3Com Switch 7750 SeriesCommand Reference Guide – Routing Protocol Chapter 1 Static Route Configuration Commands1-6z display ip routing-table ip-address maskThis command only displays the routes exactly matching the specified destinationaddress and mask.z display ip routing-table ip-address longer-matchThis command displays all destination address routes matching the specifieddestination address in the natural mask range.z display ip routing-table ip-address mask longer-matchThis command displays all destination address routes matching the specifieddestination address in the specified mask range.Example# There is a corresponding route in the natural mask range. Display the summary.<3Com> display ip routing-table 169.0.0.0Destination/Mask Protocol Pre Cost Nexthop Interface169.0.0.0/16 Static 60 0 2.1.1.1 LoopBack1For detailed description of the output information, see Table 1-1.# There is no corresponding route (only the longest matching route is displayed) in thenatural mask range. Display the summary.<3Com> display ip routing-table 169.253.0.0Destination/Mask Protocol Pre Cost Nexthop Interface169.0.0.0/8 Static 60 0 2.1.1.1 LoopBack1# There are corresponding routes in the natural mask range. Display detailedinformation.<3Com> display ip routing-table 169.0.0.0 verboseRouting Tables:Generate Default: no+ = Active Route, - = Last Active, # = Both * = Next hop in useSummary count:2**Destination: 169.0.0.0 Mask: 255.0.0.0Protocol: #Static Preference: 60*NextHop: 2.1.1.1 Interface: 2.1.1.1(LoopBack1)Vlinkindex: 0State: Age: 3:47 Cost: 0/0 Tag: 0**Destination: 169.0.0.0 Mask: 255.254.0.0Protocol: #Static Preference: 60*NextHop: 2.1.1.1 Interface: 2.1.1.1(LoopBack1)Vlinkindex: 0State:
