3Com Switch 7750 SeriesCommand Reference Guide – 802.1x Chapter 1 802.1x Configuration Commands1-91.1.6 dot1x max-userSyntaxdot1x max-user user-number [ interface interface-list ]undo dot1x max-user [ interface interface-list ]ViewSystem view, Ethernet port viewParameteruser-number: Maximum number of users a port can accommodate, ranging from 1 to1024. The default number is 1024.interface-list: List of Ethernet ports, expressed as interface-list = { interface-name [ tointerface-name ] } & < 1-10 >. The interface-name argument specifies the port index ofan Ethernet port and can be specified in this form: interface-name = { interface-typeinterface-num }, where interface-type specifies the type of a port and interface-numidentifies the port number. "&<1-10>" means that up to 10 port indexes/port index listscan be provided.DescriptionUse the dot1x max-user command to set the maximum number of supplicant systemsan Ethernet port can accommodate.Use the undo dot1x max-user command to revert to the default maximum supplicantsystem number.When being executed in system view, these two commands apply to all Ethernet portsof the switch if you do not provide the interface-list argument. And if you specify theinterface-list argument, these commands apply to the specified Ethernet ports.When being executed in Ethernet port view, these two commands apply to the currentEthernet port only. In this case, the interface-list argument is not needed.Related command: display dot1x.Example# Configure the maximum number of users that Ethernet 3/01 can accommodate to be32.<3Com>system-viewSystem View: return to User View with Ctrl+Z.[3Com] dot1x max-user 32 interface Ethernet 3/0/1
