3-59Item DescriptionStandardSelects pre-defined community strings. The possible field values are:z Public: Displays the pre-defined public community string name.z Private: Displays the pre-defined private community string name.User Defined Defines a user-defined community string name.Access ModeDefines the access rights of the community. The possible field values are:z Read Only: Management access is restricted to read-only, and changescannot be made to the community.z Read Write: Management access is read-write and changes can be madeto the switch configuration, but not to the community.Removing SNMP CommunitiesThe SNMP Communities Remove Page allows the system manager to remove SNMP Communities.Click Administration > SNMP > Communities > Remove. The SNMP Communities Remove Pageopens.Figure 3-66 SNMP Communities Remove PageTo Remove SNMP Communities:1) Select the SNMP Communities.2) Click Remove.Defining SNMP TrapsThe SNMP Traps Setup Page allows the system manager to defining filters that determine whethertraps are sent to specific users, and the trap type sent.Click Administration > SNMP > Traps > Setup. The SNMP Traps Setup Page opens.
