3Com 7750 Series Command Reference Manual

Also see for 7750 Series: Datasheet Installation guide Installation guide Quick reference guide Product guide

Contents

3Com Switch 7750 SeriesCommand Reference Guide – SNMP & RMON Chapter 1 SNMP Configuration Commands1-18ViewSystem viewParameterseconds: Aging time, in seconds, ranging from 1 to 2,592,000.DescriptionUse the snmp-agent trap life command to set aging time for Trap packets. The Trappackets exceeding the aging time are discarded.Use the undo snmp-agent trap life command to restore the default aging time forTrap packets.By default, the aging time of SNMP Trap packets is 120 seconds.After the specified aging time has elapsed, the system drops the trap packet.Related command: snmp-agent trap enable, snmp-agent target-host.Example# Set the aging time for Trap packets as 60 seconds.<3Com>system-viewSystem View: return to User View with Ctrl+Z.[3Com] snmp-agent trap life 601.1.19 snmp-agent trap queue-sizeSyntaxsnmp-agent trap queue-size sizeundo snmp-agent trap queue-sizeViewSystem viewParametersize: Length of a queue, ranging from 1 to 1,000.DescriptionUse the snmp-agent trap queue-size command to configure the information queuelength of Trap packet sent to destination host.Use the undo snmp-agent trap queue-size command to restore the default value.Related command: snmp-agent trap enable, snmp-agent target-host andsnmp-agent trap life.