3-87Table 3-75 Port Mirroring Setup Page item descriptionItem DescriptionSelect port typeDefines the monitor port (destination port) or mirror port (sourceport). The possible values are:z Monitor: Defines the port as the monitor port.z Mirror: Defines the port as the mirrored port to be monitoredand indicates the traffic direction to be monitored. If selected,the possible values are: Mirror In (Enables port mirroring on theport RX), Mirror Out (Enables port mirroring on the port TX).Removing Port MirroringThe Port Mirroring Remove Page permits the network manager to terminate port mirroring ormonitoring.Click Monitoring > Port Mirroring > Remove. The Port Mirroring Remove Page opens.Figure 3-96 Port Mirroring Remove PageConfiguring Cable DiagnosticsThe switch provides cable diagnostic, which helps you detect and resolve issues with the attachedcables.This section contains the following topics:z Configuring Cable Diagnosticsz Viewing Cable DiagnosticsConfiguring Cable DiagnosticsThe Cable Diagnostics Page permits the network manager to perform tests for individual port.Click Monitoring > Cable Diagnostics > Diagnostics. The Diagnostics Page opens.
