3-49Table 3-41 CoS to Queue Setup Page item descriptionItem DescriptionRestore Defaults Restores the switch factory defaults for mapping CoS values to forwardingqueues.Class of Service Specifies the CoS priority tag values, where 0 is the lowest and 7 is thehighest.Queue Defines the traffic forwarding queue to which the CoS priority is mapped.Viewing CoS to QueueThe CoS to Queue Summary Page contains a table that displays the CoS values mapped to trafficqueues.Click Device > QoS > CoS to Queue. The CoS to Queue Summary Page opens.Figure 3-53 CoS to Queue Summary PageThe CoS to Queue Summary Page contains the following fields:Table 3-42 CoS to Queue Summary Page item descriptionItem DescriptionClass of Service Displays the CoS priority tag values, where 0 is the lowest and 7 is thehighest.Queue Indicates the traffic forwarding queue to which the CoS priority is mapped.Four traffic priority queues are supported.Configuring DSCP to QueueDefining DSCP to QueueThe DSCP to CoS Setup Page contains fields for mapping DSCP settings to CoS priority tag values. Forexample, In default, a packet with a DSCP tag value of 3 can be assigned to queue 1.Click Device > QoS > DSCP to Queue > Setup. The DSCP to Queue Setup Page opens.