V6100 and V7122 User Guide 179RADIUS ParametersFor detailed information on the supported RADIUS attributes, see Supported RADIUSAttributes.Table 46 RADIUS Parameterini File Field NameWeb Parameter Name Valid Range and DescriptionEnableRADIUS[Enable RADIUS]0 = RADIUS application is disabled (default).1 = RADIUS application is enabled.AAAIndications[AAA Indications]0 = No indications (default).3 = Accounting onlyMaxRADIUSSessions[Max. RADIUS Sessions]Number of concurrent calls that can communicate with the RADIUS server(optional).The valid range is 0 to 240.The default value is 240.SharedSecret[Shared Secret]‘Secret’ used to authenticate the gateway to the RADIUS server. It should bea cryptographically strong password.RADIUSRetransmission[RADIUS Max.Retransmissions]Number of retransmission retries.The valid range is 1 to 10.The default value is 3.RadiusTO The interval between each retry (measured in seconds).The valid range is 1 to 30.The default value is 10.RADIUSAuthServerIP[RADIUS AuthenticationServer IP Address]IP address of Authentication and Authorization server.RADIUSAuthPort[RADIUS Authentication Port]Port number of Authentication and Authorization server.The default value is 1645.RADIUSAccServerIP[RADIUS Accounting ServerIP Address]IP address of accounting server.RADIUSAccPort[RADIUS Accounting Port]Port number of Radius accounting server.The default value is 1646.RadiusAccountingType[RADIUS Accounting Type]Determines when a RADIUS accounting report is issued.0 = At the Release of the call only (default).1 = At the Connect and Release of the call.2 = At the Setup and Release of the call.DefaultAccessLevel[Default Access Level]Defines the default access level for the gateway when the RADIUS(authentication) response doesn’t include an access level attribute.The valid range is 0 to 255. The default value is 200 (Security Administrator').
