3Com Switch 7750 SeriesCommand Reference Guide – AAA, RADIUS, HWTACACS, EADChapter 1 AAA & RADIUS & HWTACACSConfiguration Commands1-20DescriptionUse the service-type command to authorize the user to access the specified type(s) ofservice(s).Use the undo service-type command to inhibit the user from accessing the specifiedtype(s) of service(s).By default, the user is inhibited from accessing any type of service.Example# Authorize 3Com1 to access the lan-access service.<3Com>system-viewSystem View: return to User View with Ctrl+Z.[3Com] local-user 3Com1[3Com-luser-3Com1] service-type lan-access1.1.19 stateSyntaxstate { active | block }ViewISP domain view or local user viewParameteractive: Activates the current ISP domain (in ISP domain view) or current user (in localuser view), to allow users in current ISP domain or current user to access the network.block: Hangs up the current ISP domain (in ISP domain view) or current user (in localuser view), to inhibit users in current ISP domain or current user from accessing thenetwork.DescriptionUse the state command to set the status of current ISP domain or the status of the localuser.By default, an ISP domain is in the active state once it is created (in ISP domain view),and a local user is in the active state once the user is created (in local user view).In ISP domain view, each ISP domain can be in one of two states: active and block.Users in an active ISP domain are allowed to access the network. After an ISP domainis set to the block state, except the online users, the users under this domain are notallowed to access the network.Related command: domain.
