3-43Table 3-33 IP Based ACL Remove Page item descriptionItem DescriptionACL Name Selects an IP-based ACL for removal.Remove ACL Enables the ACL to be removed.To remove an IP-based ACL:1) Select an ACL Name to be removed.2) Check Remove ACL.3) Click Remove.To remove IP-based ACL rules:1) Select an ACL Name.2) For each rule to be removed, check the box to the left of the row in the rules table. To remove allrules, the topmost box may be checked.3) Click Remove.Viewing IP Based ACLThe IP Based ACL Summary Page displays information regarding IP-based ACL configured on theswitch.Click Device > ACL > IP Based ACL. The IP Based ACL Summary Page opens.Figure 3-45 IP Based ACL Summary PageThe IP Based ACL Summary Page contains the following fields:Table 3-34 IP Based ACL Summary Page item descriptionItem DescriptionACL Name Contains a list of the IP Based ACLACL Priority Indicates the ACL Priority.PriorityIndicates the rule priority, which determines which rule is matched to apacket on a first-match basis. The possible field values are 1-65535, with 1being the highest priority.Protocol Indicates the protocol in the rule to which the packet is matched.Source Port Indicates the source port that is matched packets. Enabled only when TCPor UDP are selected in the Protocol list.Destination Port Indicates the destination port that is matched packets. Enabled only whenTCP or UDP are selected in the Protocol list.Flag Set Indicates the TCP flag to which the packet is mapped.
