3-83Item DescriptionTFTP Server IP Address Specifies the TFTP Server IP Address from which the image filesare downloaded.Source File Name Specifies file name for the downloaded image file. Click Browse tolocate the image file on your computer.Activating Image FilesThe Active Image Page allows network managers to select and reset the Image files.Click Administration > Firmware Upgrade > Active Image. The Active Image Page opens.Figure 3-92 Active Image PageThe Active Image Page contains the following fields:Table 3-71 Active Image Page item descriptionItem DescriptionActive Image After ResetSelects the image file to be active on the unit after the switch isreset. The possible field values are:z Current Image: Activates the current image after the switch isreset.z Backup Image: Activates backup image after the switch isreset.Managing System LogsThis section provides information for managing system logs. The system logs enable viewing switchevents in real time, and recording the events for later usage. System Logs record and manage eventsand report errors and informational messages. Event messages have a unique format, as per thesystem Log protocols recommended message format for all error reporting. For example, system Logand local device reporting messages are assigned a severity code, and include a message mnemonic,which identifies the source application generating the message. It allows messages to be filtered basedon their urgency or relevancy. Each message severity determines the set of event logging devices thatare sent per each event message.The following table lists the log severity levels: