3Com Switch 7750 SeriesCommand Reference Guide – QoS Chapter 1 QoS Commands1-23Table 1-7 The reset acl counter command vs the reset traffic-statistic commandCommand Functionreset acl counterClear the ACL statistics.This command is applicable to ACLs used for filtering andclassifying the traffic processed by software.ACLs are referenced by software in the following cases:z Referenced by routing policiesz Referenced when login users are controlledIn these cases, the ACL number is in the range of 2,000 to3,999.Refer to the ACL module in this manual for the introductionto the reset acl counter command.reset traffic-statisticClear the traffic statistics.This command is applicable to ACLs applied to thehardware of the switch for filtering and classifying trafficduring data forwarding. Generally, this command is used toclear the statistics information obtained through thetraffic-statistic command.Example# Clear the statistics about traffic matching ACL 2000.<3Com> system-view[3Com] interface Ethernet1/0/1[3Com-Ethernet1/0/1] qos[3Com-qoss-Ethernet1/0/1] reset traffic-statistic inbound ip-group 20001.1.21 traffic-bandwidthSyntaxtraffic-bandwidth outbound acl-rule [ system-index ] min-guaranteed-bandwidthmax-guaranteed-bandwidth weightundo traffic-bandwidth outbound acl-ruleViewQoS view
