V6100 and V7122 User Guide 453To install the Hard Drive (HDMX) module, follow these 6 steps:1 Place the V6100, so that the rear panel is facing you, as shown in Figure 151.2 Remove the black metal cover plates in the first and second slots located on the rightside of the power connection, as shown in Figure 152.3 Use the cutter tool to remove the small metal strip between the upper and lower slots, asshown in Figure 153.4 Insert the Hard Drive (HDMX) module in the second slot, as shown in Figure 155.Figure 155 Inserting the HDMX Module5 Push the Hard Drive (HDMX) module into the slot and press on it firmly to ensure it hasbeen fully inserted.6 Using a straight regular screwdriver, tighten the mounting pins.Reader’s Notes
