3-60Figure 3-67 SNMP Traps Setup PageThe SNMP Traps Setup Page contains the following fields:Table 3-53 SNMP Traps Setup Page item descriptionItem DescriptionRecipients IP Address Defines the IP address to which the traps are sent.Community String Defines the community string of the trap manager.Trap VersionDefines the trap type. The possible field values are:z SNMP V1: Indicates that SNMP Version 1 traps are sent.z SNMP V2c: Indicates that SNMP Version 2 traps are sent.Removing SNMP TrapsThe SNMP Traps Remove Page allows the system manager to remove SNMP Traps.Click Administration > SNMP > Traps > Remove. The SNMP Traps Remove Page opens.Figure 3-68 SNMP Traps Remove PageTo Remove SNMP Traps:1) Select the SNMP Traps.2) Click Remove.