3Com Switch 7750 SeriesCommand Reference Guide – Routing Protocol Chapter 3 OSPF Configuration Commands3-25Next hops:Address Type Refcount Intf Addr Intf Name---------------------------------------------------------------202.38.160.1 Direct 3 202.38.160.1 Vlan-interface2202.38.160.2 Neighbor 1 202.38.160.1 Vlan-interface2Table 3-9 Description on the fields of the display ospf nexthop commandField DescriptionAddress Address of next hopType Type of next hopRefcount Reference count of the next hop, namely, number of routesusing the next hopIntf Addr IP address of the interface to the next hopIntf Name Interface to the next hopnexthop Next hop3.1.20 display ospf peerSyntaxdisplay ospf [ process-id ] peer [ brief | statistics ]ViewAny viewParameterprocess-id: OSPF Process ID, in the range of 1 to 65,535. If you do not specify aprocess ID, this command applies to all current OSPF processes.DescriptionUse the display ospf peer command to display the information about OSPF peer.Use the display ospf peer brief command to display the brief information, includingrouter ID, interface, and state, about every OSPF peer.Use the display ospf peer statistics command to display the statistics of everyOSPF peer, namely, the number of peers in various states in every area.Example# Display the information about OSPF peer.<3Com> display ospf peerOSPF Process 1 with Router ID 1.1.1.1
