3Com Switch 7750 SeriesCommand Reference Guide – AAA, RADIUS, HWTACACS, EADChapter 1 AAA & RADIUS & HWTACACSConfiguration Commands1-15Parameterstring: VLAN Name for VLAN assignment, a character string of up to 32 characters.DescriptionUse the name command to set a VLAN name, which will be used for VLAN assignment.Use the undo name command to cancel the VLAN name.By default, an VLAN uses its VLAN ID (like VLAN 0001) as its name.This command is used for the dynamic VLAN assignment function. For details aboutthis function, refer to the vlan-assignment-mode command.Related command: dot1x guest-vlan and vlan-assignment-mode.Example# Set the name of VLAN 100 to test.<3Com>system-viewSystem View: return to User View with Ctrl+Z.[3Com] vlan 100[3Com-vlan100] name test1.1.14 passwordSyntaxpassword { simple | cipher } passwordundo passwordViewLocal user viewParametersimple: Specifies to display the password in plain text.cipher: Specifies to display the password in cipher text.password: Password you want to set, a character string.z For simple mode, the password must be in plain text.z For cipher mode, the password can be either in cipher text or in plain text,depending on your input.A password in plain text can be a string with of up to 16 consecutive characters, forexample, 3Com918. A password in cipher text can be 24 characters in length, forexample, _(TT8F]Y\5SQ=^Q`MAF4<1!!.
