7-17 Regulatory NoticesFCC StatementThis equipment has been tested and found to comply with the limits for a Class digital device, pursuantto Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a commerical environment. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. Operation of this equipment in a residential area is likely to causeharmful interference to radio communications, in which case the user will be required to correct theinterference at their own expense.Information to the UserIf this equipment does cause interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:z Reorient the receiving antenna.z Relocate the equipment with respect to the receiver.z Move the equipment away from the receiver.z Plug the equipment into a different outlet so that equipment and receiver are on different branchcircuits.If necessary the user should consult the dealer or an experienced radio/television technician foradditional suggestions. The user may find the following booklet prepared by the FederalCommunications Commission helpful:How to Identify and Resolve Radio-TV Interference ProblemsThis booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No.004-000-00345-4. In order to meet FCC emissions limits, this equipment must be used only with cableswhich comply with IEEE 802.3.ICES StatementThis Class A digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la Classe A est conforme à la norme NMB-003 du Canada.CE Statement (Europe)EU Representative:3Com Europe LimitedPeoplebuilding 2, Peoplebuilding EstateMaylands AvenueHemel Hempstead, Hertfordshire