1-4LED Status DescriptionOFFThe link has not been established, eithernothing is connected to the port, or there is aproblem:z Check that the attached device is poweredon.z Check that the cable or fiber is the correcttype and is not faulty.z For fiber connections, ensure that thereceive (RX) and transmit (TX) cableconnectors are not swapped.If these checks do not identify the cause ofthe problem, it may be that the unit or thedevice connected to the port is faulty. Contactyour supplier for further advice.Yellow The port is in full duplex mode.Duplex 10/100/1000BASE-T port OFF The port is not connected, or is in half duplexmode.Green The SFP module is inserted.Module Active SFP portOFF The SFP module is not inserted or is notrecognized.Green The port is supplying power to the deviceconnected to it.PoE Power (Only supported byBaseline Switch 2426-PWR Plus)OFF The port is not supply power to the deviceconnected to it or not connected.System SpecificationsTable 1-3 contains the system specifications of the Switch.Table 1-3 System specifications of the Switch.Specification 2226-SFP 2426-PWR 2250-SFPPhysical dimensions(H×W×D)44 mm×440 mm×170mm44 mm×440mm×238 mm44 mm×440 mm×238mmWeight 1.6 kg 3.2 kg 2.9 kgConsole port 1 1 1Ethernet port 2424 (Each port canprovide a powersupply of 25 W)48Gigabit Combo port 2 2 2AC Input voltageRated voltage range:100–240V AC, 50/60HzRated voltage range:100–240V AC, 50/60HzRated voltage range:100–240V AC, 50/60HzPower consumption (fullload) 17 W 205 W 26 WOperating temperature 0°C to 40°C (32°F to 104°F)Storage temperature –40°C to +70°C (–40°F to 158°F)
