3-65Item DescriptionIEEE 802.1The IEEE 802.1 defined LLDP TLVs supported by thedevice include the following:z Port Vlan ID: Checked to include the VLAN ID(s) onthe port.z Protocol Vlan ID: Checked to include the IDs of theprotocol VLAN(s) on the port.z Vlan Name: Checked to include the VLAN names onthe port.Check the option of All IEEE802.1, all the aboveIEEE802.1 organizationally specific TLVs will be sentwithin LLDPDUsIEEE 802.3The IEEE 802.3 defined LLDP TLVs supported by thedevice include the following:z MAC/PHY: The rate, duplex mode, and speedauto-negotiation state of the port.z POE Power: Power supply capability of the port.z Link Aggregation: Indicates the support of the port forlink aggregation, and the aggregation status (whetherthe link is in an aggregation).z Maximum Frame Size: Supported maximum framesize. Currently, it takes the MTU of the port.z Stateful Control: Provides the supported maximumpower of the port to a device connected with it,then thedevice decides whether to supply power.If you check the option of All IEEE802.3, all the aboveIEEE802.3 organizationally specific TLVs will be sentwithin LLDPDUsLLDP-MEDThe MED related LLDP TLVs include the followingz Capability: MED device type of the device, and typesof LLDP MED TLVs that can be encapsulated inLLDPDUs.z Network Policy: VLAN ID of the port, supportedapplications (voice and video, for example), andpriority and policy of each application.z Power Over Ethernet: Power supply capability of theport.z Inventory: Inventory information of the local device,including Hardware Revision TLV, Firmware RevisionTLV, Software Revision TLV, Serial Number TLV,Manufacturer Name TLV, Model Name TLV, Asset IDTLV used for inventory management and assertingtracking.If you check the option of All LLDP-MED to encapsulateall LLDP-MED TLVs supported by the deviceViewing LLDP InformationViewing Global LLDP Information and Received LLDP InformationClick Device > LLDP > Global Summary. The Global LLDP Information and Received LLDPInformation Page opens.