3-47Table 3-38 CoS Setup Page item descriptionItem DescriptionQoS ModeSpecifies if QoS is enabled on the switch. The possible values are:z Disabled: Restores the switch factory defaults for QoS values anddisables configure QoS values on the switch.z Enabled: Enables configure QoS values on the switch.Set Default Sets the default user priority. The possible field values are 0-7, where 0 is thelowest and 7 is the highest priority.Restore Default Restores the switch factory defaults for CoS values.Viewing CoS SettingsThe CoS Summary Page displays CoS default settings assigned to ports.Click Device > QoS > CoS. The CoS Summary Page opens.Figure 3-50 CoS Summary PageThe CoS Summary Page contains the following fields:Table 3-39 CoS Summary Page item descriptionItem DescriptionPort Displays the interface for which the CoS default value is defined.Default CoS Displays the default CoS value for incoming packets for which a VLANpriority tag is not defined.Configuring Queue AlgorithmThe Queue Setup Page contains the queue algorithm information.Click Device > QoS > Queue. The Queue Setup Page opens.
