3Com Switch 7750 SeriesCommand Reference Guide – Routing Protocol Chapter 5 BGP Configuration Commands5-41ip-prefix-name: Name of the specified ip-prefix, containing 1 to 19 characters.DescriptionUse the peer ip-prefix import command to configure the route filtering policy ofroutes received by the peer/peer group based on the ip-prefix.Use the undo peer ip-prefix import command to cancel the route filtering policy ofthe peer/peer group based on the ip-prefix.By default, the route filtering policy of the peer/peer group is not specified.Related command: ip ip-prefix, peer ip-prefix export.Example# Configure the route filtering policy of the peer group based on the ip-prefix 1.<3Com>system-viewSystem View: return to User View with Ctrl+Z.[3Com] bgp 100[3Com-bgp] peer group1 ip-prefix list1 import5.1.46 peer next-hop-localSyntaxpeer group-name next-hop-localundo peer group-name next-hop-localViewBGP viewParametergroup-name: Name of the peer group, containing 1 to 47 characters.DescriptionUse the peer next-hop-local command to configure the peer group to take its ownaddress as the next hop when routes are advertised to the peer group..Use the undo peer next-hop-local command to cancel the existing configuration.Example# When BGP distributes the routes to the peer group “test”, it will take its own addressas the next hop.<3Com>system-viewSystem View: return to User View with Ctrl+Z.[3Com] bgp 100[3Com-bgp] peer test next-hop-local
