3-8Adding MAC Addresses to the Address TableThe Address Table Add Page allows the network manager to assign MAC addresses to ports withVLANs.Click Monitoring > Address Table > Add. The Address Table Add Page opens.Figure 3-9 Address Table Add PageThe Address Table Add Page contains the following fields:Table 3-8 Address Table Add Page item descriptionItem DescriptionVLAN ID Selects a VLAN ID.MAC Address Defines a MAC address to be assigned to the specific port and VLAN ID.No AgingMarks the aging status of the MAC address assigned by the user. Thepossible values are:z Checked: Indicates that the Address Table entry assigned by the user isnot aged out.z Unchecked: Indicates that the Address Table entry assigned by the useris aged out.Defining Aging TimeThe Address Table Aging Time Setup Page allows the network manager to define the Address TableAging Time. The Aging Time is the amount of time the MAC addresses remain in the Dynamic Addresstable before they are timed out if no traffic from the source is detected. The default value is 300seconds.Click Monitoring > Address Table > Setup. The Address Table Aging Time Setup Page opens.
