3-62Item DescriptionTransmit IntervalSet the interval for sending LLDPDUs.A port operating in TxRx mode or Tx mode sends LLDPDUs to its directlyconnected device periodically.By default, the interval is 30 seconds.TLL Hold MultiplierSet the TTL multiplier.You can configure the TTL of locally sent LLDPDUs to determine how longthey can be saved on a neighbor device by setting the TTL hold multiplier.The TTL is expressed as:TTL multiplier × LLDPDU sending intervalBy default, the TTL multiplier is 4.Fast CountSet the number of successive fast-sent LLDPDUs.This fast sending mechanism allows your LLDPDU switch to be discoveredby its neighbors quickly. After the specified numbers of LLDPDUs are sent,the normal sending interval restores.The default fast count is 3.Initialization DelaySet the delay time of an LLDP-enabled port to prevent frequent port LLDPinitializations.The default delay of a port is 2 seconds.
