3Com Switch 7750 SeriesCommand Reference Guide – 802.1x Chapter 1 802.1x Configuration Commands1-151.1.12 dot1x retry-version-maxSyntaxdot1x retry-version-max max-retry-version-valueundo dot1x retry-version-maxViewSystem viewParametermax-retry-version-value: Maximum number of times that a switch will resend versionrequest packets to a supplicant system. This argument ranges from 1 to 10.DescriptionUse the dot1x retry-version-max command to set the maximum number of times thata switch will resend version request packets to a connected supplicant system.Use the undo dot1x retry-version-max command to revert to the default value.By default, the switch can send version request packets to an access user for up tothree times repeatedly.Having sent a version request packet to the supplicant system, the switch will resendthe packet if within a preset period (as determined by the client version timer) it still hasnot received any response from the supplicant system. When the number set by thiscommand has reached and there is still no response from the supplicant system, theswitch will continue its following authentication without sending further version requests.This command applies to all ports.Related commands: display dot1x, dot1x timer.Example# Configure the maximum number of times that the switch will resend version requestpackets to be 6.<3Com>system-viewSystem View: return to User View with Ctrl+Z.[3Com] dot1x retry-version-max 61.1.13 dot1x supp-proxy-checkSyntaxdot1x supp-proxy-check { logoff | trap } [ interface interface-list ]undo dot1x supp-proxy-check { logoff | trap } [ interface interface-list ]
