3-48Figure 3-51 Queue Setup PageThe Queue Setup Page contains the following fields:Table 3-40 Queue Setup Page item descriptionItem DescriptionHQ-WRRThis highest queue is transmitted first if any packets are in the highestqueue. When the highest queue is exhausted, the remaining queues areserved by WRR.WRR(ratio1:2:10:15)This queue algorithm specifies which port queue that each packet should besent to. The actual bandwidth of each port queue is determined by theweight, whose values are 1,2,10 and 15.Configuring CoS to QueueDefining CoS to QueueThe CoS to Queue Setup Page contains fields for mapping CoS values to traffic queues. Four trafficpriority queues are supported on the switch, with 1 representing the lowest queue and four as thehighest. The highest priority queue functions with strict priority while queues 1-3 function with WRRpriority with the following weights (1, 2, 10 and 15) respectively.Click Device > QoS > CoS to Queue > Setup. The CoS to Queue Setup Page opens.Figure 3-52 CoS to Queue Setup PageThe CoS to Queue Setup Page contains the following fields: