3-80Click Save Configuration. The Save Configuration Page opens.Figure 3-87 Save Configuration PageClick OK. The configuration is saved.Resetting the SwitchThe Reset Page restores the switch factory defaults.To prevent the current configuration from being lost, use the Save Configuration Page to save alluser-defined changes to the flash memory before resetting the switch.Click Administration > Reset. The Reset Page opens.Figure 3-88 Reset PageManaging System FilesThe configuration file structure consists of the following configuration files:z Startup Configuration File: Contains the commands required to reconfigure the switch to the samesettings as when the switch is powered down or rebooted. The Startup file is created by copying theconfiguration commands from the running configuration file or by downloading the configuration filefrom via TFTP or HTTP.
