3-51Table 3-44 DSCP to Queue Summary Page item descriptionItem DescriptionDSCP Displays the incoming packet’s DSCP value.CoS Indicates the CoS value forwarding queue to which the DSCP priority ismapped. The possible field values are 0-7.Configuring Trust ModeThe Trust Setup Page contains information for configuring trust mode on the switch.Click Device > QoS > Trust > Setup. The Trust Setup Page opens.Figure 3-56 Trust Setup PageThe Trust Setup Page contains the following fields:Table 3-45 Trust Setup Page item descriptionItem DescriptionTrust ModeSpecifies which packet fields to use for classifying packets entering theswitch. When no rules are defined, the traffic containing the predefinedpacket CoS field is mapped according to the relevant trust modes table.Traffic not containing a predefined packet field is mapped to "best effort".The possible Trust Mode field values are:z CoS: Classifies traffic based on the CoS tag value.z DSCP: Classifies traffic based on the DSCP tag value.Configuring Bandwidth SettingsDefining Bandwidth SettingsThe Bandwidth Setup Page allows network managers to define the bandwidth settings for a specifiedinterface.Click Device > QoS > Bandwidth > Setup. The Bandwidth Setup Page opens.
