3Com Switch 7750 SeriesCommand Reference Guide — IP / IPX Chapter 3 IPX Configuration Commands3-33.1.2 display ipx routing-tableSyntaxdisplay ipx routing-table [ network [ verbose ] | protocol { default | direct | rip |static } [ inactive | verbose ] | statistics | verbose ]ViewAny viewParameternetwork: Displays IPX routing information by specifying a destination network number,which comprises eight hexadecimal numbers and is in the range of 1 to 0xFFFFFFFE.protocol: Displays the IPX routing information of the specified route type.default: Displays the information of all the default routes.direct: Displays information of all the direct routes.rip: Displays all the IPX RIP routing information.static: Displays all the IPX static routing information.inactive: Displays the information of the inactive routes.verbose: Displays the detailed IPX routing information, including the active andinactive routes.statistics: Displays the IPX routing statistics.DescriptionUse the display ipx routing-table command to view the IPX routing information.If no parameters are specified, the information of all the active IPX routes will bedisplayed.Example# View the information of the active IPX routes.<3Com> display ipx routing-tableRouting tables:Summary count: 2Dest_Ntwk_ID Proto Pre Ticks Hops Nexthop Interface0x1 Direct 0 1 0 0.0000-0000-0000 Vlan-interface10x2 Static 60 1 1 1.000e-0001-0000 Vlan-interface1
