4 Card
- IP-GW4E Card
- IP-GW16 Card
- Installation of the Extension Cards
- DHLC8 Card
- DLC8 Card
- DLC16 Card
- SLC8 Card
- EXT-CID Card
- SLC16 and MSLC16 Cards
- IP-EXT16 Card
- Installation of the Other Cards
- DPH4 Card
- EIO4 Card
- connection diagram for external sensor
- ECHO16 Card
- MSG4 Card
- CTI-LINK Card
- Connection of Extensions
- Parallel Connection of the Extensions
- Digital EXtra Device Port (Digital XDP) Connection
- First Party Call Control CTI Connection
- Connection of 2.4 GHz Portable Stations
- Procedure Overview
- Site Planning
- Before Site Survey
- Site Survey
- After Site Survey
- Connecting a Cell Station to the Hybrid IP-PBX
- using a dhlc/dlc card
- Wall Mounting
- Connection of Doorphones, Door Openers, External Sensors, and External Relays
- Connection of Peripherals
- Power Failure Connections
- Starting the Hybrid IP-PBX
- confirming the co line connection
- Guide for the KX-TDA Maintenance Console
- Overview
- Connection
- Installation of the KX-TDA Maintenance Console
- Troubleshooting
- Operation
- Using the Reset Button
- Troubleshooting by Error Log
- Appendix
- Revision History
- Version 2.0
- Index
- Table Of Contents
- Table Of Contents
HYBRID IP-PBX KX-TDA100
Table of contents
- operating manual
- feature highlights
- safety notices
- important safety instructions
- important information
- Operating Manual
- Table Of Contents
- Operation
- Before Operating the Telephones
- your extension number
- icon descriptions
- when you use a panasonic proprietary telephone
- customized buttons
- connection example
- Basic Operations
- Answering Calls
- Telephone Features and Operation
- Account Code Entry
- Automatic Callback Busy (Camp-on)
- BGM (Background Music)
- Call Hold
- call hold retrieve
- Call Monitor
- call park retrieve
- Call Pickup
- Call Splitting
- Call Transfer
- transferring to an extension in the pbx
- CALL WAITING FEATURES
- call waiting (bss [busy station signaling)
- Call Waiting Tone
- Conference
- Conference, Unattended
- Data Line Security
- DISA (Direct Inward System Access)
- to call an extension
- to call an outside party
- DND (Do Not Disturb)
- dnd override
- switching fwd/dnd status using fixed fwd/dnd button
- Door Open
- Doorphone Call
- EFA (External Feature Access)
- Extension Dial Lock
- Extension Feature Clear
- Extension PIN (Personal Identification Number)
- External Relay
- External Sensor
- fwd/dnd settings using fixed fwd/dnd button
- Hands-free Answerback
- Hands-free Operation
- HOSPITALITY FEATURES
- ICD GROUP FEATURES
- icd group features—call log history for icd group
- icd group features—incoming call queue monitor
- icd group features—log-in/log-out
- icd group features—manual queue redirection
- Message Waiting
- Mute
- OHCA (Off-hook Call Announcement)
- Paging
- Paralleled Telephone
- PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension KX-TDA100/KX-TDA200/KX-TDA600 only)
- sdn direct dial
- Printing Message
- Privacy Release
- private network features—tie line access
- Quick Dialing
- Redial, Last Number
- Speed Dialing, Personal
- Speed Dialing, System
- TAFAS (Trunk Answer From Any Station)
- Timed Reminder
- Time Service
- Verification Code Entry
- voice mail features—lcs (live call screening)
- voice mail features—two-way record
- voice mail features—voice mail integration
- Wake-up Call
- Walking COS
- Walking Extension
- Whisper OHCA
- Wireless XDP Parallel Mode
- Call Log, Outgoing
- Directories
- storing new names and numbers
- System Feature Access
- Manager Operation
- Manager Service Features
- OGM (Outgoing Messages)
- private network features—ndss (network direct station selection) monitor release
- Remote Extension Dial Lock
- customizing your phone & system
- Personal Programming
- display lock
- Programming Feature Clear
- Customizing the Buttons
- Manager Programming
- System Programming
- Appendix
- Troubleshooting
- Feature Number Table
- Tone
- Revision History
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 5.0xxx
- KX-TDA50 PSMPR Software File Version 3.0xxx
- KX-TDA50 PSMPR Software File Version 5.0xxx
- Index
- Table Of Contents
- Table Of Contents
- Table Of Contents
HYBRID IP-PBX KX-TDA100
Table of contents
- feature manual
- Feature Manual
- feature highlights
- hospitality features
- list of abbreviations
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Absent Message
- Account Code Entry
- ARS (Automatic Route Selection)
- itemized billing code
- Automatic Callback Busy (Camp-on)
- Automatic Extension Release
- Automatic Time Adjustment
- BGM (Background Music)
- Caller ID
- Call Hold
- Call Log, Incoming
- display lock
- Call Monitor
- Call Park
- Call Pickup
- Call Splitting
- Call Transfer
- CALL WAITING FEATURES
- Call Waiting Tone
- CELLULAR PHONE FEATURES
- CLIP (Calling Line Identification Presentation)
- CO Line Access
- CO Line Call Limitation
- Conference
- Confirmation Tone
- Consultation Hold
- COS (Class of Service)
- CPC (Calling Party Control) Signal Detection
- Data Line Security
- Dial Tone
- Dial Tone Transfer
- DID (Direct Inward Dialing)
- DIL (Direct In Line)
- DISA (Direct Inward System Access)
- disa intercept routing—no dial
- disa intercept routing—busy
- disa intercept routing—dnd
- Display Information
- DND (Do Not Disturb)
- Door Open
- Doorphone Call
- EFA (External Feature Access)
- Emergency Call
- Extension Dial Lock
- Extension Feature Clear
- Extension PIN (Personal Identification Number)
- Extension Port Configuration
- External Relay
- External Sensor
- Fixed Buttons
- Flash/Recall/Terminate
- Flexible Buttons
- Flexible Numbering/Fixed Numbering
- Floating Extension
- FWD (Call Forwarding)
- FWD/DND Button, Group FWD Button
- GROUP FEATURES
- paging group
- Hands-free Answerback
- Hands-free Operation
- HOSPITALITY FEATURES
- Hot Line
- ICD GROUP FEATURES
- icd group features—group call distribution
- icd group features—log-in/log-out
- icd group features—outside destinations
- icd group features—overflow
- icd group features—queuing
- icd group features—supervisory
- icd group features—vip call
- Idle Extension Hunting
- INCOMING CALL FEATURES
- Intercept Routing
- intercept routing—no destination
- Intercom Call
- Internal Call Block
- IP-PT (IP Proprietary Telephone)
- ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
- features and configurations—l
- LED Indication
- line preference—incoming
- line preference—outgoing
- Local Alarm Information
- features and configurations—m
- Manager Features
- MEMORY DIALING FEATURES
- Message Waiting
- Music on Hold
- Mute
- features and configurations—o
- Off-hook Monitor
- OHCA (Off-hook Call Announcement)
- Operator Features
- features and configurations—p
- Paging
- Paralleled Telephone
- Password Security
- Pause Insertion
- PC Console/PC Phone
- PC Programming
- PDN (Primary Directory Number)/SDN (Secondary Directory Number Extension
- Power Failure Restart
- Predialing
- Privacy Release
- private network features—centralized voice mail
- multiple vpss
- private network features—network icd group
- private network features—qsig
- private network features—qsig—cf (call forwarding)
- Presentation) and CNIP/CONP (Calling/Connected Name Identification Presentation)
- private network features—qsig—ct (call transfer)
- PS Connection
- PS Directory
- PS Feature Buttons
- PT Programming
- features and configurations—q
- Quick Dialing
- Quick Setup
- features and configurations—r
- Redial, Last Number
- Ring Tone Pattern Selection
- Room Status Control
- features and configurations—s
- SMDR (Station Message Detail Recording)
- Special Carrier Access Code
- Speed Dialing, System
- SVM (Simplified Voice Message)
- message notification
- features and configurations—t
- T1 Line Service
- TAFAS (Trunk Answer From Any Station)
- Tenant Service
- Timed Reminder
- Time Service
- TRS (Toll Restriction)
- denied code tables
- exception code tables
- features and configurations—u
- Upgrading the Software
- features and configurations—v
- Verification Code Entry
- Virtual PS
- Voice Mail (VM) Group
- Voice Mail DPT (Digital) Integration
- live call screening (lcs)
- Voice Mail DTMF Integration
- features and configurations—w
- Walking COS
- Walking Extension
- Whisper OHCA
- Appendix
- Capacity of System Resources
- Exclusive Features Table
- Tones/Ring Tones
- Revision History
- KX-TDA100/KX-TDA200 PMPR Software File Version 2.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.2xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 5.0xxx
- KX-TDA50 PSMPR Software File Version 2.0xxx
- KX-TDA50 PSMPR Software File Version 3.0xxx
- KX-TDA50 PSMPR Software File Version 4.0xxx
- KX-TDA50 PSMPR Software File Version 5.0xxx
- Index
- Table Of Contents
- Table Of Contents
- Table Of Contents
HYBRID IP-PBX KX-TDA100
Table of contents
- user manual
- important notice
- important information
- Table Of Contents
- User Manual
- Table Of Contents
- Operation
- Before Operating the Telephones
- when you use a panasonic proprietary telephone
- Making Calls
- making a call to a private network (tie line access)
- to call with one touch
- Easy Dialling
- Redial
- When the Dialled Line is Busy or There is No Answer
- Accessing the ISDN Service (ISDN Service Access)
- Calling without Restrictions
- To Access Another Party Directly from Outside (Direct Inward System Access [DISA])
- Setting Your Telephone from Another Extension or through DISA (Remote Setting)
- Receiving Calls
- Answering Hands-free (Hands-free Answerback)
- Answering a Call Ringing at Another Telephone (Call Pickup)
- Answering a Call via an External Speaker (Trunk Answer From Any Station [TAFAS])
- Using the ANSWER/RELEASE Button
- Identifying Malicious Calling Parties (Malicious Call Identification [MCID])
- During a Conversation
- Holding a Call
- Talking to Two Parties Alternately (Call Splitting)
- Answering Call Waiting
- Multiple Party Conversation
- Mute
- Letting Other People Listen to the Conversation (Off-hook Monitor)
- Using the Headset (Headset Operation)
- Using a PDN/SDN Button
- Before Leaving Your Desk
- Using Voice Messaging (Built-in Simplified Voice Message [SVM])
- Showing a Message on the Caller's Telephone Display (Absent Message)
- Preventing Other People from Using Your Telephone (Extension Dial Lock)
- Making/Answering an Announcement
- Answering/Denying a Paging Announcement
- Making an Announcement and Having a Multiple Party Conversation (Broadcasting)
- Setting the Telephone According to Your Needs
- Refusing Incoming Calls (Do Not Disturb [DND])
- Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/Whisper OHCA)
- Displaying Your Telephone Number on the Called Party and Caller's Telephone (Calling Connected Line Identification Presentation [CLIP/COLP])
- Preventing Your Number Being Displayed on the Called Party's Telephone (Calling Line Identification Restriction [CLIR])
- Preventing Other People from Joining Your Conversation (Executive Busy Override Deny)
- Turning on the Background Music (BGM)
- Protecting Your Line against Notification Tones (Data Line Security)
- Checking the Time Service Status
- Setting the Parallelled Telephone to Ring (Parallelled Telephone)
- Using Your PS in Parallel with a Wired Telephone (Wireless XDP Parallel Mode)
- Clearing Features Set at Your Extension (Extension Feature Clear)
- Utilising the Call Centre
- Monitoring and Controlling the Call Status of an Incoming Call Distribution Group (Incoming Call Distribution Group Monitor)
- Forwarding a Waiting Call (Manual Queue Redirection)
- Using User-supplied Equipment
- If an External Relay is Connected
- If an External Sensor is Connected
- If a Host PBX is Connected
- If a Voice Processing System is Connected
- Administrative Features
- Recording Information Using Preprogrammed Messages (Printing Message)
- After Moving to a New Location in the Office
- Using a Display Proprietary Telephone
- Using the Directories
- entering characters
- Accessing System Features (System Feature Access)
- Manager Operation
- Control Features
- Time Service Mode Control
- Restriction Level Control (Dial Tone Transfer)
- Turning on the External Background Music (BGM)
- Recording Outgoing Messages (OGM)
- Allowing Users to Seize an Unavailable Outside Line (Trunk Busy Out)
- Releasing Network Direct Station Selection (NDSS) Monitor
- customising your phone & system
- Customising Your Phone (Personal Programming)
- Settings on the Programming Mode
- Customising the Buttons
- Manager Programming
- Customising Your System (System Programming)
- fixed buttons
- System Programming
- Appendix
- Troubleshooting
- Feature Number Table
- What is This Tone
- Revision History
- KX-TDA600 PLMPR Software File Version 5.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 1.1xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 2.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.2xxx
- KX-TDA30 PSMPR Software File Version 1.1xxx
- KX-TDA30 PSMPR Software File Version 2.0xxx
- KX-TDA30 PSMPR Software File Version 2.2xxx
- KX-TDA30 PSMPR Software File Version 3.0xxx
- KX-TDA30 PSMPR Software File Version 4.0xxx
- Index
HYBRID IP-PBX KX-TDA100
Table of contents
- safety notices
- Table of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Overview
- Introduction
- Entering Characters
- PC Programming
- Password Security
- Introduction of Maintenance Console
- Access Levels
- Software Interface
- Card Status
- Display Options
- Extension Number Setting
- Start Menu
- Start Menu—Open
- Start Menu—Connect—RS-232C
- Start Menu—Connect—USB
- Start Menu—Connect—LAN
- Start Menu—Connect—Modem
- Start Menu—Connect—ISDN Remote
- Start Menu—Connect—Profile Setup
- File
- File—Save
- File—Save As
- File—Exit
- Disconnect
- Tool
- Tool—BRI Automatic Configuration
- Tool—NDSS Link Data Clear
- Tool—DXDP All OUS
- Tool—Simplified Voice Message—Delete All Recording
- Tool—Simplified Voice Message—Check Current Usage
- Tool—Call Pickup for My Group
- Tool—Extension List View
- Tool—Import
- Tool—Export
- Tool—Screen Customize—User Level/Administrator Level
- Utility
- Utility—File Transfer PC to PBX (SD Card)
- Utility—File Transfer PBX (SD Card) to PC
- Utility—SD Card File View and Load
- Utility—SD Card File Delete
- Utility—Message File Transfer PC to PBX
- Utility—Message File Transfer PBX to PC
- Utility—Error Log
- Utility—T1/E1 Signalling Bit Monitor (for KX-TDA100/KX-TDA200/KX-TDA600) / E1 Signalling Bit Monitor (for KX-TDA30)
- Utility—T1/E1 Line Trace (for KX-TDA100/KX-TDA200/KX-TDA600) / E1 Line Trace (for KX-TDA30)
- Utility—ISDN/QSIG Protocol Trace
- Utility—Digital Trunk Error Report
- Utility—IP Extension Statistical Information
- Utility—CS Information
- Utility—PS Information
- Utility—Timed Update
- Utility—System Reset—Reset by the Command
- Utility—Flash ROM ID Information
- Help
- Configuration
- Slot
- Slot—Summary
- Slot—Card Property - MPR
- Slot—Card Property - Extension Type
- Slot—Port Property - Extension Port
- extension number
- extension name
- parallel telephone ringing
- Slot—Port Property - Extension Port—Connection Command
- Slot—Port Property - Extension Port—Port Type View
- Slot—Port Property - CSI/F Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - CSI/F Port—Connection Command (KX-TDA100 KX-TDA200/KX-TDA600 only)
- Slot—Card Property - LCO type
- Slot—Port Property - LCO Port
- busy out status
- Slot—Port Property - LCO Port—Connection Command
- Slot—Card Property - BRI type/PRI type
- Slot—Port Property - BRI Port
- Slot—Port Property - BRI Port—Connection Command
- Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- network configuration
- Slot—Port Property - PRI Port—Connection Command (KX-TDA100 KX-TDA200/KX-TDA600 only)
- Slot—Card Property - T1 type (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - T1 Port—Connection Command (KX-TDA100/KX-TDA200 KX-TDA600 only)
- Slot—Card Property - E1 type
- Slot—Card Property - E1 type—Line Signal Setting
- Slot—Card Property - E1 type—MFC-R2 Setting 1
- Slot—Card Property - E1 type—MFC-R2 Setting 2
- Slot—Port Property - E1 Port
- Slot—Port Property - E1 Port—Connection Command
- Slot—Card Property - EM type (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Card Property - DID type
- Slot—Port Property - DID Port
- Slot—Port Property - DID Port—Connection Command
- Slot—Card Property - IP Gateway
- Slot—Port Property - IP-GW Port
- Slot—Port Property - IP-GW Port—Connection Command
- Slot—Card Property - IP Extension
- Slot—Card Property - IP Extension—Common Settings
- Slot—Port Property - IP-Extension Port
- Slot—Card Property - SIP Gateway (KX-TDA30 only)
- Slot—SIP-GW Port Property (KX-TDA30 only)
- Slot—OPB3 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
- port status
- device type
- Slot—OPB3 Card Property—Card Command (KX-TDA100/KX-TDA200 KX-TDA600 only)
- Slot—OPB3 Option Card Setup (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Card Property - CTILINK (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Card Property - DPH type (KX-TDA30 only)
- Slot—Card Property - DPH type—Connection Command (KX-TDA30 only)
- Slot—Card Property - ESVM Type (KX-TDA30 only)
- Portable Station
- Option
- Clock Priority
- System
- Date & Time/Daylight Saving
- Date & Time/Daylight Saving—Date & Time Setting
- Operator & BGM
- Timers & Counters
- dial—extension first digit
- tone length—reorder tone for pt handset
- svm—recording time
- broadcasting—ring duration
- Week Table
- Week Table—Time Setting
- Holiday Table
- Numbering Plan—Main
- trunk group access
- doorphone call
- group paging
- ogm record / clear / playback
- directed call pickup
- group paging answer
- account code entry
- door open
- walking extension
- manual call waiting for extension call
- incoming call queue monitor
- printing message
- extension feature clear
- simplified voice message access
- other pbx extension
- Numbering Plan—Quick Dial
- Numbering Plan—B/NA DND Call Feature
- call monitor
- automatic callback busy
- Table Of Contents
- Class of Service—COS Settings
- transfer to co
- account code mode
- dnd override
- ohca / whisper ohca
- executive busy override deny
- programming mode level
- door unlock
- Class of Service—External Call Block
- Class of Service—Internal Call Block
- Ring Tone Patterns—Call from CO
- Ring Tone Patterns—Call from Doorphone
- Ring Tone Patterns—Call from Others
- System Options
- pt fwd / dnd—paging to dnd extension
- confirmation tone—tone 2 : paged / automatic answer
- whisper ohca—for slt / apt / kx-t72xx
- call waiting—automatic call waiting for extension call
- isdn option—fwd from isdn to isdn
- Extension CID Settings
- Audio Gain—Paging/MOH
- paging—paging level from pt speaker
- Audio Gain—Card
- Group
- Trunk Group—TRG Settings
- line hunting order
- simplified voice message tone detection—silence
- host pbx access code
- Trunk Group—Local Access Priority
- Caller ID Modification
- Dialling Plan
- Dialling Plan—Auto Assign
- Trunk Group—Charge Rate
- User Group
- Call Pickup Group
- Call Pickup Group—All Setting
- Paging Group
- Paging Group—All Setting
- Paging Group—External Pager
- Incoming Call Distribution Group—Group Settings
- overflow queuing busy
- overflow no answer
- queuing time table
- extension no answer redirection time
- Incoming Call Distribution Group—Group Settings—Member List
- delayed ring
- Incoming Call Distribution Group—Queuing Time Table
- Incoming Call Distribution Group—Miscellaneous
- Extension Hunting Group
- Extension Hunting Group—Member List
- VM(DPT) Group—System Settings
- VM(DPT) Group—Unit Settings
- VM(DPT) Group—Unit Settings—Member List
- VM(DTMF) Group—System Settings
- VM(DTMF) Group—Group Settings
- VM(DTMF) Group—Group Settings—Member List
- PS Ring Group
- PS Ring Group—Member List
- Broadcasting Group
- Broadcasting Group—Member List
- Extension
- Wired Extension—Extension Settings
- wireless xdp
- absent message
- display lock / svm lock
- paging deny
- Wired Extension—Extension Settings—CLIP Generate
- Wired Extension—FWD/DND
- Wired Extension—Speed Dial
- Wired Extension—Flexible Button
- Wired Extension—Flexible Button—Flexible button data copy
- Wired Extension—PF Button
- Wired Extension—NDSS Link Data - Send
- Wired Extension—Simplified Voice Message
- Portable Station—Extension Settings
- svm lock
- Portable Station—Extension Settings—CLIP Generate
- Portable Station—FWD/DND
- Portable Station—Flexible Button
- Portable Station—Flexible Button—Flexible button data copy
- Portable Station—NDSS Link Data - Send
- Portable Station—Simplified Voice Message
- DSS Console
- DSS Console—DSS key data copy
- Optional Device
- Doorphone
- External Pager
- Voice Message—DISA System
- disa intercept—intercept when all disa ports are busy
- Voice Message—DISA Message
- Voice Message—SVM
- remote access
- External Relay
- External Sensor
- Feature
- System Speed Dial
- Hotel & Charge
- checkout billing—lcd for "telephone
- margin & tax—margin rate for "telephone
- charge options—action at charge limit
- Verification Code
- itemised billing code for ars
- budget management
- Second Dial Tone
- Absent Message
- Tenant
- ars mode
- Denied Code
- Exception Code
- Special Carrier
- Emergency Dial
- Miscellaneous
- System Setting
- Leading Number
- Routing Plan Time
- Routing Plan Time—Time Setting
- Routing Plan Priority
- Carrier
- Leading Number Exception
- Authorisation Code for TRG
- Private Network
- TIE Table
- trunk group
- Network Data Transmission
- Network Operator (VoIP)
- NDSS Key Table
- CO & Incoming Call
- CO Line Settings
- trunk group number
- DIL Table & Port Settings
- DDI / DID Table
- DDI/DID Table—Automatic Registration
- DDI/DID Table—Name Generate
- MSN Table
- intercept—intercept routing for extension call
- Maintenance
- Main
- PT Programming Access
- Power Failure Transfer (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Appendix
- 14.1 Revision History
- Revision History
- KX-TDA600 PLMPR Software File Version 5.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.2xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 5.0xxx
- KX-TDA30 PSMPR Software File Version 4.0xxx
- KX-TDA30 PSMPR Software File Version 5.0xxx
- 14.2 Feature Programming References
- Feature Programming References
- Table Of Contents
- call hold
- call park
- call pickup
- call waiting
- confirmation tone
- dial tone
- display information
- emergency call
- extension dial lock
- external sensor
- flexible buttons
- headset operation
- intercept routing
- last number redial
- local alarm information
- manager features
- music on hold
- operator features
- Table Of Contents
- pause insertion
- power failure transfer
- privacy release
- ring tone pattern selection
- t1 line service
- time service
- verification code entry
- voice mail dtmf integration
- whisper ohca
HYBRID IP-PBX KX-TDA100
Table of contents
- Table Of Contents
- Before Installation
- System Connection Diagram
- Unpacking
- Installation
- Opening/Closing the Front Cover
- Inserting the SD Memory Card to the MPR Card
- Installing the Trunk Cards
- Installing the Extension Cards (DLC8/DLC16/DHLC8/MSLC16/SLC8/SLC16)
- Frame Earth Connection
- Starting the Hybrid IP-PBX
- Customising the Hybrid IP-PBX
- Connecting the PC
- Programming the Hybrid IP-PBX
- Confirming the Connection
- Making Calls
HYBRID IP-PBX KX-TDA100
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Overview
- Introduction
- entering characters
- PC Programming
- installing the maintenance console
- Password Security
- KX-TDA Maintenance Console Operating Instructions
- starting maintenance console and software modes
- access levels
- software interface
- Card Status
- display options
- File
- file—save as
- File—Exit
- Connect
- Connect—LAN
- Connect—Modem
- connect—profile setup
- connect—profile editor
- Connect—Disconnect
- tool—sd memory backup
- tool—extension list view
- tool—programmer code change
- tool—screen customize—user level/administrator level
- Utility
- utility—file transfer pc to pbx (sd card)
- utility—file transfer pbx (sd card) to pc
- utility—sd card file view and load
- utility—sd card file delete
- utility—error log
- Utility—T1 Signaling Bit Monitor (KX-TDA100/KX-TDA200/KX-TDA600 only)
- utility—isdn/qsig protocol trace
- Utility—Digital Trunk Error Report (KX-TDA100/KX-TDA200/KX-TDA600 only)
- utility—ip extension statistical information
- utility—ps information
- Utility—Timed Update (KX-TDA100/KX-TDA200/KX-TDA600 only)
- utility—system reset—reset by the command
- utility—flash rom id information
- frequently asked questions (faq)
- Configuration
- Slot—Summary
- Slot—MPR Card Property
- Slot—Extension Card Property
- Slot—Extension Port
- extension number
- extension name
- Slot—Extension Port—Port Command
- Slot—Extension Port—Port Type View
- Slot—CSI/F Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—CSI/F Port—Port Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—LCO Card Property
- Slot—LCO Port
- Slot—LCO Port—Port Command
- Slot—PRI Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- network configuration
- Slot—PRI Port—Port Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—T1 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—T1 Port—Channel Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—IP-GW Card Property
- Slot—IP-GW Port
- Slot—IP-GW Port—Port Command
- Slot—IP-Extension Card Property
- Slot—IP-Extension Card Property—Common Settings
- Slot—IP-Extension Port
- Slot—OPB (KX-TDA100/KX-TDA200/KX-TDA600 only)
- port status
- Slot—OPB Card Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—OPB3 Option Card Setup (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—CTI-LINK Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
- subnet mask
- Slot—DPH Card Property (KX-TDA50 only)
- Slot—DPH Port Command (KX-TDA50 only)
- Portable Station
- Option
- Clock Priority (KX-TDA100/KX-TDA200/KX-TDA600)
- System
- Date & Time/Daylight Saving—Date & Time Setting
- Operator & BGM
- Timers & Counters
- Week Table
- Holiday Table
- Numbering Plan—Main
- trunk group access
- doorphone call
- group paging
- single co line access
- directed call pickup
- group paging answer
- automatic callback busy cancel
- account code entry
- door open
- walking extension
- incoming call queue monitor
- extension feature clear
- Numbering Plan—Quick Dial
- Numbering Plan—B/NA DND Call Feature
- executive busy override
- call monitor
- Class of Service—COS Settings
- trs level for system speed dialing
- account code mode
- dnd override
- executive busy override deny
- programming mode level
- door unlock
- Class of Service—External Call Block
- Class of Service—Internal Call Block
- Ring Tone Patterns—Call from CO
- Ring Tone Patterns—Call from Others
- System Options
- Extension CID Settings
- Audio Gain—Paging/MOH
- Audio Gain—Card
- Group
- line hunting order
- host pbx access code
- Trunk Group—Local Access Priority
- Call Pickup Group
- Call Pickup Group—All Setting
- Paging Group
- Paging Group—All Setting
- Paging Group—External Pager
- Incoming Call Distribution Group—Group Settings
- overflow queuing busy
- overflow no answer
- queuing time table
- extension no answer redirection time
- Incoming Call Distribution Group—Queuing Time Table
- Incoming Call Distribution Group—Miscellaneous
- Incoming Call Distribution Group—Member
- delayed ring
- Extension Hunting Group
- Extension Hunting Group—Member List
- VM(DPT) Group—System Settings
- VM(DPT) Group—Unit Settings
- VM(DPT) Group—Unit Settings—Member List
- VM(DTMF) Group—System Settings
- VM(DTMF) Group—Group Settings
- VM(DTMF) Group—Group Settings—Member List
- PS Ring Group
- PS Ring Group—Member List
- Extension
- absent message
- paging deny
- Wired Extension—Extension Settings—CLIP Generate
- Wired Extension—FWD/DND
- Wired Extension—Speed Dial
- Wired Extension—Flexible Button
- Wired Extension—Flexible Button—Flexible Button Data Copy
- Wired Extension—NDSS Link Data - Send
- Wired Extension—Simplified Voice Message (KX-TDA50 only)
- Portable Station—Extension Settings
- Portable Station—Extension Settings—CLIP Generate
- Portable Station—FWD / DND
- Portable Station—Flexible Button
- Portable Station—Flexible Button—Flexible Button Data Copy
- Portable Station—Simplified Voice Message (KX-TDA50 only)
- DSS Console—Flexible Button
- DSS Console—Flexible Button—Flexible button Data Copy
- Optional Device
- External Pager
- Voice Message—DISA System
- Voice Message—DISA Message
- Voice Message—SVM (KX-TDA50 only)
- remote access
- External Relay
- External Sensor
- Feature
- Caller ID Modification
- Verification Code
- Second Dial Tone
- Absent Message
- Tenant
- ars mode
- Dialing Plan
- Dialing Plan—Auto Assign
- Hotel
- Denied Code
- Special Carrier Code
- Emergency Dial
- System Settings
- Leading Number
- Routing Plan Time
- Routing Plan Priority
- Carrier
- Leading Number Exception
- Authorization Code for TRG
- Private Network
- trunk group
- Network Data Transmission
- Network Operator (VoIP)
- NDSS Key Table
- CO & Incoming Call
- trunk group number
- DIL Table & Port Settings
- DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)
- DID Table—Automatic Registration (KX-TDA100/KX-TDA200/KX-TDA600 only)
- DID Table—Name Generate (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Miscellaneous
- Maintenance
- PT Programming Access
- Power Failure Transfer (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Appendix
- Revision History
- KX-TDA50 PSMPR Software File Version 4.0xxx
- Feature Programming References
HYBRID IP-PBX KX-TDA100
Table of contents
- safety notices
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Overview
- Introduction
- Entering Characters
- PC Programming
- Password Security
- Introduction of Maintenance Console
- Access Levels
- Software Interface
- Card Status
- Display Options
- Start Menu
- Start Menu—Connect—USB
- Start Menu—Connect—Modem
- Start Menu—Connect—Profile Setup
- File
- Disconnect
- Tool
- Tool—Call Pickup for My Group
- Tool—Import
- Tool—Export
- Tool—Screen Customize—User Level/Administrator Level
- Utility
- Utility—File Transfer PC to PBX (SD Card)
- system data
- Utility—File Transfer PBX (SD Card) to PC
- Utility—SD Card File View and Load
- Utility—Message File Transfer PC to PBX
- Utility—T1 Signaling Bit Monitor (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Utility—T1 Line Trace (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Utility—IP Extension Statistical Information
- Utility—CS Information
- Utility—PS Information
- Utility—System Reset—Reset by the Command
- Utility—Flash ROM ID Information
- Help
- setting features
- Configuration
- Slot
- Slot—Summary
- Slot—Card Property - MPR
- Slot—Card Property - Extension Type
- Slot—Port Property - Extension Port
- telephone type
- extension number
- dpt type—type
- ringing tone
- Slot—Port Property - Extension Port—Connection Command
- Slot—Port Property - Extension Port—Port Type View
- Slot—Port Property - CSI/F Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - CSI/F Port—Connection Command (KX-TDA100 KX-TDA200/KX-TDA600 only)
- Slot—Card Property - LCO type
- caller id—caller id signaling
- Slot—Port Property - LCO Port
- dialing mode
- pulse speed
- caller id detection
- flash time
- Slot—Port Property - LCO Port—Connection Command
- Slot—Card Property - PRI type (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- status message
- network configuration
- network type
- Slot—Port Property - PRI Port—Connection Command (KX-TDA100 KX-TDA200/KX-TDA600 only)
- Slot—Card Property - T1 type (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - T1 Port—Connection Command (KX-TDA100/KX-TDA200 KX-TDA600 only)
- Slot—Card Property - IP Gateway
- Slot—Port Property - IP-GW Port
- Slot—Port Property - IP-GW Port—Connection Command
- Slot—Card Property - IP Extension
- Slot—Card Property - IP Extension—Common Settings
- Slot—Port Property - IP-Extension Port
- Slot—Card Property - SIP Gateway (KX-TDA50 only)
- Slot—SIP-GW Port Property (KX-TDA50 only)
- Slot—OPB3 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
- input signal decision time
- input signal detection reopening time
- Slot—OPB3 Card Property—Card Command (KX-TDA100/KX-TDA200 KX-TDA600 only)
- Slot—OPB3 Option Card Setup (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Card Property - CTILINK (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Card Property - DPH type (KX-TDA50 only)
- for output (eio)—device type
- Slot—Card Property - ESVM Type (KX-TDA50 only)
- Document Version 2008-11 PC Programming Manual
- Portable Station
- personal identification number
- Option
- Clock Priority (KX-TDA100/KX-TDA200/KX-TDA600)
- System
- Date & Time/Daylight Saving
- Date & Time/Daylight Saving—Date & Time Setting
- Operator & BGM
- bgm and music on hold—sound on transfer
- Timers & Counters
- recall—transfer recall
- tone length—busy tone / dnd tone
- doorphone—call ring duration
- doorphone—open duration
- extension pin—lock counter
- Week Table
- Week Table—Time Setting
- Holiday Table
- Numbering Plan—Main
- operator call
- tie line access
- system speed dialing / personal speed dialing
- doorphone call
- group call pickup
- directed call pickup
- automatic callback busy cancel
- account code entry
- door open
- external feature access
- walking extension
- manual call waiting for extension call
- not ready (manual wrap-up) mode on / off
- log-in / log-out
- printing message
- extension feature clear
- Numbering Plan—Quick Dial
- phone number
- Numbering Plan—B/NA DND Call Feature
- call monitor
- Class of Service—COS Settings
- trs level for system speed dialing
- transfer to co
- account code mode
- executive busy override
- dnd override
- executive busy override deny
- door unlock
- Class of Service—External Call Block
- Class of Service—Internal Call Block
- Ring Tone Patterns—Call from CO
- Ring Tone Patterns—Call from Doorphone
- Ring Tone Patterns—Call from Others
- System Options
- pt lcd—password / pin display
- extension clear—call waiting
- extension clear—fwd/dnd
- confirmation tone—tone 1 : called by voice
- dss key—dss key mode for incoming call
- dss key—call pick-up by dss key for direct incoming call
- dss key—automatic transfer for extension call
- whisper ohca—for slt / apt / kx-t72xx
- call waiting—automatic call waiting for extension call
- Extension CID Settings
- Audio Gain—Paging/MOH
- Audio Gain—Card
- Group
- Trunk Group—TRG Settings
- line hunting order
- tone detection
- host pbx access code
- Trunk Group—Local Access Priority
- Caller ID Modification
- Dialing Plan
- Dialing Plan—Auto Assign
- Extension Group
- Call Pickup Group
- Call Pickup Group—All Setting
- Paging Group
- Paging Group—All Setting
- Paging Group—External Pager
- Incoming Call Distribution Group—Group Settings
- overflow queuing busy
- overflow no answer
- queuing time table
- extension no answer redirection time
- maximum no. of busy extension
- Incoming Call Distribution Group—Group Settings—Member List
- delayed ring
- Incoming Call Distribution Group—Queuing Time Table
- Incoming Call Distribution Group—Miscellaneous
- options—longest idle distribution (optional sd card required)
- Extension Hunting Group
- Extension Hunting Group—Member List
- VM(DPT) Group—System Settings
- VM(DPT) Group—Unit Settings
- VM(DPT) Group—Unit Settings—Member List
- VM(DTMF) Group—System Settings
- VM(DTMF) Group—Group Settings
- VM(DTMF) Group—Group Settings—Member List
- PS Ring Group
- PS Ring Group—Member List
- Extension
- Wired Extension—Extension Settings
- extension pin
- wireless xdp
- call pickup deny
- absent message
- display language
- key pad tone
- paging deny
- extension caller id
- Wired Extension—Extension Settings—CLIP Generate
- Wired Extension—FWD/DND
- Wired Extension—Speed Dial
- Wired Extension—Flexible Button
- mailbox number
- font size
- Wired Extension—Flexible Button—Flexible button data copy
- Wired Extension—PF Button
- Wired Extension—NDSS Link Data - Send
- Wired Extension—Simplified Voice Message
- Portable Station—Extension Settings
- Portable Station—Extension Settings—CLIP Generate
- Portable Station—FWD/DND
- Portable Station—Flexible Button
- Portable Station—Flexible Button—Flexible button data copy
- Portable Station—NDSS Link Data - Send
- Portable Station—Simplified Voice Message
- DSS Console
- DSS Console—DSS key data copy
- Optional Device
- Doorphone
- External Pager
- Voice Message—DISA System
- recording mode
- Voice Message—DISA Message
- Voice Message—SVM
- remote access
- External Relay
- External Sensor
- Feature
- System Speed Dial
- Hotel
- Verification Code
- Second Dial Tone
- Absent Message
- Tenant
- ars mode
- Denied Code
- Exception Code
- Special Carrier
- Emergency Dial
- Miscellaneous
- System Setting
- Leading Number
- Routing Plan Time
- Routing Plan Time—Time Setting
- Routing Plan Priority
- Carrier
- Leading Number Exception
- Authorization Code for TRG
- TIE Table
- trunk group
- Network Data Transmission
- Network Operator (VoIP)
- NDSS Key Table
- CO & Incoming Call
- CO Line Settings
- trunk group number
- DIL Table & Port Settings
- DID Table
- DID Table—Automatic Registration
- DID Table—Name Generate
- Maintenance
- Main
- print information—error log
- smdr options
- communication—baud rate
- communication—parity bit
- communication—stop bit
- daily test start time—set
- daily test start time—hour
- PT Programming Access
- Power Failure Transfer (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Appendix
- Revision History
- KX-TDA100/KX-TDA200 PMPR Software File Version 5.0xxx
- KX-TDA50 PSMPR Software File Version 4.0xxx
- KX-TDA50 PSMPR Software File Version 5.0xxx
- Feature Programming References
- automatic extension release
- call hold
- call park
- call transfer
- call waiting tone
- co line access
- co line call limitation
- data line security
- dial tone
- display information
- Table Of Contents
- emergency call
- extension port configuration
- flexible buttons
- floating extension
- group features
- headset operation
- Table Of Contents
- idle extension hunting
- incoming call features
- internal call block
- local alarm information
- message waiting
- operator features
- paralleled telephone
- pause insertion
- power failure transfer
- quick dialing
- ring tone pattern selection
- special carrier access code
- t1 line service
- timed reminder
- verification code entry
- voice mail dtmf integration
- walking cos
HYBRID IP-PBX KX-TDA100
Table of contents
- safety notices
- Feature Manual Document Version
- list of abbreviations
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Features and Configurations—A
- absent message
- Absent Message
- Account Code Entry
- ARS (Automatic Route Selection)
- itemized billing code
- Automatic Callback Busy (Camp-on)
- Automatic Extension Release
- automatic time adjustment
- Automatic Time Adjustment
- Features and Configurations—B
- BGM (Background Music)
- Features and Configurations—C
- Caller ID
- call hold
- Call Hold
- Call Log, Incoming
- call monitor
- Call Monitor
- Call Park
- Call Pickup
- Call Splitting
- Call Transfer
- call waiting features
- CALL WAITING FEATURES
- call waiting tone
- CELLULAR PHONE FEATURES
- CLI (Calling Line Identification) Distribution
- CLIP (Calling Line Identification Presentation)
- co line access
- CO Line Access
- CO Line Call Limitation
- Conference
- Conference Group Call (KX-TDA50 only)
- confirmation tone
- Confirmation Tone
- CPC (Calling Party Control) Signal Detection
- CTI (Computer Telephony Integration)
- Features and Configurations—D
- data line security
- dial tone
- Dial Tone
- Dial Tone Transfer
- DID (Direct Inward Dialing)
- DIL (Direct In Line)
- DISA (Direct Inward System Access)
- disa intercept routing—no dial
- outgoing message (ogm)
- disa intercept routing—dnd
- Display Information
- DND (Do Not Disturb)
- Door Open
- Doorphone Call
- Document Version 2010-11 Feature Manual
- emergency call
- Data Line Security
- Extension Dial Lock
- Extension Feature Clear
- Extension PIN (Personal Identification Number)
- Extension Port Configuration
- external relay
- External Relay
- External Sensor
- Features and Configurations—F
- fixed buttons
- Fixed Buttons
- EFA (External Feature Access)
- Flash/Recall/Terminate
- Flexible Buttons
- Flexible Numbering/Fixed Numbering
- floating extension
- Floating Extension
- FWD (Call Forwarding)
- FWD/DND Button, Group FWD Button
- Features and Configurations—G
- group features
- GROUP FEATURES
- Features and Configurations—H
- Hands-free Answerback
- Headset Operation
- HOSPITALITY FEATURES
- hot line
- Hot Line
- Features and Configurations—I
- icd group features
- ICD GROUP FEATURES
- ICD Group Features—Group Call Distribution
- ICD Group Features—Log-in/Log-out
- ICD Group Features—Outside Destinations
- ICD Group Features—Overflow
- ICD Group Features—Queuing
- ICD Group Features—Supervisory
- ICD Group Features—VIP Call
- idle extension hunting
- Idle Extension Hunting
- incoming call features
- INCOMING CALL FEATURES
- intercept routing
- Intercept Routing
- intercom call
- Intercom Call
- Internal Call Block
- IP-PT (IP Proprietary Telephone)
- ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
- Features and Configurations—L
- led indication
- LED Indication
- Line Preference—Incoming
- Line Preference—Outgoing
- local alarm information
- Local Alarm Information
- Features and Configurations—M
- manager features
- Manager Features
- MEMORY DIALING FEATURES
- message waiting
- Message Waiting
- music on hold
- Music on Hold
- Features and Configurations—O
- OGM (Outgoing Message)
- OHCA (Off-hook Call Announcement)
- One-touch Dialing
- Operator Features
- Features and Configurations—P
- paging group
- Paging
- paralleled telephone
- Paralleled Telephone
- Password Security
- Pause Insertion
- PC Console/PC Phone
- PC Programming
- PDN (Primary Directory Number)/SDN (Secondary Directory Number Extension
- delayed ringing
- Power Failure Restart
- Power Failure Transfer
- Predialing
- Privacy Release
- PRIVATE NETWORK FEATURES
- Private Network Features—Centralized Voice Mail
- multiple vpss
- Private Network Features—NDSS (Network Direct Station Selection)
- Private Network Features—Network ICD Group
- Private Network Features—PS Roaming by Network ICD Group
- PRIVATE NETWORK FEATURES—QSIG
- Presentation) and CNIP/CONP (Calling/Connected Name Identification Presentation)
- Private Network Features—QSIG—CT (Call Transfer)
- Private Network Features—VoIP (Voice over Internet Protocol)
- PS (Portable Station)
- PS—CO Status Display (KX-WT125/KX-WT126 only) (KX-TDA50 only)
- PS—Ring Group
- PT Programming
- quick dialing
- Quick Dialing
- Quick Setup
- Features and Configurations—R
- Redial, Last Number
- room status control
- Room Status Control
- Features and Configurations—S
- SMDR (Station Message Detail Recording)
- Special Carrier Access Code
- Speed Dialing, Personal
- Speed Dialing, System
- SVM (Simplified Voice Message)
- message notification
- Features and Configurations—T
- t1 line service
- TAFAS (Trunk Answer From Any Station)
- Tenant Service
- timed reminder
- Timed Reminder
- Time Service
- TRS (Toll Restriction)
- exception code tables
- Features and Configurations—U
- Features and Configurations—V
- verification code entry
- Verification Code Entry
- Virtual PS
- Voice Mail (VM) Group
- Voice Mail DPT (Digital) Integration
- live call screening (lcs)
- voice mail dtmf integration
- Voice Mail DTMF Integration
- Features and Configurations—W
- walking cos
- Walking COS
- whisper ohca
- Whisper OHCA
- Appendix
- capacity of system resources
- Emergency Call
- voice message
- T1 Line Service
- Tones/Ring Tones
- Revision History
- KX-TDA100/KX-TDA200 PMPR Software File Version 2.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.2xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 5.0xxx
- KX-TDA50 PSMPR Software File Version 2.0xxx
- KX-TDA50 PSMPR Software File Version 3.0xxx
- KX-TDA50 PSMPR Software File Version 4.0xxx
- KX-TDA50 PSMPR Software File Version 5.0xxx
- KX-TDA50 PSMPR Software File Version 6.0xxx
- Index
- Table Of Contents
- Off-hook Monitor
- PS—Directory
HYBRID IP-PBX KX-TDA100
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Overview
- Introduction
- entering characters
- system requirements
- installing the maintenance console
- password security
- KX-TDA Maintenance Console Operating Instructions
- starting maintenance console and software modes
- access levels
- software interface
- card status
- display options
- extension number setting
- File
- File—Open
- File—Close
- File—Save
- File—Save As
- File—Exit
- Connect
- Connect—USB
- Connect—LAN (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Connect—Modem
- Connect—ISDN Remote
- Connect—Disconnect
- Tool
- Tool—BRI Automatic Configuration
- Tool—NDSS Link Data Clear
- Tool—DXDP All OUS
- Tool—Simplified Voice Message—Delete All Recordings (KX-TDA30 only)
- Tool—Simplified Voice Message—Check Current Usage (KX-TDA30 only)
- Tool—Extension List View
- Tool—Import
- Tool—Export
- Tool—Programmer Code Change
- Tool—Screen Customize—User Level/Administrator Level
- Tool—Languages
- Tool—Profile Setup
- Tool—Profile Editor
- Tool—System Data Convert
- Utility
- Utility—File Transfer PC to PBX (SD Card)
- Utility—File Transfer PBX (SD Card) to PC
- Utility—SD Card File View and Load
- Utility—SD Card File Delete
- Utility—Message File Transfer PC to PBX
- Utility—Message File Transfer PBX to PC
- Utility—Error Log
- Utility—T1/E1 Signalling Bit Monitor (for KX-TDA100/KX-TDA200/KX-TDA600) / E1 Signalling Bit Monitor (for KX-TDA30)
- Utility—T1/E1 Line Trace (for KX-TDA100/KX-TDA200/KX-TDA600) / E1 Line Trace (for KX-TDA30)
- Utility—ISDN/QSIG Protocol Trace
- Utility—Digital Trunk Error Report
- Utility—IP Extension Statistical Information (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Utility—CS Information
- Utility—PS Information
- Utility—Timed Update
- Utility—System Reset—Reset by the Command
- Utility—Flash ROM ID Information
- Help
- Configuration
- Slot—Summary
- Slot—MPR Card Property
- Slot—Extension Card Property
- Slot—Extension Port
- extension number
- extension name
- Slot—Extension Port—Port Command
- Slot—Extension Port—Port Type View
- Slot—CSI/F Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—CSI/F Port—Port Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—LCO Card Property
- Slot—LCO Port
- busy out status
- Slot—LCO Port—Port Command
- Slot—BRI/PRI Card Property
- Slot—BRI Port
- Slot—BRI Port—Port Command
- Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- network configuration
- Slot—PRI Port—Port Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—T1 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—T1 Port—Channel Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—E1 Card Property
- Slot—E1 Card Property—Line Signal Setting
- Slot—E1 Card Property—MFC1
- Slot—E1 Card Property—MFC2
- Slot—E1 Port
- Slot—E1 Port—Channel Command
- Slot—E&M Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—E&M Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—E&M Port—Port Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—DID Card Property
- Slot—DID Port
- Slot—DID Port—Port Command
- Slot—IP-GW Card Property
- Slot—IP-GW Port
- Slot—IP-GW Port —Port Command
- subnet mask
- Slot—IP-Extension Card Property—Common Settings (KX-TDA100/KX-TDA200/KX TDA600 only) (MPR Software File Version 3.1000 or later)
- Slot—IP-Extension Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—OPB (KX-TDA100/KX-TDA200/KX-TDA600 only)
- port status
- device type
- Slot—OPB Card Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—OPB3 Option Card Setup (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—CTI-LINK Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—DPH Card Property (KX-TDA30 only)
- Slot—DPH Port Command (KX-TDA30 only)
- Portable Station
- Option
- Clock Priority
- System
- Date & Time/Daylight Saving—Date & Time Setting
- Operator & BGM
- Timers & Counters
- Week Table
- Week Table—Time Setting
- Holiday Table
- leading number
- trunk group access
- doorphone call
- single co line access
- directed call pickup
- automatic callback busy cancel
- account code entry
- door open
- walking extension
- incoming call queue monitor
- extension feature clear
- busy out cancel
- other pbx extension
- Numbering Plan—Quick Dial
- executive busy override
- call monitor
- automatic callback busy
- Class of Service—COS Settings
- transfer to co
- account code mode
- dnd override
- executive busy override deny
- programming mode level
- door unlock
- Class of Service—External Call Block
- Class of Service—Internal Call Block
- Ring Tone Patterns—Call from CO
- Ring Tone Patterns—Call from Doorphone
- Ring Tone Patterns—Call from Others
- System Options
- Extension CID Settings
- Audio Gain—Paging/MOH
- Audio Gain—Card (KX-TDA100/KX-TDA200/KX-TDA600 only)
- IP Extension Settings (KX-TDA100/KX-TDA200/KX-TDA600 only) (not available for MPR Software File Version 3.1000 or later)
- Group
- line hunting order
- host pbx access code
- Trunk Group—Local Access Priority
- Trunk Group—Charge Rate
- User Group
- Call Pickup Group
- Call Pickup Group—All Setting
- Paging Group
- Paging Group—All Setting
- external pager
- Incoming Call Distribution Group—Group Settings
- overflow queuing busy
- overflow no answer
- queuing time table
- extension no answer redirection time
- Incoming Call Distribution Group—Queuing Time Table
- Incoming Call Distribution Group—Miscellaneous
- Incoming Call Distribution Group—Member
- delayed ring
- Extension Hunting Group
- Extension Hunting Group—Member List
- VM(DPT) Group—System Settings
- VM(DPT) Group—Unit Settings
- VM(DPT) Group—Unit Settings—Member List
- VM(DTMF) Group—System Settings
- VM(DTMF) Group—Group Settings
- VM(DTMF) Group—Group Settings—Member List
- PS Ring Group
- PS Ring Group—Member List
- Broadcasting Group
- Broadcasting Group—Member List
- Extension
- user group
- absent message
- paging deny
- Wired Extension—Extension Settings—CLIP Generate
- Wired Extension—FWD/DND
- Wired Extension—Speed Dial
- Wired Extension—Flexible Button
- Wired Extension—Flexible Button—Flexible Button Data Copy
- Wired Extension—PF Button
- Wired Extension—NDSS Link Data - Send
- Wired Extension—Simplified Voice Message (KX-TDA30 only)
- Portable Station—Extension Settings
- Portable Station—Extension Settings—CLIP Generate
- Portable Station—FWD / DND
- Portable Station—Flexible Button
- Portable Station—Flexible Button—Flexible Button Data Copy
- Portable Station—NDSS Link Data - Send
- Portable Station—Simplified Voice Message (KX-TDA30 only)
- DSS Console—Flexible Button
- DSS Console—Flexible Button—Flexible button Data Copy
- Optional Device
- External Pager
- Voice Message—DISA System
- Voice Message—DISA Message
- Voice Message—SVM (KX-TDA30 only)
- remote access
- External Relay
- External Sensor
- Feature
- caller id modification
- verification code
- itemised billing code for ars
- budget management
- Second Dial Tone
- Absent Message
- music on hold
- ars mode
- Dialling Plan
- Dialling Plan—Auto Assign
- Hotel & Charge
- Denied Code
- Exception Code
- special carrier access code
- emergency number
- Miscellaneous
- System Settings
- Leading Number
- Routing Plan Time
- Routing Plan Time—Time Setting
- Routing Plan Priority
- Carrier
- leading number exception
- Authorisation Code for TRG
- Private Network
- trunk group
- Network Data Transmission
- Network Operator (VoIP)
- NDSS Key Table
- CO & Incoming Call
- trunk group number
- DIL Table & Port Settings
- DDI / DID Table
- DDI/DID Table—Automatic Registration
- DDI/DID Table—Name Generate
- MSN Table
- Maintenance
- PT Programming Access
- Power Failure Transfer (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Appendix
- revision history
- feature programming references
HYBRID IP-PBX KX-TDA100
Table of contents
- feature highlights
- list of abbreviations
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Features and Configurations
- Absent Message
- Account Code Entry
- ARS (Automatic Route Selection)
- Automatic Callback Busy (Camp-on)
- Automatic Extension Release
- Automatic Fax Transfer
- Automatic Time Adjustment
- BGM (Background Music)
- Caller ID
- Call Hold
- Call Log, Incoming
- Call Monitor
- Call Park
- Call Pickup
- Call Splitting
- Call Transfer
- CALL WAITING FEATURES
- Call Waiting Tone
- CELLULAR PHONE FEATURES
- CLI (Calling Line Identification) Distribution
- CLIP (Calling Line Identification Presentation)
- CO Line Access
- CO Line Call Limitation
- Conference
- Confirmation Tone
- Consultation Hold
- CPC (Calling Party Control) Signal Detection
- CTI (Computer Telephony Integration)
- Data Line Security
- Dial Tone
- Dial Tone Transfer
- DID (Direct Inward Dialing)
- DIL (Direct In Line)
- DISA (Direct Inward System Access)
- Display Information
- DND (Do Not Disturb)
- Door Open
- Doorphone Call
- EFA (External Feature Access)
- Emergency Call
- Extension Dial Lock
- Extension Feature Clear
- Extension PIN (Personal Identification Number)
- Extension Port Configuration
- External Relay
- External Sensor
- Fixed Buttons
- Flash/Recall/Terminate
- Flexible Buttons
- Flexible Numbering/Fixed Numbering
- Floating Extension
- FWD (Call Forwarding)
- FWD/DND Button, Group FWD Button
- GROUP FEATURES
- Hands-free Answerback
- Hands-free Operation
- HOSPITALITY FEATURES
- Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
- Hot Line
- ICD GROUP FEATURES
- ICD Group Features—Group Call Distribution
- ICD Group Features—Log-in/Log-out
- ICD Group Features—Outside Destinations
- ICD Group Features—Overflow
- ICD Group Features—Queuing
- ICD Group Features—Supervisory
- ICD Group Features—VIP Call
- Idle Extension Hunting
- INCOMING CALL FEATURES
- Intercept Routing
- Intercept Routing—No Destination
- Internal Call Block
- IP-PT (IP Proprietary Telephone)
- ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
- LED Indication
- Line Preference—Incoming
- Line Preference—Outgoing
- Local Alarm Information
- Manager Features
- MEMORY DIALING FEATURES
- Message Waiting
- Music on Hold
- Mute
- Off-hook Monitor
- OHCA (Off-hook Call Announcement)
- One-touch Dialing
- Operator Features
- Paging
- Paralleled Telephone
- Password Security
- Pause Insertion
- PC Programming
- PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension
- Power Failure Restart
- Power Failure Transfer
- Predialing
- Printing Message
- PRIVATE NETWORK FEATURES
- Private Network Features—Centralized Voice Mail
- Private Network Features—NDSS (Network Direct Station Selection)
- Private Network Features—Network ICD Group
- Private Network Features—PS Roaming by Network ICD Group
- PRIVATE NETWORK FEATURES—QSIG
- Private Network Features—QSIG—CCBS (Completion of Calls to Busy Subscriber)
- Private Network Features—QSIG—CT (Call Transfer)
- Private Network Features—VoIP (Voice over Internet Protocol)
- PS Connection
- PS Directory
- PS Feature Buttons
- PT Programming
- Quick Dialing
- Quick Setup
- Redial, Last Number
- Ring Tone Pattern Selection
- Room Status Control
- SMDR (Station Message Detail Recording)
- Special Carrier Access Code
- Speed Dialing, Personal
- Speed Dialing, System
- SVM (Simplified Voice Message)
- T1 Line Service
- TAFAS (Trunk Answer From Any Station)
- Tenant Service
- Timed Reminder
- Time Service
- TRS (Toll Restriction)
- Upgrading the Software
- Verification Code Entry
- Virtual PS
- Voice Mail (VM) Group
- Voice Mail DPT (Digital) Integration
- Voice Mail DTMF Integration
- Walking COS
- Walking Extension
- Whisper OHCA
- Wireless XDP Parallel Mode
- Appendix
- Capacity of System Resources
- voice message
- Exclusive Features Table
- Tones/Ring Tones
- Revision History
- KX-TDA100/KX-TDA200 PMPR Software File Version 2.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.2xxx
- KX-TDA50 PSMPR Software File Version 1.1xxx
- KX-TDA50 PSMPR Software File Version 2.0xxx
- KX-TDA50 PSMPR Software File Version 4.0xxx
- Index
HYBRID IP-PBX KX-TDA100
Table of contents
- Table Of Contents
- Introduction
- Overview
- Using IP Proprietary Telephones on Local and Remote Office LANs
- network parameters
- Network Management
- VLAN (Virtual LAN)
- Guidance for VoIP Installation
- VoIP Requirements
- Network Devices
- VoIP Requirements Checklist
- Installation
- Installing in the KX-TDA50 PBX
- Installing in the KX-TDA100/KX-TDA200/KX-TDA600 PBX
- Connecting to the LAN
- Connecting the IP Proprietary Telephones
- Programming
- Programming the IP-EXT Card
- Programming the IP Proprietary Telephone
- Setting the VLAN Parameters
- Registering IP Proprietary Telephones
- De-registering IP-PTs
- A Troubleshooting
- A1 Troubleshooting
- A1.2 Error Messages
HYBRID IP-PBX KX-TDA100
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Overview
- Introduction
- PC Programming
- Password Security
- Maintenance Console Operating Instructions
- Access Levels
- Software Interface
- Card Status
- Display Options
- Start Menu
- Start Menu—Connect—RS-232C
- Start Menu—Connect—LAN
- Start Menu—Connect—Modem
- Start Menu—Connect—Profile Setup
- File
- Disconnect
- Tool
- Tool—Simplified Voice Message—Check Current Usage
- Tool—Export
- Utility
- Utility—File Transfer PC to PBX (SD Card)
- system data
- Utility—File Transfer PBX (SD Card) to PC
- Utility—SD Card File View and Load
- Utility—SD Card File Delete
- Utility—Message File Transfer PBX to PC
- Utility—T1 Signaling Bit Monitor (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Utility—T1 Line Trace (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Utility—Digital Trunk Error Report (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Utility—IP Extension Statistical Information
- Utility—PS Information
- Utility—Timed Update (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Utility—System Reset—Reset by the Command
- Utility—Flash ROM ID Information
- Help
- setting features
- Configuration
- Slot—Summary
- Slot—Card Property - MPR
- Slot—Card Property - Extension Type
- Slot—Port Property - Extension Port
- Slot—Port Property - Extension Port—Connection Command
- Slot—Port Property - Extension Port—Port Type View
- Slot—Port Property - CSI/F Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - CSI/F Port—Connection Command (KX-TDA100/KX-TDA200 KX-TDA600 only)
- Slot—Card Property - LCO type
- Slot—Port Property - LCO Port
- dialing mode
- pulse speed
- caller id detection
- Slot—Port Property - LCO Port—Connection Command
- Slot—Card Property - PRI type (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- status message
- network configuration
- network type
- Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - T1 Port—Connection Command (KX-TDA100/KX-TDA200/KX TDA600 only)
- Slot—Card Property - IP Gateway
- Slot—Port Property - IP-GW Port
- Slot—Port Property - IP-GW Port—Connection Command
- Slot—Card Property - IP Extension
- subnet mask
- Slot—Card Property - IP Extension—Common Settings
- Slot—Port Property - IP-Extension Port
- Slot—OPB3 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—OPB3 Card Property—Card Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—OPB3 Option Card Setup (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Card Property - CTILINK (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Card Property - DPH type (KX-TDA50 only)
- Slot—Card Property - DPH type—Connection Command (KX-TDA50 only)
- Portable Station
- personal identification number
- Option
- Clock Priority (KX-TDA100/KX-TDA200/KX-TDA600)
- System
- Date & Time/Daylight Saving—Date & Time Setting
- Operator & BGM
- Timers & Counters
- Week Table
- Holiday Table
- Numbering Plan—Main
- operator call
- tie line access
- doorphone call
- group paging
- group call pickup
- automatic callback busy cancel
- account code entry
- door open
- external feature access
- walking extension
- printing message
- extension feature clear
- Numbering Plan—Quick Dial
- Numbering Plan—B/NA DND Call Feature
- Class of Service—COS Settings
- trs level for system speed dialing
- account code mode
- dnd override
- executive busy override deny
- door unlock
- Class of Service—External Call Block
- Class of Service—Internal Call Block
- Ring Tone Patterns—Call from CO
- Ring Tone Patterns—Call from Others
- System Options
- Extension CID Settings
- Audio Gain—Paging/MOH
- Audio Gain—Card
- Group
- tone detection
- host pbx access code
- Trunk Group—Local Access Priority
- Dialing Plan
- Dialing Plan—Auto Assign
- Call Pickup Group
- Call Pickup Group—All Setting
- Paging Group
- Paging Group—All Setting
- Paging Group—External Pager
- Incoming Call Distribution Group—Group Settings
- queuing time table
- Incoming Call Distribution Group—Member List
- delayed ring
- Incoming Call Distribution Group—Queuing Time Table
- Incoming Call Distribution Group—Miscellaneous
- Extension Hunting Group
- hunting type
- Extension Hunting Group—Member List
- VM(DPT) Group—System Settings
- VM(DPT) Group—Unit Settings
- VM(DPT) Group—Unit Settings—Member List
- VM(DTMF) Group—System Settings
- VM(DTMF) Group—Group Settings
- VM(DTMF) Group—Group Settings—Member List
- PS Ring Group
- PS Ring Group—Member List
- Extension
- paging deny
- Wired Extension—Extension Settings—CLIP Generate
- Wired Extension—FWD/DND
- Wired Extension—Speed Dial
- Wired Extension—Flexible Button
- Wired Extension—Flexible Button—Flexible button data copy
- Wired Extension—NDSS Link Data - Send
- Wired Extension—Simplified Voice Message
- Portable Station—Extension Settings
- Portable Station—Extension Settings—CLIP Generate
- Portable Station—FWD / DND
- Portable Station—Flexible Button
- Portable Station—Flexible Button—Flexible button data copy
- Portable Station—Simplified Voice Message
- DSS Console
- DSS Console—DSS key data copy
- Optional Device
- External Pager
- Voice Message—DISA System
- Voice Message—DISA Message
- Voice Message—SVM
- recording mode
- External Relay
- External Sensor
- Feature
- Hotel
- Verification Code
- Second Dial Tone
- Absent Message
- Tenant
- ars mode
- system speed dial
- Denied Code
- Special Carrier
- Emergency Dial
- System Setting
- Leading Number
- Routing Plan Time
- Routing Plan Priority
- Carrier
- Leading Number Exception
- Authorization Code for TRG
- Private Network
- trunk group
- Network Data Transmission
- Network Operator (VoIP)
- NDSS Key Table
- CO & Incoming Call
- trunk group number
- DIL Table & Port Settings
- DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)
- did name
- DID Table—Automatic Registration (KX-TDA100/KX-TDA200/KX-TDA600 only)
- DID Table—Name Generate (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Miscellaneous
- Maintenance
- smdr options
- PT Programming Access
- Power Failure Transfer (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Appendix
- Revision History
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.2xxx
- KX-TDA50 PSMPR Software File Version 4.0xxx
- Feature Programming References
HYBRID IP-PBX KX-TDA100
Table of contents
- feature highlights
- list of abbreviations
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Features and Configurations
- Absent Message
- Account Code Entry
- ARS (Automatic Route Selection)
- Automatic Callback Busy (Camp-on)
- Automatic Extension Release
- Automatic Fax Transfer
- Automatic Time Adjustment
- BGM (Background Music)
- Caller ID
- Call Hold
- Call Log, Incoming
- Call Monitor
- Call Park
- Call Pickup
- Call Splitting
- CALL WAITING FEATURES
- Call Waiting Tone
- CELLULAR PHONE FEATURES
- CLI (Calling Line Identification) Distribution
- CLIP (Calling Line Identification Presentation)
- CO Line Access
- CO Line Call Limitation
- Conference
- Confirmation Tone
- Consultation Hold
- CPC (Calling Party Control) Signal Detection
- CTI (Computer Telephony Integration)
- Data Line Security
- Dial Tone
- Dial Tone Transfer
- DID (Direct Inward Dialing)
- DIL (Direct In Line)
- DISA (Direct Inward System Access)
- Display Information
- DND (Do Not Disturb)
- Door Open
- Doorphone Call
- EFA (External Feature Access)
- Emergency Call
- Extension Dial Lock
- Extension Feature Clear
- Extension PIN (Personal Identification Number)
- Extension Port Configuration
- External Relay
- External Sensor
- Fixed Buttons
- Flash/Recall/Terminate
- Flexible Buttons
- Flexible Numbering/Fixed Numbering
- Floating Extension
- FWD (Call Forwarding)
- FWD/DND Button, Group FWD Button
- group features
- GROUP FEATURES
- Hands-free Answerback
- Headset Operation
- HOSPITALITY FEATURES
- hot line
- Hot Line
- ICD GROUP FEATURES
- ICD Group Features—Group Call Distribution
- ICD Group Features—Log-in/Log-out
- ICD Group Features—Outside Destinations
- ICD Group Features—Overflow
- ICD Group Features—Queuing
- ICD Group Features—Supervisory
- idle extension hunting
- Idle Extension Hunting
- INCOMING CALL FEATURES
- intercept routing
- Intercept Routing
- Intercept Routing—No Destination
- Intercom Call
- Internal Call Block
- IP-PT (IP Proprietary Telephone)
- ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
- led indication
- Line Preference—Incoming
- Line Preference—Outgoing
- Local Alarm Information
- manager features
- MEMORY DIALING FEATURES
- message waiting
- Message Waiting
- music on hold
- Music on Hold
- OGM (Outgoing Message)
- One-touch Dialing
- Paging
- Paralleled Telephone
- OHCA (Off-hook Call Announcement)
- Password Security
- Pause Insertion
- PC Console/PC Phone
- PC Programming
- Power Failure Restart
- Power Failure Transfer
- Predialing
- Printing Message
- PRIVATE NETWORK FEATURES
- Private Network Features—Network ICD Group
- Private Network Features—PS Roaming by Network ICD Group
- PRIVATE NETWORK FEATURES—QSIG
- Private Network Features—QSIG—CCBS (Completion of Calls to Busy Subscriber)
- Private Network Features—QSIG—CF (Call Forwarding)
- Private Network Features—QSIG—CT (Call Transfer)
- Private Network Features—VoIP (Voice over Internet Protocol)
- PS Connection
- PS Directory
- PS Feature Buttons
- PS Ring Group
- PT Programming
- Quick Dialing
- Redial, Last Number
- Room Status Control
- SMDR (Station Message Detail Recording)
- Special Carrier Access Code
- Speed Dialing, Personal
- Speed Dialing, System
- SVM (Simplified Voice Message)
- TAFAS (Trunk Answer From Any Station)
- timed reminder
- Timed Reminder
- time service
- Time Service
- TRS (Toll Restriction)
- Verification Code Entry
- Virtual PS
- Voice Mail (VM) Group
- Voice Mail DPT (Digital) Integration
- Voice Mail DTMF Integration
- walking cos
- Walking COS
- Whisper OHCA
- wireless xdp parallel mode
- Wireless XDP Parallel Mode
- Capacity of System Resources
- Exclusive Features Table
- Tones/Ring Tones
- Revision History
- KX-TDA50 PSMPR Software File Version 1.1xxx
- KX-TDA50 PSMPR Software File Version 3.0xxx
- Index
HYBRID IP-PBX KX-TDA100
Table of contents
- user manual
- important information
- Table Of Contents
- Table Of Contents
- Operation
- Before Operating the Telephones
- when you use a panasonic proprietary telephone
- how to follow the steps
- connection example
- Making Calls
- calling an outside party
- Easy Dialling
- Redial
- When the Dialled Line is Busy or There is No Answer
- Accessing the ISDN Service (ISDN Service Access)
- Alternating the Calling Method (Alternate Calling—Ring/Voice)
- Calling without Restrictions
- To Access Another Party Directly from Outside (Direct Inward System Access [DISA])
- Setting Your Telephone from Another Extension or through DISA (Remote Setting)
- Receiving Calls
- Answering Hands-free (Hands-free Answerback)
- Answering a Call Ringing at Another Telephone (Call Pickup)
- Answering a Call via an External Speaker (Trunk Answer From Any Station [TAFAS])
- Using the ANSWER/RELEASE Button
- Identifying Malicious Calling Parties (Malicious Call Identification [MCID])
- During a Conversation
- transferring to an outside party using the pbx service
- Holding a Call
- Talking to Two Parties Alternately (Call Splitting)
- Answering a Call Waiting
- answering call waiting from the telephone company
- Multiple Party Conversation
- Mute
- Letting Other People Listen to the Conversation (Off-hook Monitor)
- Using the Headset (Headset Operation)
- Before Leaving Your Desk
- Showing a Message on the Caller's Telephone Display (Absent Message)
- Preventing Other People from Using Your Telephone (Extension Lock)
- Making/Answering an Announcement
- Answering/Denying a Paging Announcement
- Setting the Telephone According to Your Needs
- Refusing Incoming Calls (Do Not Disturb [DND])
- Receiving Call Waiting (Call Waiting/Off-hook Call Announcement [OHCA]/Whisper OHCA)
- Preventing Your Number Being Displayed on the Called Party's Telephone (Calling Line Identification Restriction [CLIR])
- Turning on the Background Music (BGM)
- Protecting Your Line against Notification Tones (Data Line Security)
- Checking the Time Service Status
- Setting the Parallelled Telephone to Ring (Parallelled Telephone)
- Using Your PS in Parallel with a Wired Telephone (Wireless XDP Parallel Mode)
- Clearing Features Set at Your Extension (Extension Feature Clear)
- Utilising the Call Centre
- monitoring the status of waiting calls
- Forwarding a Waiting Call (Manual Queue Redirection)
- Using User-supplied Equipment
- If a Host PBX is Connected
- If a Voice Processing System is Connected
- private mode
- After Moving to a New Location in the Office
- Using a Display Proprietary Telephone
- Using the Directories
- entering characters
- Accessing System Features (System Feature Access)
- Manager Operation
- Control Features
- Time Service Mode Control
- Restriction Level Control (Dial Tone Transfer)
- Turning on the External Background Music (BGM)
- Recording Outgoing Messages (OGM)
- Customising Your Phone & System
- Customising Your Phone (Personal Programming)
- Settings on the Programming Mode
- clearing features
- Customising the Buttons
- Manager Programming
- Customising Your System (System Programming)
- System Programming
- Appendix
- Troubleshooting
- Feature Number Table
- What is This Tone
HYBRID IP-PBX KX-TDA100
Table of contents
- safety notices
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Overview
- Introduction
- Entering Characters
- PC Programming
- Password Security
- Introduction of Maintenance Console
- Access Levels
- Software Interface
- Card Status
- Extension Number Setting
- Program launcher
- Program launcher—Connect—USB
- Program launcher—Connect—LAN
- Program launcher—Connect—Profile Setup
- File
- Disconnect
- Tool
- Tool—Call Pickup for My Group
- Tool—Import
- Tool—Export
- Tool—Screen Customize—User Level/Administrator Level
- Utility
- Utility—File Transfer PC to PBX (SD Card)
- system data
- Utility—File Transfer PBX (SD Card) to PC
- Utility—SD Card File View and Load
- Utility—Message File Transfer PC to PBX
- Utility—T1 Signaling Bit Monitor (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Utility—T1 Line Trace (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Utility—IP Extension Statistical Information
- Utility—CS Information
- Utility—PS Information
- Utility—Timed Update (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Utility—System Reset—Reset by the Command
- Utility—Flash ROM ID Information
- Help
- setting features
- Configuration
- Slot
- Slot—Summary
- Slot—Card Property - MPR
- Slot—Card Property - Extension Type
- Slot—Port Property - Extension Port
- Slot—Port Property - Extension Port—Connection Command
- Slot—Port Property - Extension Port—Port Type View
- Slot—Port Property - CSI/F Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - CSI/F Port—Connection Command (KX-TDA100 KX-TDA200/KX-TDA600 only)
- Slot—Card Property - LCO type
- Slot—Port Property - LCO Port
- dialing mode
- pulse speed
- caller id detection
- Slot—Port Property - LCO Port—Connection Command
- Slot—Card Property - PRI type (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- status message
- network configuration
- network type
- Slot—Port Property - PRI Port—Connection Command (KX-TDA100 KX-TDA200/KX-TDA600 only)
- Slot—Card Property - T1 type (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - T1 Port—Connection Command (KX-TDA100/KX-TDA200 KX-TDA600 only)
- Slot—Card Property - IP Gateway
- Slot—Port Property - IP-GW Port
- Slot—Port Property - IP-GW Port—Connection Command
- Slot—Card Property - IP Extension
- Slot—Card Property - IP Extension—Common Settings
- Slot—Port Property - IP-Extension Port
- Slot—Card Property - SIP Gateway (KX-TDA50 only)
- Slot—SIP-GW Port Property (KX-TDA50 only)
- Slot—OPB3 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—OPB3 Card Property—Card Command (KX-TDA100/KX-TDA200 KX-TDA600 only)
- Slot—OPB3 Option Card Setup (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Card Property - CTILINK (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Card Property - DPH type (KX-TDA50 only)
- Slot—Card Property - ESVM Type (KX-TDA50 only)
- Document Version 2010-11 PC Programming Manual
- Portable Station
- personal identification number
- Option
- Clock Priority (KX-TDA100/KX-TDA200/KX-TDA600)
- System
- Date & Time/Daylight Saving
- Date & Time/Daylight Saving—Date & Time Setting
- Operator & BGM
- Timers & Counters
- Week Table
- Week Table—Time Setting
- Holiday Table
- Numbering Plan—Main
- operator call
- tie line access
- group call pickup
- directed call pickup
- automatic callback busy cancel
- account code entry
- external feature access
- Numbering Plan—Quick Dial
- phone number
- Numbering Plan—B/NA DND Call Feature
- Class of Service—COS Settings
- trs level for system speed dialing
- account code mode
- dnd override
- executive busy override deny
- door unlock
- Class of Service—External Call Block
- Class of Service—Internal Call Block
- Ring Tone Patterns—Call from CO
- Ring Tone Patterns—Call from Doorphone
- Ring Tone Patterns—Call from Others
- System Options
- Extension CID Settings
- Audio Gain—Paging/MOH
- Audio Gain—Card
- Group
- Trunk Group—TRG Settings
- tone detection
- host pbx access code
- Trunk Group—Local Access Priority
- Caller ID Modification
- Dialing Plan
- Dialing Plan—Auto Assign
- Extension Group
- Call Pickup Group
- Call Pickup Group—All Setting
- Paging Group
- Paging Group—All Setting
- Paging Group—External Pager
- Incoming Call Distribution Group—Group Settings
- queuing time table
- Incoming Call Distribution Group—Group Settings—Member List
- delayed ring
- Incoming Call Distribution Group—Queuing Time Table
- Incoming Call Distribution Group—Miscellaneous
- Extension Hunting Group
- Extension Hunting Group—Member List
- VM(DPT) Group—System Settings
- VM(DPT) Group—Unit Settings
- VM(DPT) Group—Unit Settings—Member List
- VM(DTMF) Group—System Settings
- VM(DTMF) Group—Group Settings
- VM(DTMF) Group—Group Settings—Member List
- PS Ring Group
- PS Ring Group—Member List
- Conference Group (KX-TDA50 only)
- Conference Group—Member List (KX-TDA50 only)
- Extension
- Wired Extension—Extension Settings
- key pad tone
- paging deny
- extension caller id
- Wired Extension—Extension Settings—CLIP Generate
- Wired Extension—FWD/DND
- Wired Extension—Speed Dial
- Wired Extension—Flexible Button
- Wired Extension—Flexible Button—Flexible button data copy
- Wired Extension—PF Button
- Wired Extension—NDSS Link Data - Send
- Wired Extension—Simplified Voice Message
- Portable Station—Extension Settings
- Portable Station—Extension Settings—CLIP Generate
- Portable Station—FWD/DND
- Portable Station—Flexible Button
- Portable Station—Flexible Button—Flexible button data copy
- Portable Station—NDSS Link Data - Send
- Portable Station—Simplified Voice Message
- Portable Station—Single CO Appearance (KX-TDA50 only)
- DSS Console
- DSS Console—DSS key data copy
- Optional Device
- Doorphone
- External Pager
- Voice Message—DISA System
- Voice Message—DISA Message
- Voice Message—SVM
- remote access
- External Relay
- External Sensor
- Feature
- System Speed Dial
- Hotel
- Verification Code
- Second Dial Tone
- Absent Message
- Tenant
- ars mode
- Denied Code
- Exception Code
- Special Carrier
- Emergency Dial
- Miscellaneous
- System Setting
- Leading Number
- Routing Plan Time
- Routing Plan Time—Time Setting
- Routing Plan Priority
- Carrier
- Leading Number Exception
- Authorization Code for TRG
- TIE Table
- trunk group
- Network Data Transmission
- Network Operator (VoIP)
- NDSS Key Table
- CO & Incoming Call
- CO Line Settings
- trunk group number
- DIL Table & Port Settings
- DID Table
- DID Table—Automatic Registration
- DID Table—Name Generate
- Maintenance
- Main
- smdr options
- PT Programming Access
- Power Failure Transfer (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Appendix
- Revision History
- KX-TDA100/KX-TDA200 PMPR Software File Version 5.0xxx
- KX-TDA50 PSMPR Software File Version 4.0xxx
- KX-TDA50 PSMPR Software File Version 5.0xxx
- KX-TDA50 PSMPR Software File Version 6.0xxx
- Feature Programming References
- Document Version
- call hold
- call park
- call transfer
- call waiting tone
- co line access
- co line call limitation
- data line security
- dial mode selection
- display information
- emergency call
- extension port configuration
- flexible buttons
- floating extension
- group features
- headset operation
- icd group features
- idle extension hunting
- internal call block
- led indication
- manager features
- operator features
- pause insertion
- power failure transfer
- quick dialing
- room status control
- t1 line service
- tenant service
- time service
- verification code entry
- voice mail dtmf integration
- walking cos
HYBRID IP-PBX KX-TDA100
Table of contents
- installation manual
- system components
- important notice
- important safety instructions
- save these instructions
- Table Of Contents
- Table Of Contents
- Table Of Contents
- System Outline
- System Highlights
- hospitality features
- Basic System Construction
- System Connection Diagram
- Optional Equipment
- Specifications
- Characteristics
- System Capacity
- Installation
- Before Installation
- Installation of the Hybrid IP-PBX
- Names and Locations
- Opening/Closing the Front Cover
- closing the front cover
- Installing/Replacing the Power Supply Unit
- replacing the power supply unit
- Frame Earth Connection
- Backup Battery Connection
- connecting backup batteries
- Installing/Removing the Optional Service Cards
- Types of Connectors
- Attaching a Ferrite Core
- Fastening Amphenol Connector
- Wall Mounting (KX-TDA200)
- Wall Mounting (KX-TDA100)
- Floor Standing (KX-TDA200 Only)
- Surge Protector Installation
- Information about the Main Processing Card
- MEC Card (KX-TDA0105)
- RMT Card (KX-TDA0196)
- Information about the Trunk Cards
- DID8 Card (KX-TDA0182)
- CID/PAY8 Card (KX-TDA0189)
- CID8 Card (KX-TDA0193)
- E&M8 Card (KX-TDA0184)
- T1 Card (KX-TDA0187)
- E1 Card (KX-TDA0188)
- BRI4 Card (KX-TDA0284) and BRI8 Card (KX-TDA0288)
- PRI30 Card (KX-TDA0290CE/CJ)
- PRI23 Card (KX-TDA0290)
- IP-GW4 Card (KX-TDA0480)
- IP-GW4E Card (KX-TDA0484)
- IP-GW16 Card (KX-TDA0490)
- Information about the Extension Cards
- DHLC8 Card (KX-TDA0170)
- DLC8 Card (KX-TDA0171)
- DLC16 Card (KX-TDA0172)
- SLC8 Card (KX-TDA0173)
- EXT-CID Card (KX-TDA0168)
- SLC16 Card (KX-TDA0174), MSLC16 Card (KX-TDA0175), and CSLC16 Card (KX TDA0177)
- IP-EXT16 Card (KX-TDA0470)
- Information about the Other Cards
- DPH4 Card (KX-TDA0161)
- DPH2 Card (KX-TDA0162)
- EIO4 Card (KX-TDA0164)
- ECHO16 Card (KX-TDA0166)
- MSG4 Card (KX-TDA0191)
- CTI-LINK Card (KX-TDA0410)
- Connection of Extensions
- Parallel Connection of the Extensions
- Digital EXtra Device Port (Digital XDP) Connection
- First Party Call Control CTI Connection
- Connection of DECT Portable Stations
- Procedure Overview
- Site Planning
- Before Site Survey
- Site Survey Using the KX-TCA255/KX-TD7590
- After Site Survey
- Connecting a Cell Station to the Hybrid IP-PBX
- Wall Mounting
- Connection of 2.4 GHz Portable Stations
- Site Survey
- Connection of Doorphones, Door Openers, External Sensors, and External Relays
- Connection of Peripherals
- Power Failure Connections
- Starting the Hybrid IP-PBX
- Guide for the KX-TDA Maintenance Console
- Overview
- Connection
- Installation of the KX-TDA Maintenance Console
- Troubleshooting
- Operation
- Using the Reset Button
- Troubleshooting by Error Log
- Appendix
- Revision History
- PMPR Software File Version 2.0xxx
- PMPR Software File Version 3.0xxx
- PMPR Software File Version 3.2xxx
- Index
HYBRID IP-PBX KX-TDA100
Table of contents
- feature highlights
- list of abbreviations
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Features and Configurations
- Absent Message
- Account Code Entry
- ARS (Automatic Route Selection)
- Automatic Callback Busy (Camp-on)
- Automatic Extension Release
- Automatic Fax Transfer
- Automatic Time Adjustment
- BGM (Background Music)
- Caller ID
- Call Hold
- Call Log, Incoming
- Call Monitor
- Call Park
- Call Pickup
- Call Splitting
- Call Transfer
- CALL WAITING FEATURES
- Call Waiting Tone
- CELLULAR PHONE FEATURES
- CLI (Calling Line Identification) Distribution
- CLIP (Calling Line Identification Presentation)
- CO Line Access
- CO Line Call Limitation
- Conference
- Confirmation Tone
- Consultation Hold
- CPC (Calling Party Control) Signal Detection
- CTI (Computer Telephony Integration)
- Data Line Security
- Dial Tone
- Dial Tone Transfer
- DID (Direct Inward Dialing)
- DIL (Direct In Line)
- DISA (Direct Inward System Access)
- Display Information
- DND (Do Not Disturb)
- Door Open
- Doorphone Call
- EFA (External Feature Access)
- Emergency Call
- Extension Dial Lock
- Extension Feature Clear
- Extension PIN (Personal Identification Number)
- Extension Port Configuration
- External Relay
- External Sensor
- Fixed Buttons
- Flash/Recall/Terminate
- Flexible Buttons
- Flexible Numbering/Fixed Numbering
- Floating Extension
- FWD (Call Forwarding)
- FWD/DND Button, Group FWD Button
- GROUP FEATURES
- Hands-free Answerback
- Hands-free Operation
- HOSPITALITY FEATURES
- Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
- Hot Line
- ICD GROUP FEATURES
- ICD Group Features—Group Call Distribution
- ICD Group Features—Log-in/Log-out
- ICD Group Features—Outside Destinations
- ICD Group Features—Overflow
- ICD Group Features—Queuing
- ICD Group Features—Supervisory
- ICD Group Features—VIP Call
- Idle Extension Hunting
- INCOMING CALL FEATURES
- Intercept Routing
- Intercept Routing—No Destination
- Internal Call Block
- IP-PT (IP Proprietary Telephone)
- ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
- LED Indication
- Line Preference—Incoming
- Line Preference—Outgoing
- Local Alarm Information
- Manager Features
- MEMORY DIALING FEATURES
- Message Waiting
- Music on Hold
- Mute
- Off-hook Monitor
- OHCA (Off-hook Call Announcement)
- One-touch Dialing
- Operator Features
- Paging
- Paralleled Telephone
- Password Security
- Pause Insertion
- PC Console/PC Phone
- PC Programming
- PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension
- Power Failure Restart
- Power Failure Transfer
- Predialing
- Printing Message
- PRIVATE NETWORK FEATURES
- Private Network Features—Centralized Voice Mail
- Private Network Features—NDSS (Network Direct Station Selection)
- Private Network Features—Network ICD Group
- Private Network Features—PS Roaming by Network ICD Group
- PRIVATE NETWORK FEATURES—QSIG
- Private Network Features—QSIG—CCBS (Completion of Calls to Busy Subscriber)
- Private Network Features—QSIG—CF (Call Forwarding)
- Private Network Features—QSIG—CT (Call Transfer)
- Private Network Features—VoIP (Voice over Internet Protocol)
- PS Connection
- PS Directory
- PS Feature Buttons
- PT Programming
- Quick Dialing
- Quick Setup
- Redial, Last Number
- Ring Tone Pattern Selection
- Room Status Control
- SMDR (Station Message Detail Recording)
- Special Carrier Access Code
- Speed Dialing, Personal
- Speed Dialing, System
- SVM (Simplified Voice Message)
- T1 Line Service
- TAFAS (Trunk Answer From Any Station)
- Tenant Service
- Timed Reminder
- Time Service
- TRS (Toll Restriction)
- Upgrading the Software
- Verification Code Entry
- Virtual PS
- Voice Mail (VM) Group
- Voice Mail DPT (Digital) Integration
- Voice Mail DTMF Integration
- Walking COS
- Walking Extension
- Whisper OHCA
- Wireless XDP Parallel Mode
- Appendix
- Capacity of System Resources
- voice message
- Exclusive Features Table
- Tones/Ring Tones
- Revision History
- KX-TDA100/KX-TDA200 PMPR Software File Version 2.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.2xxx
- KX-TDA50 PSMPR Software File Version 1.1xxx
- KX-TDA50 PSMPR Software File Version 3.0xxx
- KX-TDA50 PSMPR Software File Version 4.0xxx
- Index
HYBRID IP-PBX KX-TDA100
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Overview
- password security
- entering characters
- PT Programming
- programming instructions
- maximum values
- basic programming
- System Speed Dialing Number
- system management programming
- Time Service Switching Mode
- Manager Password
- timer programming
- Call Duration Count Starting Time for LCOT
- TRS Exception Code
- ARS Routing Plan Time Table
- co line programming
- LCOT CO Line Number Reference
- LCOT Flash/Recall Time
- Trunk Group Intercept Destination
- cos programming
- CO Line Call Duration Limitation
- TRS Level for System Speed Dialing
- extension programming
- Call Forwarding—No Answer Time
- Incoming Call Distribution Group Distribution Method
- Queuing Hurry-up Level
- External Pagers of a Paging Group
- Idle Extension Hunting Group Member
- Personal Identification Number (PIN) for PS Registration
- Music for Transfer
- Outgoing Message (OGM) Name
- External Modem Control
- card programming
- OPB3 Option Card Deletion (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Appendix
- feature programming references
HYBRID IP-PBX KX-TDA100
Table of contents
- list of abbreviations
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Call Handling Features
- incoming call features
- Direct In Line (DIL)
- Direct Inward Dialling (DID)/Direct Dialling In (DDI)
- Multiple Subscriber Number (MSN) Ringing Service
- Calling Line Identification (CLI) Distribution
- intercept routing
- Intercept Routing—No Destination
- Internal Call Features
- internal call block
- Incoming Call Indication Features
- ring tone pattern selection
- call waiting
- idle extension hunting
- Incoming Call Distribution Group Features
- Group Call Distribution
- Outside Destinations in Incoming Call Distribution Group
- Queuing Feature
- VIP Call
- Overflow Feature
- Log-in/Log-out
- Supervisory Feature
- Call Forwarding (FWD)/Do Not Disturb (DND) Features
- Call Forwarding (FWD)
- Do Not Disturb (DND)
- FWD/DND Button, Group FWD Button
- Answering Features
- Line Preference—Incoming
- call pickup
- Hands-free Answerback
- Making Call Features
- automatic extension release
- intercom call
- Trunk Call Features
- emergency call
- account code entry
- Dial Type Selection
- Reverse Circuit
- Trunk Busy Out
- pause insertion
- Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
- special carrier access code
- Seizing a Line Features
- Line Preference—Outgoing
- Trunk Access
- Memory Dialling Features
- One-touch Dialling
- KX-T7710 One-touch Dialling
- last number redial
- Speed Dialling—Personal/System
- Quick Dialling
- hot line
- Busy Line/Busy Party Features
- executive busy override
- call monitor
- Second Call Notification to Busy Extension
- call waiting tone
- Off-hook Call Announcement (OHCA)
- whisper ohca
- Toll Restriction (TRS)/Call Barring (Barring) Features
- budget management
- extension dial lock
- dial tone transfer
- walking cos
- verification code entry
- Automatic Route Selection (ARS) Features
- Conversation Features
- Off-hook Monitor
- Mute
- headset operation
- data line security
- Flash/Recall/Terminate
- External Feature Access (EFA)
- Trunk Call Limitation
- Parallelled Telephone
- Calling Party Control (CPC) Signal Detection
- call transfer
- call hold
- call park
- call splitting
- music on hold
- Conference Features
- Conference
- privacy release
- Paging Features
- Broadcasting Features
- doorphone call
- door open
- Trunk Answer From Any Station (TAFAS)
- Background Music (BGM)
- Outgoing Message (OGM)
- Direct Inward System Access (DISA)
- Automatic Fax Transfer
- Built-in Simplified Voice Message (SVM)
- external sensor
- External Relay Control
- Caller ID Features
- Incoming Call Log
- message waiting
- absent message
- fixed buttons
- flexible buttons
- led indication
- display information
- Integrated Services Digital Network (ISDN) Service Features
- Calling/Connected Line Identification Presentation (CLIP/COLP)
- Advice of Charge (AOC)
- Call Forwarding (CF)—by ISDN (P-MP)
- Call Forwarding (CF)—by ISDN (P-P)
- Call Hold (HOLD)—by ISDN
- Call Transfer (CT)—by ISDN
- Three-party Conference (3PTY)—by ISDN
- Malicious Call Identification (MCID)
- Completion of Calls to Busy Subscriber (CCBS)
- ISDN Extension
- ISDN Service Access by Keypad Protocol
- E1 Line Service Features
- t1 line service
- voice mail features
- voice mail dtmf integration
- Voice Mail DPT (Digital) Integration
- Portable Station (PS) Features
- ps ring group
- PS Directory
- ps feature buttons
- Wireless XDP Parallel Mode
- Virtual PS
- Administrative Information Features
- Printing Message
- Call Charge Services
- hospitality features
- room status control
- Call Billing for Guest Room
- Extension Controlling Features
- extension feature clear
- walking extension
- timed reminder
- dial tone
- confirmation tone
- Networking Features
- Voice over Internet Protocol (VoIP) Network
- Virtual Private Network (VPN)
- QSIG Standard Features
- Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name Identification Presentation (CNIP/CONP)—by QSIG
- Call Forwarding (CF)—by QSIG
- Call Transfer (CT)—by QSIG
- Completion of Calls to Busy Subscriber (CCBS)—by QSIG
- QSIG Enhanced Features
- Centralised Voice Mail
- Network ICD Group
- PS Roaming by Network ICD Group
- IP Proprietary Telephone (IP-PT) Features
- Computer Telephony Integration (CTI) Features
- PC Phone/PC Console
- cellular phone features
- System Configuration and Administration Features
- extension port configuration
- System Configuration—Software
- Group
- tenant service
- time service
- operator features
- manager features
- System Data Control
- PT Programming
- password security
- quick setup
- Automatic Setup
- Flexible Numbering/Fixed Numbering
- floating extension
- software upgrading
- power failure transfer
- power failure restart
- local alarm information
- Appendix
- capacity of system resources
- Exclusive Features Table
- Tones/Ring Tones
- Revision History
- KX-TDA100/KX-TDA200 PMPR Software File Version 2.0xxx
- KX-TDA100/KX-TDA200/KX-TDA600 PMPR/PLMPR Software File Version 3.xxxx
- KX-TDA30 PSMPR Software File Version 1.1xxx
- KX-TDA30 PSMPR Software File Version 2.0xxx
- KX-TDA30 PSMPR Software File Version 2.2xxx
- KX-TDA30 PSMPR Software File Version 3.xxxx
- Index
HYBRID IP-PBX KX-TDA100
Table of contents
- safety notices
- list of abbreviations
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Call Handling Features
- incoming call features
- Direct In Line (DIL)
- Direct Inward Dialling (DID)/Direct Dialling In (DDI)
- Multiple Subscriber Number (MSN) Ringing Service
- Calling Line Identification (CLI) Distribution
- intercept routing
- Intercept Routing—No Destination
- Internal Call Features
- internal call block
- Incoming Call Indication Features
- ring tone pattern selection
- call waiting
- idle extension hunting
- Incoming Call Distribution Group Features
- Group Call Distribution
- Outside Destinations in Incoming Call Distribution Group
- Queuing Feature
- VIP Call
- Overflow Feature
- Log-in/Log-out
- Supervisory Feature
- Call Forwarding (FWD)/Do Not Disturb (DND) Features
- Call Forwarding (FWD)
- Do Not Disturb (DND)
- FWD/DND Button, Group FWD Button
- Answering Features
- Line Preference—Incoming
- call pickup
- Hands-free Answerback
- Making Call Features
- automatic extension release
- intercom call
- Trunk Call Features
- emergency call
- account code entry
- Dial Type Selection
- Reverse Circuit
- Trunk Busy Out
- pause insertion
- special carrier access code
- Seizing a Line Features
- Line Preference—Outgoing
- Trunk Access
- Memory Dialling Features
- One-touch Dialling
- KX-T7710 One-touch Dialling
- last number redial
- Speed Dialling—Personal/System
- Quick Dialling
- hot line
- Primary Directory Number (PDN)/Secondary Directory Number (SDN Features
- Busy Line/Busy Party Features
- executive busy override
- call monitor
- Second Call Notification to Busy Extension
- call waiting tone
- Off-hook Call Announcement (OHCA)
- whisper ohca
- Toll Restriction (TRS)/Call Barring (Barring) Features
- budget management
- extension dial lock
- dial tone transfer
- walking cos
- verification code entry
- Automatic Route Selection (ARS) Features
- Conversation Features
- Off-hook Monitor
- Mute
- headset operation
- data line security
- Flash/Recall/Terminate
- External Feature Access (EFA)
- Trunk Call Limitation
- Parallelled Telephone
- Calling Party Control (CPC) Signal Detection
- call transfer
- call hold
- call park
- call splitting
- music on hold
- Conference Features
- Conference
- privacy release
- Paging Features
- Broadcasting Features
- doorphone call
- door open
- Trunk Answer From Any Station (TAFAS)
- Background Music (BGM)
- Outgoing Message (OGM)
- Direct Inward System Access (DISA)
- Automatic Fax Transfer
- Built-in Simplified Voice Message (SVM)
- message notification
- external sensor
- External Relay Control
- Caller ID Features
- Incoming Call Log
- message waiting
- absent message
- fixed buttons
- dss console
- flexible buttons
- led indication
- display information
- Integrated Services Digital Network (ISDN) Service Features
- Calling/Connected Line Identification Presentation (CLIP/COLP)
- Advice of Charge (AOC)
- Call Forwarding (CF)—by ISDN (P-MP)
- Call Forwarding (CF)—by ISDN (P-P)
- Call Hold (HOLD)—by ISDN
- Call Transfer (CT)—by ISDN
- Three-party Conference (3PTY)—by ISDN
- Malicious Call Identification (MCID)
- Completion of Calls to Busy Subscriber (CCBS)
- ISDN Extension
- ISDN Service Access by Keypad Protocol
- E1 Line Service Features
- t1 line service
- voice mail features
- voice mail dtmf integration
- Voice Mail DPT (Digital) Integration
- Portable Station (PS) Features
- ps ring group
- PS Directory
- ps feature buttons
- Wireless XDP Parallel Mode
- Virtual PS
- Administrative Information Features
- Printing Message
- Call Charge Services
- Hospitality Features
- room status control
- Call Billing for Guest Room
- Extension Controlling Features
- extension feature clear
- walking extension
- timed reminder
- dial tone
- confirmation tone
- Networking Features
- Voice over Internet Protocol (VoIP) Network
- Virtual Private Network (VPN)
- QSIG Standard Features
- Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Name Identification Presentation (CNIP/CONP)—by QSIG
- Call Forwarding (CF)—by QSIG
- Call Transfer (CT)—by QSIG
- Completion of Calls to Busy Subscriber (CCBS)—by QSIG
- QSIG Enhanced Features
- Centralised Voice Mail
- Network ICD Group
- PS Roaming by Network ICD Group
- IP Proprietary Telephone (IP-PT) Features
- Computer Telephony Integration (CTI) Features
- PC Phone/PC Console
- cellular phone features
- System Configuration and Administration Features
- extension port configuration
- System Configuration—Software
- call pickup group
- tenant service
- time service
- operator features
- manager features
- System Data Control
- PT Programming
- password security
- quick setup
- Automatic Setup
- Flexible Numbering/Fixed Numbering
- floating extension
- software upgrading
- power failure transfer
- power failure restart
- local alarm information
- Appendix
- capacity of system resources
- Exclusive Features Table
- Tones/Ring Tones
- Revision History
- KX-TDA600 PLMPR Software File Version 5.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 1.1xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 2.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.2xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 5.0xxx
- KX-TDA30 PSMPR Software File Version 1.1xxx
- KX-TDA30 PSMPR Software File Version 2.0xxx
- KX-TDA30 PSMPR Software File Version 2.2xxx
- KX-TDA30 PSMPR Software File Version 3.0xxx
- KX-TDA30 PSMPR Software File Version 4.0xxx
- KX-TDA30 PSMPR Software File Version 5.0xxx
- Index
HYBRID IP-PBX KX-TDA100
Table of contents
- getting started
- Table Of Contents
- Before Installation
- Safety Notices
- System Connection Diagram
- Unpacking
- Installation
- Opening/Closing the Front Cover
- Inserting the SD Memory Card to the MPR Card
- Installing the Option Units
- Installing the Trunk Cards
- Installing the Extension Cards (DLC8/DLC16/DHLC8/MSLC16/SLC8/SLC16 CSLC16)
- Frame Earth Connection
- Starting the PBX
- Customising the PBX
- Connecting the PC
- Programming the PBX
- Confirming the Connection
- Making Calls
HYBRID IP-PBX KX-TDA100
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Overview
- Introduction
- Entering Characters
- PC Programming
- installing the maintenance console
- Password Security
- Maintenance Console Operating Instructions
- Access Levels
- Software Interface
- Card Status
- Display Options
- Extension Number Setting
- Start Menu
- Start Menu—Open
- Start Menu—Connect—RS-232C
- Start Menu—Connect—USB
- Start Menu—Connect—LAN
- Start Menu—Connect—Modem
- Start Menu—Connect—ISDN Remote
- Start Menu—Connect—Profile Setup
- File
- File—Save
- File—Save As
- File—Exit
- Disconnect
- Tool
- Tool—BRI Automatic Configuration
- Tool—NDSS Link Data Clear
- Tool—DXDP All OUS
- Tool—Simplified Voice Message—Delete All Recording
- Tool—Simplified Voice Message—Check Current Usage
- Tool—Extension List View
- Tool—Import
- Tool—Export
- Tool—Screen Customize—User Level/Administrator Level
- Utility
- Utility—File Transfer PC to PBX (SD Card)
- Utility—File Transfer PBX (SD Card) to PC
- Utility—SD Card File View and Load
- Utility—SD Card File Delete
- Utility—Message File Transfer PC to PBX
- Utility—Message File Transfer PBX to PC
- Utility—Error Log
- Utility—T1/E1 Signalling Bit Monitor (for KX-TDA100/KX-TDA200/KX-TDA600) / E1 Signalling Bit Monitor (for KX-TDA30)
- Utility—T1/E1 Line Trace (for KX-TDA100/KX-TDA200/KX-TDA600) / E1 Line Trace (for KX-TDA30)
- Utility—ISDN/QSIG Protocol Trace
- Utility—Digital Trunk Error Report
- Utility—IP Extension Statistical Information
- Utility—CS Information
- Utility—PS Information
- Utility—Timed Update
- Utility—System Reset—Reset by the Command
- Utility—Flash ROM ID Information
- Help
- Configuration
- Slot—Summary
- Slot—Card Property - MPR
- Slot—Card Property - Extension Type
- Slot—Port Property - Extension Port
- Slot—Port Property - Extension Port—Connection Command
- Slot—Port Property - Extension Port—Port Type View
- Slot—Port Property - CSI/F Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - CSI/F Port—Connection Command (KX-TDA100/KX-TDA200 KX-TDA600 only)
- Slot—Card Property - LCO type
- Slot—Port Property - LCO Port
- busy out status
- Slot—Port Property - LCO Port—Connection Command
- Slot—Card Property - BRI type/PRI type
- Slot—Port Property - BRI Port
- Slot—Port Property - BRI Port—Connection Command
- Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- network configuration
- Slot—Port Property - PRI Port—Connection Command (KX-TDA100/KX-TDA200/KX TDA600 only)
- Slot—Card Property - T1 type (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - T1 Port—Connection Command (KX-TDA100/KX-TDA200/KX TDA600 only)
- Slot—Card Property - E1 type
- Slot—Card Property - E1 type—Line Signal Setting
- Slot—Card Property - E1 type—MFC-R2 Setting 1
- Slot—Card Property - E1 type—MFC-R2 Setting 2
- Slot—Port Property - E1 Port
- Slot—Port Property - E1 Port—Connection Command
- Slot—Card Property - EM type (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - EM Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Port Property - EM Port—Connection Command (KX-TDA100/KX-TDA200/KX TDA600 only)
- Slot—Card Property - DID type
- Slot—Port Property - DID Port
- Slot—Port Property - DID Port—Connection Command
- Slot—Card Property - IP Gateway
- Slot—Port Property - IP-GW Port
- Slot—Port Property - IP-GW Port—Connection Command
- Slot—Card Property - IP Extension
- Slot—Card Property - IP Extension—Common Settings
- Slot—Port Property - IP-Extension Port
- Slot—Card Property - SIP Gateway (KX-TDA30 only)
- Slot—Port Property - SIP-GW Port (KX-TDA30 only)
- Slot—Card Property - OPB3 (KX-TDA100/KX-TDA200/KX-TDA600 only)
- port status
- device type
- Slot—Card Property - OPB3—Card Command (KX-TDA100/KX-TDA200/KX TDA600 only)
- Slot—OPB3 Option Card Setup (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Card Property - CTILINK (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—Card Property - DPH type (KX-TDA30 only)
- Slot—Card Property - DPH type—Connection Command (KX-TDA30 only)
- Portable Station
- Option
- Clock Priority
- System
- Date & Time/Daylight Saving—Date & Time Setting
- Operator & BGM
- Timers & Counters
- Week Table
- Week Table—Time Setting
- Holiday Table
- Numbering Plan—Main
- trunk group access
- doorphone call
- single co line access
- directed call pickup
- group paging answer
- account code entry
- door open
- walking extension
- manual call waiting for extension call
- incoming call queue monitor
- extension feature clear
- busy out cancel
- simplified voice message access
- Numbering Plan—Quick Dial
- Numbering Plan—B/NA DND Call Feature
- automatic callback busy
- Class of Service—COS Settings
- transfer to co
- account code mode
- executive busy override
- executive busy override deny
- programming mode level
- door unlock
- Class of Service—External Call Block
- Class of Service—Internal Call Block
- Ring Tone Patterns—Call from CO
- Ring Tone Patterns—Call from Doorphone
- Ring Tone Patterns—Call from Others
- System Options
- Extension CID Settings
- Audio Gain—Paging/MOH
- Audio Gain—Card
- Group
- line hunting order
- host pbx access code
- Trunk Group—Local Access Priority
- Caller ID Modification
- Dialling Plan
- Dialling Plan—Auto Assign
- Trunk Group—Charge Rate
- User Group
- Call Pickup Group
- Call Pickup Group—All Setting
- Paging Group
- Paging Group—All Setting
- Paging Group—External Pager
- Incoming Call Distribution Group—Group Settings
- overflow queuing busy
- overflow no answer
- queuing time table
- extension no answer redirection time
- Incoming Call Distribution Group—Member List
- delayed ring
- Incoming Call Distribution Group—Queuing Time Table
- Incoming Call Distribution Group—Miscellaneous
- Extension Hunting Group
- Extension Hunting Group—Member List
- VM(DPT) Group—System Settings
- VM(DPT) Group—Unit Settings
- VM(DPT) Group—Unit Settings—Member List
- VM(DTMF) Group—System Settings
- VM(DTMF) Group—Group Settings
- VM(DTMF) Group—Group Settings—Member List
- PS Ring Group
- PS Ring Group—Member List
- Broadcasting Group
- Broadcasting Group—Member List
- Extension
- paging deny
- Wired Extension—Extension Settings—CLIP Generate
- Wired Extension—FWD/DND
- Wired Extension—Speed Dial
- Wired Extension—Flexible Button
- Wired Extension—Flexible Button—Flexible button data copy
- Wired Extension—PF Button
- Wired Extension—NDSS Link Data - Send
- Wired Extension—Simplified Voice Message
- Portable Station—Extension Settings
- svm lock
- Portable Station—Extension Settings—CLIP Generate
- Portable Station—FWD / DND
- Portable Station—Flexible Button
- Portable Station—Flexible Button—Flexible button data copy
- Portable Station—NDSS Link Data - Send
- Portable Station—Simplified Voice Message
- DSS Console
- DSS Console—DSS key data copy
- Optional Device
- External Pager
- Voice Message—DISA System
- Voice Message—DISA Message
- Voice Message—SVM
- remote access
- External Relay
- External Sensor
- Feature
- Hotel & Charge
- Verification Code
- itemised billing code for ars
- budget management
- Second Dial Tone
- Absent Message
- Tenant
- ars mode
- Denied Code
- Exception Code
- Special Carrier
- Emergency Dial
- Miscellaneous
- System Setting
- Leading Number
- Routing Plan Time
- Routing Plan Time—Time Setting
- Routing Plan Priority
- Carrier
- Leading Number Exception
- Authorisation Code for TRG
- Private Network
- trunk group
- Network Data Transmission
- Network Operator (VoIP)
- NDSS Key Table
- CO & Incoming Call
- trunk group number
- DIL Table & Port Settings
- DDI / DID Table
- DDI/DID Table—Automatic Registration
- DDI/DID Table—Name Generate
- MSN Table
- Maintenance
- PT Programming Access
- Power Failure Transfer (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Appendix
- Revision History
- KX-TDA600 PLMPR Software File Version 5.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.2xxx
- KX-TDA30 PSMPR Software File Version 4.0xxx
- Feature Programming References
HYBRID IP-PBX KX-TDA100
Table of contents
- feature manual
- feature highlights
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Features and Configurations
- Absent Message
- Account Code Entry
- ARS (Automatic Route Selection)
- Automatic Callback Busy (Camp-on)
- Automatic Extension Release
- Automatic Fax Transfer
- Automatic Time Adjustment
- BGM (Background Music)
- Caller ID
- Call Hold
- Call Log, Incoming
- Call Monitor
- Call Park
- Call Pickup
- Call Splitting
- Call Transfer
- CALL WAITING FEATURES
- Call Waiting Tone
- CELLULAR PHONE FEATURES
- CLI (Calling Line Identification) Distribution
- CLIP (Calling Line Identification Presentation)
- CO Line Access
- CO Line Call Limitation
- Conference
- Confirmation Tone
- Consultation Hold
- CPC (Calling Party Control) Signal Detection
- CTI (Computer Telephony Integration)
- Data Line Security
- Dial Tone
- Dial Tone Transfer
- DID (Direct Inward Dialing)
- DIL (Direct In Line)
- DISA (Direct Inward System Access)
- Display Information
- DND (Do Not Disturb)
- Door Open
- Doorphone Call
- EFA (External Feature Access)
- Emergency Call
- Extension Dial Lock
- Extension Feature Clear
- Extension PIN (Personal Identification Number)
- Extension Port Configuration
- External Relay
- External Sensor
- Fixed Buttons
- Flash/Recall/Terminate
- Flexible Buttons
- Flexible Numbering/Fixed Numbering
- Floating Extension
- FWD (Call Forwarding)
- FWD/DND Button, Group FWD Button
- GROUP FEATURES
- Hands-free Answerback
- Hands-free Operation
- HOSPITALITY FEATURES
- Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
- Hot Line
- ICD GROUP FEATURES
- ICD Group Features—Group Call Distribution
- ICD Group Features—Log-in/Log-out
- ICD Group Features—Outside Destinations
- ICD Group Features—Overflow
- ICD Group Features—Queuing
- ICD Group Features—Supervisory
- ICD Group Features—VIP Call
- Idle Extension Hunting
- INCOMING CALL FEATURES
- Intercept Routing
- Intercept Routing—No Destination
- Intercom Call
- Internal Call Block
- IP-PT (IP Proprietary Telephone)
- ISDN (INTEGRATED SERVICES DIGITAL NETWORK) FEATURES
- LED Indication
- Line Preference—Incoming
- Line Preference—Outgoing
- Local Alarm Information
- Manager Features
- MEMORY DIALING FEATURES
- Message Waiting
- Music on Hold
- Mute
- Off-hook Monitor
- OHCA (Off-hook Call Announcement)
- One-touch Dialing
- Operator Features
- Paging
- Paralleled Telephone
- Password Security
- Pause Insertion
- PC Console/PC Phone
- PC Programming
- PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension
- Power Failure Restart
- Predialing
- Printing Message
- Privacy Release
- Private Network Features—Centralized Voice Mail
- Private Network Features—NDSS (Network Direct Station Selection)
- Private Network Features—Network ICD Group
- Private Network Features—PS Roaming by Network ICD Group
- PRIVATE NETWORK FEATURES—QSIG
- Private Network Features—QSIG—CCBS (Completion of Calls to Busy Subscriber)
- Private Network Features—QSIG—CF (Call Forwarding)
- Private Network Features—QSIG—CT (Call Transfer)
- Private Network Features—VoIP (Voice over Internet Protocol)
- PS Connection
- PS Directory
- PS Feature Buttons
- PT Programming
- Quick Dialing
- Quick Setup
- Redial, Last Number
- Ring Tone Pattern Selection
- Room Status Control
- SMDR (Station Message Detail Recording)
- Special Carrier Access Code
- Speed Dialing, Personal
- Speed Dialing, System
- SVM (Simplified Voice Message)
- T1 Line Service
- TAFAS (Trunk Answer From Any Station)
- Tenant Service
- Timed Reminder
- Time Service
- TRS (Toll Restriction)
- Upgrading the Software
- Verification Code Entry
- Virtual PS
- Voice Mail (VM) Group
- Voice Mail DPT (Digital) Integration
- Voice Mail DTMF Integration
- Walking COS
- Walking Extension
- Whisper OHCA
- Wireless XDP Parallel Mode
- Appendix
- Capacity of System Resources
- Exclusive Features Table
- Tones/Ring Tones
- Revision History
- KX-TDA100/KX-TDA200 PMPR Software File Version 2.0xxx
- KX-TDA100/KX-TDA200 PMPR Software File Version 3.0xxx
- KX-TDA50 PSMPR Software File Version 1.1xxx
- KX-TDA50 PSMPR Software File Version 3.0xxx
- Index
HYBRID IP-PBX KX-TDA100
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Overview
- Introduction
- PC Programming
- Password Security
- KX-TDA Maintenance Console Operating Instructions
- Access Levels
- Software Interface
- Card Status
- Display Options
- File
- File—Close
- File—Exit
- Connect
- Connect—LAN (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Connect—Modem
- Connect—Disconnect
- Tool
- Tool—Import
- Tool—Export
- Tool—Screen Customize—User Level/Administrator Level
- Tool—Simplified Voice Message—Delete All Recordings (KX-TDA50 only)
- Tool—Profile Setup
- Utility
- Utility—File Transfer PC to PBX (SD Card)
- system data
- Utility—File Transfer PBX (SD Card) to PC
- Utility—SD Card File View and Load
- Utility—SD Card File Delete
- Utility—Message File Transfer PBX to PC
- Utility—T1 Signaling Bit Monitor (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Utility—ISDN/QSIG Protocol Trace
- Utility—IP Extension Statistical Information (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Utility—CS Information
- Utility—PS Information
- Utility—System Reset—Reset by the Command
- Utility—Flash ROM ID Information
- Help
- setting features
- Configuration
- Slot—Summary
- Slot—MPR Card Property
- Slot—Extension Card Property
- Slot—Extension Port
- Slot—Extension Port—Port Command
- Slot—Extension Port—Port Type View
- Slot—CSI/F Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—CSI/F Port—Port Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—LCO Card Property
- Slot—LCO Port
- dialing mode
- pulse speed
- Slot—LCO Port—Port Command
- Slot—PRI Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- status message
- network configuration
- network type
- Slot—PRI Port—Port Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—T1 Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—T1 Port—Channel Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—IP-GW Card Property
- Slot—IP-GW Port
- Slot—IP-GW Port —Port Command
- Slot—IP-Extension Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—IP-Extension Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
- ringing tone
- Slot—OPB (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—OPB Card Command (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—OPB3 Option Card Setup (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Slot—CTI-LINK Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
- subnet mask
- Slot—DPH Card Property (KX-TDA50 only)
- Slot—DPH Port Command (KX-TDA50 only)
- Portable Station
- personal identification number
- Option
- Clock Priority (KX-TDA100/KX-TDA200/KX-TDA600)
- System
- Date & Time/Daylight Saving—Date & Time Setting
- Operator & BGM
- Timers & Counters
- Week Table
- Holiday Table
- Numbering Plan—Main
- operator call
- tie line access
- doorphone call
- group call pickup
- automatic callback busy cancel
- account code entry
- door open
- external feature access
- walking extension
- printing message
- extension feature clear
- Numbering Plan—Quick Dial
- Numbering Plan—B/NA DND Call Feature
- Class of Service—COS Settings
- trs level for system speed dialing
- account code mode
- dnd override
- executive busy override deny
- door unlock
- Class of Service—External Call Block
- Ring Tone Patterns—Call from CO
- Ring Tone Patterns—Call from Doorphone
- System Options
- Extension CID Settings
- Audio Gain—Paging/MOH
- IP Extension Settings (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Group
- tone detection
- host pbx access code
- Trunk Group—Local Access Priority
- Call Pickup Group
- Call Pickup Group—All Setting
- Paging Group
- Paging Group—All Setting
- Paging Group—External Pager
- Incoming Call Distribution Group—Group Settings
- queuing time table
- Incoming Call Distribution Group—Queuing Time Table
- Incoming Call Distribution Group—Member
- delayed ring
- Extension Hunting Group
- hunting type
- Extension Hunting Group—Member List
- VM(DPT) Group—System Settings
- VM(DPT) Group—Unit Settings
- VM(DPT) Group—Unit Settings—Member List
- VM(DTMF) Group—System Settings
- VM(DTMF) Group—Group Settings
- VM(DTMF) Group—Group Settings—Member List
- PS Ring Group
- PS Ring Group—Member List
- Extension
- key pad tone
- paging deny
- Wired Extension—Extension Settings—CLIP Generate
- Wired Extension—FWD/DND
- Wired Extension—Speed Dial
- Wired Extension—Flexible Button
- Wired Extension—Flexible Button—Flexible Button Data Copy
- Wired Extension—NDSS Link Data - Send
- Wired Extension—Simplified Voice Message (KX-TDA50 only)
- Portable Station—Extension Settings
- Portable Station—Extension Settings—CLIP Generate
- Portable Station—FWD / DND
- Portable Station—Flexible Button
- Portable Station—Flexible Button—Flexible Button Data Copy
- Portable Station—Simplified Voice Message (KX-TDA50 only)
- DSS Console—Flexible Button
- DSS Console—Flexible Button—Flexible button Data Copy
- Optional Device
- External Pager
- Voice Message—DISA System
- Voice Message—DISA Message
- Voice Message—SVM (KX-TDA50 only)
- recording mode
- External Relay
- External Sensor
- Feature
- Caller ID Modification
- Verification Code
- Second Dial Tone
- Absent Message
- Tenant
- ars mode
- Dialing Plan
- Dialing Plan—Auto Assign
- Denied Code
- Special Carrier Code
- Emergency Dial
- System Settings
- Leading Number
- Routing Plan Time
- Routing Plan Priority
- Carrier
- Leading Number Exception
- Authorization Code for TRG
- Private Network
- trunk group
- Network Data Transmission
- Network Operator (VoIP)
- NDSS Key Table
- CO & Incoming Call
- DIL Table & Port Settings
- port setting
- DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)
- did name
- DID Table—Automatic Registration (KX-TDA100/KX-TDA200/KX-TDA600 only)
- DID Table—Name Generate (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Miscellaneous
- Maintenance
- smdr options
- PT Programming Access
- Power Failure Transfer (KX-TDA100/KX-TDA200/KX-TDA600 only)
- Appendix
- Feature Programming References
HYBRID IP-PBX KX-TDA100
Table of contents
- installation manual
- system components
- important safety instructions
- Table Of Contents
- Table Of Contents
- Table Of Contents
- System Outline
- System Highlights
- voice mail features
- Basic System Construction
- System Connection Diagram
- Optional Equipment
- Specifications
- Characteristics
- System Capacity
- Installation
- Before Installation
- Installation of the Hybrid IP-PBX
- Names and Locations
- Opening/Closing the Front Cover
- Installing/Replacing the Power Supply Unit
- Frame Ground Connection
- Installing/Removing the Optional Service Cards
- Types of Connectors
- Attaching a Ferrite Core
- Fastening Amphenol Connector
- Wall Mounting (KX-TDA200)
- Wall Mounting (KX-TDA100)
- Floor Standing (KX-TDA200 Only)
- Surge Protector Installation
- Information about the Main Processing Card
- MEC Card (KX-TDA0105)
- RMT Card (KX-TDA0196)
- Information about the CO Line Cards
- CID8 Card (KX-TDA0193)
- T1 Card (KX-TDA0187)
- PRI23 Card (KX-TDA0290)
- IP-GW4 Card (KX-TDA0480)
- IP-GW4E Card (KX-TDA0484)
- IP-GW16 Card (KX-TDA0490)
- Information about the Extension Cards
- DHLC8 Card (KX-TDA0170)
- DLC8 Card (KX-TDA0171)
- DLC16 Card (KX-TDA0172)
- SLC8 Card (KX-TDA0173)
- EXT-CID Card (KX-TDA0168)
- SLC16 Card (KX-TDA0174), MSLC16 Card (KX-TDA0175), and CSLC16 Card (KX TDA0177)
- IP-EXT16 Card (KX-TDA0470)
- Information about the Other Cards
- DPH4 Card (KX-TDA0161)
- EIO4 Card (KX-TDA0164)
- ECHO16 Card (KX-TDA0166)
- MSG4 Card (KX-TDA0191)
- CTI-LINK Card (KX-TDA0410)
- Connection of Extensions
- Parallel Connection of the Extensions
- Digital EXtra Device Port (Digital XDP) Connection
- First Party Call Control CTI Connection
- Connection of 2.4 GHz Portable Stations
- Procedure Overview
- Site Planning
- Before Site Survey
- Site Survey
- After Site Survey
- Connecting a Cell Station to the Hybrid IP-PBX
- Wall Mounting
- Connection of Doorphones, Door Openers, External Sensors, and External Relays
- Connection of Peripherals
- Power Failure Connections
- Starting the Hybrid IP-PBX
- Guide for the KX-TDA Maintenance Console
- Overview
- Connection
- Installation of the KX-TDA Maintenance Console
- Troubleshooting
- Operation
- Using the Reset Button
- Troubleshooting by Error Log
- Appendix
- Revision History
- PMPR Software File Version 2.0xxx
- PMPR Software File Version 3.0xxx
- PMPR Software File Version 3.2xxx
- Index
HYBRID IP-PBX KX-TDA100
Table of contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- programming instructions
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Call Handling Features
- incoming call features
- Direct In Line (DIL)
- Direct Inward Dialling (DID)/Direct Dialling Inward (DDI)
- Multiple Subscriber Number (MSN) Ringing Service
- Calling Line Identification (CLI) Distribution
- intercept routing
- Intercept Routing—No Destination
- Collect Call Block (only for Brazil)
- Internal Call Features—SUMMARY
- internal call block
- Incoming Call Indication Features—SUMMARY
- ring tone pattern selection
- call waiting
- idle extension hunting
- Incoming Call Distribution Group Features—SUMMARY
- Group Call Distribution
- Queuing Feature
- VIP Call
- Overflow Feature
- busy on busy
- Log-in/Log-out
- Supervisory Feature
- Call Forwarding (FWD)/Do Not Disturb (DND) Features
- Call Forwarding (FWD)
- Do Not Disturb (DND)
- Answering Features
- Line Preference—Incoming
- call pickup
- Hands-free Answerback
- Making Call Features
- automatic extension release
- Line Preference—Outgoing
- Automatic Callback Busy (Camp-On)
- Executive Busy Override
- intercom call
- Second Call Notification to Busy Extension—SUMMARY
- call waiting tone
- Off-Hook Call Announcement (OHCA)
- whisper ohca
- Trunk Access
- emergency call
- account code entry
- Dial Type Selection
- Dial Tone Detection
- pause insertion
- Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
- Special Carrier Access Code
- Memory Dialling Features
- One-touch Dialling
- last number redial
- Speed Dialling—Personal/System
- Quick Dialling
- hot line
- Toll Restriction (TRS)/Call Barring (Barring) Features
- budget management
- Extension Lock
- dial tone transfer
- Remote COS Access
- Verified Code Entry
- Automatic Route Selection (ARS) Features
- Conversation Features
- Off-Hook Monitor
- Mute
- headset operation
- data line security
- Flash/Recall/Terminate
- External Feature Access (EFA)
- Trunk Call Limitation
- Parallelled Telephone
- Calling Party Control (CPC) Signal Detection
- call transfer
- call hold
- call park
- call splitting
- music on hold
- Conference Features
- Conference
- privacy release
- paging group
- doorphone call
- door open
- Trunk Answer From Any Station (TAFAS)
- Background Music (BGM)
- Outgoing Message (OGM)
- Direct Inward System Access (DISA)
- Caller ID Features
- Incoming Call Log
- message waiting
- Absent Message
- fixed buttons
- flexible buttons
- led indication
- display information
- Integrated Services Digital Network (ISDN) Service Features
- ISDN Service Access by Keypad Protocol
- Advice of Charge (AOC)
- Call Forwarding (CF)—by ISDN (P-MP)
- Call Forwarding (CF)—by ISDN (P-P)
- Call Hold (HOLD)—by ISDN
- Call Transfer (CT)—by ISDN
- Calling/Connected Line Identification Presentation (CLIP/COLP)
- Malicious Call Identification (MCID)
- Completion of Calls to Busy Subscriber (CCBS)
- ISDN Extension
- E1 Line Service Features
- t1 line service
- voice mail features
- voice mail dtmf integration
- Voice Mail DPT (Digital) Integration
- Digital Wireless Extension (DWX) Features
- DWX Ring Group
- DWX Directory
- DWX Feature Buttons
- Wireless XDP Parallel Mode
- Administrative Information Output Features
- Charge Metre
- Extension Controlling Features
- Personal Programme Clear
- walking extension
- timed reminder
- Remote Extension Control by User
- dial tone
- confirmation tone
- Networking Features
- Virtual Private Network (VPN)
- QSIG Network
- Voice over Internet Protocol (VoIP) Network
- System Configuration and Administration Features
- extension port configuration
- System Configuration—Software
- Group
- tenant service
- time service
- operator features
- manager features
- System Data Control
- PT Programming
- Automatic Setup
- quick setup
- Flexible Numbering/Fixed Numbering
- floating extension
- software upgrading
- power failure transfer
- power failure restart
- local alarm information
- Programming Instructions
- Introduction
- PC Programming
- Configuration
- System
- Line
- Feature
- Toll Restriction (TRS)/Call Barring (Barring)
- Automatic Route Selection (ARS)
- private network
- incoming call
- Maintenance
- Software Version
- password change
- entering characters
- basic programming
- operator assignment
- Charge Rate per Unit
- system programming
- manager password
- Currency
- hold recall time
- disa delayed answer time
- exception code
- ars exception number
- ARS Outgoing Trunk Group for Carrier Access
- trunk group
- lcot pause time
- lcot disconnect time
- bri configuration
- did number
- disa silence detection
- cos programming
- executive busy override deny
- wireless xdp parallel mode for paired telephone
- extension programming
- incoming call distribution group floating extension number
- Incoming Call Distribution Group Type
- queuing time table
- vm group floating extension number
- DWX (Digital Wireless Extension) Registration
- DWX Termination
- external pager floating extension number
- disa security mode
- New Line
- smdr page length
- slot card type reference
- Index
HYBRID IP-PBX KX-TDA100
Table of contents
- installation manual
- system components
- important safety instructions
- Table Of Contents
- Table Of Contents
- Table Of Contents
- System Outline
- System Highlights
- Basic System Construction
- System Connection Diagram
- Options
- Specifications
- Characteristics
- System Capacity
- Installation
- Before Installation
- Installation of the Hybrid IP-PBX
- Names and Locations
- Opening/Closing the Front Cover
- Installing/Replacing the Power Supply Unit
- Frame Earth Connection
- Backup Batteries Connection
- Installing/Removing the Optional Service Cards
- Types of Connectors
- Attaching a Ferrite Core
- Fastening Amphenol Type Connector
- Wall Mounting (KX-TDA200)
- Wall Mounting (KX-TDA100)
- Floor Standing (KX-TDA200 Only)
- Lightning Protector Installation
- Installation of the Main Processing Card
- RMT Card
- Installation of the Trunk Cards
- CID/PAY8 Card
- CID8 Card
- E&M8 Card
- T1 Card
- E1 Card
- BRI4 and BRI8 Cards
- PRI30 Card
- PRI23 Card
- IP-GW4 Card
- Installation of the Extension Cards
- DHLC8 Card
- DLC8 Card
- DLC16 Card
- SLC8 Card
- SLC16 and MSLC16 Cards
- Installation of the Other Cards
- DPH4 Card
- DPH2 Card
- ECHO16 Card
- MSG4 Card
- CTI-LINK Card
- Connection of Extensions
- Parallel Connection of the Extensions
- Extra Device Port (XDP) Connection
- First Party Call Control CTI Connection
- Connection of DECT Portable Stations
- Procedure Overview
- Site Planning
- Before Site Survey
- Site Survey Using the KX-TD7590
- After Site Survey
- Connecting the Cell Station to the Hybrid IP-PBX
- Wall Mounting
- Connection of 2.4 GHz Portable Stations
- Site Survey
- Connection of Doorphones and Door Openers
- Connection of Peripherals
- Auxiliary Connection for Power Failure Transfer
- Starting the Hybrid IP-PBX
- Guide for the KX-TDA Maintenance Console
- Overview
- Connection
- Installation of the KX-TDA Maintenance Console
- Structure of the KX-TDA Maintenance Console
- Hybrid IP-PBX Configuration
- Hybrid IP-PBX Maintenance
- Troubleshooting
- Operation
- Using the Reset Button
- Troubleshooting by Error Log
- Index
HYBRID IP-PBX KX-TDA100
Table of contents
HYBRID IP-PBX KX-TDA100
Table of contents
- installation manual
- system components
- important safety instructions
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- Table Of Contents
- System Outline — KX-TDA100/KX-TDA200
- System Highlights — KX-TDA100/KX-TDA200
- Basic System Construction — KX-TDA100/KX-TDA200
- System Connection Diagram
- Options — KX-TDA100/KX-TDA200
- Specifications — KX-TDA100/KX-TDA200
- Characteristics
- System Capacity
- Installation — KX-TDA100/KX-TDA200
- Before Installation — KX-TDA100/KX-TDA200
- Installation of the Hybrid IP-PBX — KX-TDA100/KX-TDA200
- Names and Locations
- Opening/Closing the Front Cover
- Installing/Replacing the Power Supply Unit
- Frame Earth Connection
- Backup Batteries Connection
- Installing/Removing the Optional Service Cards
- Types of Connectors
- attaching a ferrite core
- Fastening Amphenol Type Connector
- Wall Mounting (KX-TDA200)
- Wall Mounting (KX-TDA100)
- Floor Standing (KX-TDA200 Only)
- Lightning Protector Installation
- Installation of the Main Processing Card — KX-TDA100/KX-TDA200
- MEC Card
- RMT Card
- Installation of the Trunk Cards — KX-TDA100/KX-TDA200
- DID8 Card
- CID/PAY8 Card
- CID8 Card
- E&M8 Card
- T1 Card
- E1 Card
- BRI4 and BRI8 Cards
- PRI30 Card
- PRI23 Card
- IP-GW4 Card
- IP-GW4E Card
- Installation of the Extension Cards — KX-TDA100/KX-TDA200
- DHLC8 Card
- DLC8 Card
- DLC16 Card
- SLC8 Card
- SLC16 and MSLC16 Cards
- Installation of the Other Cards — KX-TDA100/KX-TDA200
- DPH4 Card
- DPH2 Card
- ECHO16 Card
- MSG4 Card
- CTI-LINK Card
- Connection of Extensions — KX-TDA100/KX-TDA200
- Parallel Connection of the Extensions
- Digital EXtra Device Port (Digital XDP) Connection
- First Party Call Control CTI Connection
- Connection of DECT Portable Stations — KX-TDA100/KX-TDA200
- Procedure Overview
- Site Planning
- Before Site Survey
- Site Survey Using the KX-TCA255/KX-TD7590
- After Site Survey
- Connecting a Cell Station to the Hybrid IP-PBX
- Wall Mounting
- Connection of 2.4 GHz Portable Stations — KX-TDA100/KX-TDA200
- Site Survey
- Connection of Doorphones and Door Openers — KX-TDA100/KX-TDA200
- Connection of Peripherals — KX-TDA100/KX-TDA200
- Power Failure Connections — KX-TDA100/KX-TDA200
- Starting the Hybrid IP-PBX — KX-TDA100/KX-TDA200
- TDA200
- Overview — KX-TDA100/KX-TDA200
- Connection — KX-TDA100/KX-TDA200
- Installation of the KX-TDA Maintenance Console — KX-TDA100/KX-TDA200
- Structure of the KX-TDA Maintenance Console
- Hybrid IP-PBX Configuration
- Hybrid IP-PBX Maintenance
- Troubleshooting — KX-TDA100/KX-TDA200
- Connection
- Operation
- Using the Reset Button
- Troubleshooting by Error Log
- System Outline — KX-TDA30
- System Highlights — KX-TDA30
- Basic System Construction — KX-TDA30
- Options — KX-TDA30
- Specifications — KX-TDA30
- Installation — KX-TDA30
- Before Installation — KX-TDA30
- Installation of the Hybrid IP-PBX — KX-TDA30
- Opening/Closing the Covers
- installation of the sd memory card
- Wall Mounting (KX-TDA30)
- Wall Mounting (AC Adaptor)
- Installation of the Trunk Cards — KX-TDA30
- LCOT2 Card
- DID4 Card
- CID4 Card
- BRI2 Card
- BRI1 Card
- Installation of the Extension Cards — KX-TDA30
- SLC4 Card
- Installation of the Other Cards — KX-TDA30
- ECHO8 Card
- MSG2 Card
- EXT-CID Card
- Connection of Extensions — KX-TDA30
- Connection of DECT Portable Stations — KX-TDA30
- Connection of 2.4 GHz Portable Stations — KX-TDA30
- Connection of Doorphones and Door Openers — KX-TDA30
- Connection of Peripherals — KX-TDA30
- Power Failure Connections — KX-TDA30
- Starting the Hybrid IP-PBX — KX-TDA30
- Guide for the KX-TDA30 Maintenance Console — KX-TDA30
- Overview — KX-TDA30
- Connection — KX-TDA30
- Installation of the KX-TDA30 Maintenance Console
- Structure of the KX-TDA30 Maintenance Console
- Troubleshooting — KX-TDA30
- Index
HYBRID IP-PBX KX-TDA100
Table of contents
HYBRID IP-PBX KX-TDA100
Table of contents
- Table Of Contents
- Introduction
- Safety Notices
- Using IP Proprietary Telephones on Local and Remote Office LANs
- network parameters
- Network Management
- VLAN (Virtual LAN)
- Packet Control Features
- Guidance for VoIP Installation
- VoIP Requirements
- Network Devices
- VoIP Requirements Checklist
- Installation
- Installing in the KX-TDA30 PBX
- Installing in the KX-TDA100/KX-TDA200/KX-TDA600 PBX
- Connecting to the LAN
- Connecting the IP Proprietary Telephones
- Programming
- Programming the IP-EXT Card
- Programming the IP Proprietary Telephone
- Setting the VLAN Parameters
- Setting the Diffserv Parameters
- Configuration of IP Ports
- Registering IP Proprietary Telephones
- De-registering IP-PTs
- A Troubleshooting
- A.1 Troubleshooting
- A.1.2 Error Messages
manualsdatabase
Your AI-powered manual search engine