440V6100 and V7122 User Guide value:%i - %s – If link has MTP3 layer, then this string equals:(SP %i linkset %i slc %i)Where:%i - %i - %i - Otherwise there is NO additional text.%s - : { “UNCONGESTED”, “CONGESTED” }Additional Info1 varbindCONGESTEDCondition:Link becomes un-congested (local AND remote).Alarm status:ClearedCorrective Action:Reduce SS7 traffic on that link.This alarm is raised for any change in the remote or local congestion status.Log Traps (Notifications)This section details traps that are not alarms. These traps are sent with the severity varbindvalue of ‘indeterminate’. These traps don’t ‘clear’, they don’t appear in the alarm history oractive tables. One log trap that does send clear isacPerformanceMonitoringThresholdCrossing.Table 104acKeepAlive Log TrapTrap:acKeepAliveOID:1.3.6.1.4.1.5003.9.10.1.21.2.0.16Default SeverityIndeterminateEvent Type:other (0)Probable Cause:other (0)Trap Text:Keep alive trapStatus Changes:Condition:The STUN client in is enabled and identified a NAT device or doesn’t locatethe STUN server.Theinifile contains the following line: ‘SendKeepAliveTrap=1’Trap status:Trap is sentKeep-alive is sent every 9/10 of the time defined in the parameterNatBindingDefaultTimeout.
