3-44Item DescriptionSource IP Address Matches the source IP address to which packets are addressed to the ACL.Source Mask Indicates the source IP address mask.Destination IPAddressMatches the destination IP address to which packets are addressed to theACL.Destination Mask Indicates the destination IP address mask.DSCP Matches the packet DSCP value to the ACL. Either the DSCP value or the IPPrecedence value is used to match packets to ACLs.IP Precedence Indicates matching ip-precedence with the packet IP precedence value.ActionIndicates the ACL forwarding action. In addition, the port can be shut down, atrap can be sent to the network administrator, or packet is assigned ratelimiting restrictions for forwarding.Configuring ACL BindingThis section includes the following topics:z Defining ACL Bindingz Removing ACL Bindingz Viewing ACL BindingDefining ACL BindingThe ACL Binding Setup Page allows the network administrator to bind specific ports to MAC or IP basedACLs.Click Device > ACL > ACL Binding > Setup. The ACL Binding Setup Page opens.Figure 3-46 ACL Binding Setup PageThe ACL Binding Setup Page contains the following fields:Table 3-35 ACL Binding Setup Page item descriptionItem DescriptionBind ACL Assigns ACL typeSelect ACL Selects the ACL from a list of previously defined ACLs to which the port canbe bound.