3Com Switch 7750 SeriesCommand Reference Guide — IP / IPXChapter 2 IP Performance ConfigurationCommands2-4timestamp 0 information reply 0mask requests 0 mask replies 0time exceeded 0Table 2-3 Description on the fields of the display icmp statistics commandField Descriptionbad formats Number of input packets in bad formatsbad checksum Number of input packets with bad checksumecho Number of input/output echo request packetsdestination unreachable Number of input/output packets with unreachabledestinationsource quench Number of input/output source quench packetsredirects Number of input/output redirected packetsecho reply Number of input/output echo reply packetsparameter problem Number of input/output packets with parameterproblemtimestamp Number of input/output timestamp packetsinformation request Number of input information request packetsmask requests Number of input/output mask request packetsmask replies Number of input/output mask reply packetsinformation reply Number of output information reply packetstime exceeded Number of time exceeded packets2.1.3 display ip socketSyntaxdisplay ip socket [ socktype sock-type ] [ task-id socket-id ]ViewAny viewParametersock-type: Type of a socket, ranging from 1 to 3. These values correspond toSOCK_STREAM (TCP socket), SOCK_DGRAM (UDP socket or socket based on thelink layer), and SOCK_RAW (RAW IP socket).task-id: ID of a task, with the value ranging from 1 to 100.socket-id: ID of a socket, with the value ranging from 0 to 3072.
