3Com Switch 7750 SeriesCommand Reference Guide – AAA, RADIUS, HWTACACS, EADChapter 1 AAA & RADIUS & HWTACACSConfiguration Commands1-11Related command: domain.Example# Allow users in ISP domain aabbcc.net to enable the idle-cut attribute in user template(that is, allow the user to use the idle-cut function), with the maximum idle time of 50minutes and the minimum data flow of 500 bytes.<3Com>system-viewSystem View: return to User View with Ctrl+Z.[3Com] domain aabbcc.netNew Domain added.[3Com-isp-aabbcc.net] idle-cut enable 50 5001.1.9 levelSyntaxlevel levelundo levelViewLocal user viewParameterlevel: Priority level of the user. It is an integer ranging from 0 to 3 and defaulting to 0.DescriptionUse the level command to set the priority level of the user.Use the undo level command to restore the default priority level of the user.Note:The commands that a user can access after login is determined by the priority level ofthe user and the level set on the user interface. If the two levels are different:z The command level that a user passing AAA/RADIUS authentication can access isdetermined by the priority level of the user. For example, if the priority level of a useris 3 and the command level set on the VTY 0 user interface is 1, the user can accessthe commands under level 3 after logging in to the system from VTY 0.z The command level that a user passing RSA authentication can access isdetermined by the level set on the user interface.
